Beelink SER3 Ryzen 7 Mini PC User Manual

June 4, 2024
Beelink

Beelink SER3 Ryzen 7 Mini PC

beelink ser3 ryzen 7 mini pc

BASIC OPERATION

beelink ser3 ryzen 7 mini pc 1

Button & Ports

  1. USB port
  2.  Type-cport
  3.  MIC headphone jack
  4.  power button
  5.  LAN port
  6.  HDMIport
  7. DCin port

VESA MOUNT INSTALLATION  GUIDEbeelink ser3 ryzen 7 mini pc
2

  • Wall-Mounted bracket
  • fix bracket on MINI PC with screws
  • fix bracket on the back of display with screws

The following operations should be started with the power off

DDR Memory Installation. (As shown in the picture)

  1. Align the memory module key along with the memory socket key and insert the memory at a 30-degree angle, Slide the module into place.

SSD Card Installation. (As shown in the picture)

  1. Align the notches on the SSD with the tabs in the M.2 slot on the motherboard.
  2. Slide ssd in then secure the SSD with a screw.

CONNECTION STEPS

  •  Connect the power supply
  •  Connect to the monitor with an HDMI cable
  •  Connect the keyboard and mousebeelink ser3 ryzen 7 mini pc 6

How to Change Your Audio Playback Devices on Windows

Connect speakers, headphones, a webcam with a built-in microphone, a Bluetooth headset, or other audio devices to your Windows PC and you’ll need to choose which devices Windows actually uses.

  •  Just click the sound icon in your notification area(also known as the system tray).
  •  Click the”Select playback device” option.
  •  Select the playback the device you want to use from the menu.beelink ser3 ryzen 7 mini pc 7

CAUTION

  • In order to continue to improve the user experience, we may occasionally update the app and firmware.
  • Do not use harsh chemical solvents, or cleaning products, We recommend using a soft cloth to wipe.
  • Do not throw the product into the fire, avoid having fire accident.
  • Do not attempt to open the housing or to repair it, if a failure occurs, please contact customer service.
  • Please note seepage while cleaning electronics, be careful of electric shock.
  • Check for any frayed or damaged cords or plugs.
  • Don’t arbitrarily discard the product, we should protect the environment.
  • Operating environment:-10°C-45C, 309%-85% humidity.
  • Storage environment:-20°c-60″C, 10%-90% humidity

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not ocur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  •  This device may not cause harmful interference
  •  this device must accept any interference received, including interference that may cause undesired operation.

Cautions

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure com Power-on and Wake-on-LAN, setting guide file storage path (Select the corresponding file according to the machine model): C:Power On and WOL System drive file storage path: C:\Driver

After service

Email
MiniPC: Support-pc@bee-link.com
TV BOX: Support-box@bee-link.com
Sales : Wholesale@bee-link.com
Call us! +86-755-36633117/36633118
Manufacturer: Shenzhen AZW Technology co., Ltd Address: 4th Floor, Building 18, Longjun Industrial Park, Bujiuwo, Longhua New District,Shenzhen, China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals