Anykit AKTS43D55L5 Endoscope Inspection Camera User Manual

Anykit AKTS43D55L5 Endoscope Inspection Camera

Product Information: Digital Inspection Endoscope Model No TS43

The TS43 is a high-performance industrial endoscope that features a 4.3-inch high-definition color screen. It is equipped with an LED ring light and a small-diameter HD camera that uses a high-sensitivity chip to provide the best view even in the darkest places. The endoscope also supports photo and video recording functions, which can be saved to a Micro-SD (TF) memory card.

Warning: This product is intended for industrial use only and should not be used for medical purposes or human examination. Safety and Maintenance

• The camera probe is a delicate electronic device, so avoid hitting or pulling on the cable.

• The camera probe features a waterproof protective layer, so take extra care to avoid scratching it during usage.

• The camera probe materials are not resistant to high temperatures. When examining any combustion engine, ensure that the temperature inside the engine has cooled down.

• This product is not suitable for people with limited physical,sensory, or mental capabilities.

• Do not allow children to touch or operate this device.

• If the device is damaged, do not disassemble it yourself.
  Please contact the seller or agent where you bought it to get repair service.

• Charge the device at least once every 3 months to prevent irreparable damage caused by excessive battery discharge.

Functions

1. Camera probe
2. Up selection button: Zoom
3. Down selection button: Rotate
4. Mode switch button: switch between three function modes: Photo taking, video recording, and playback
5. Enter button: Confirm selection/ Freeze screen/ Play/ Pause
6. Settings button: Enter/ Exit settings menu
7. Snap button: Photo taking/ Start video recording/ End video recording/ Press and hold the button for a few seconds to switch between the front-view camera and side-view camera
8. Power button: Press and hold the Power button to turn ON/OFF
9. Light control button: To adjust the LED’s brightness of the camera
10. Charging port
11. Reset button
12. TF card slot (Micro SD)

Product Usage Instructions

To turn ON/OFF the device, press and hold the Power button for a few seconds.

To insert a Micro-SD (TF) memory card, power off the device first. Make sure the direction and the front and back sides are correct when inserting the TF card. Do not use excessive force when inserting or removing the TF card to prevent damages to the card slot structure.

Press the Settings button to enter the menu. Select language setting, and press the up and down button to select the desired language. Press the OK button to save changes.

To switch between the three modes (photo taking, video recording, and playback), press the Mode switch button.
To take a photo, press the Snap button.
To start or stop video recording, press and hold the Snap button for a few seconds.
To adjust the LED’s brightness of the camera, use the Light control button.
To freeze the screen or play/pause during playback mode, press the Enter button.

Remember to charge the device at least once every 3 months to prevent damage caused by excessive battery discharge.

Product Manual

TS43 is a high-performance industrial endoscope with a 4.3-inch high- definition color screen. Photo and video recording functions are supported, and saved to a TF memory card (Micro-SD card). This product is equipped with an LED ring light and a small-diameter HD camera. The camera uses a high- sensitivity chip to get the best view in the darkest places.
Warning: This product is an industrial endoscope camera and is not intended for medical use or human examination.

Safety and Maintenance

• The camera probe is a delicate electronic device, do NOT hit the camera probe,Do NOT pull on the cable.
• The probe features a waterproof protective layer so take extra care to avoid it from being scratched during usage.
• The camera probe materials are not resistant to high temperature. When examining any combustion engine, please ensure that temperature inside the engine has cooled.
• This product is not suitable for people with limited physical, sensory or mental capabilities.
• Do NOT allow children to touch or operate this device.
• In case the device is damaged, Do NOT disassemble it by yourself. Please contact the seller or the agent where you bought it to get repair service.

Battery description

• Please use a 5V household charger that meets safety regulations to charge this device.
• This device can work while charging.
• If you do not use the device for a long time, please ensure that it is charged at least once every 3 months to prevent irreparable damage caused by excessive battery discharge.

Product Functions

1. Camera probe

2. Up selection button: Zoom Down selection button: Rotate

3. Mode switch button: switch between three function modes:
   Photo taking, video recording and playback

4. Enter button: Confirm selection/ Freeze screen/ Play/ Pause

5. Settings button: Enter/ Exit settings menu

6. Snap button: Photo taking/ Start video recording/ End video recording/Press and hold the button for a few seconds to switch between the front-view camera and side-view camera

7. Power button: Press and hold the Power button to turn ON/OFF

8. Light control button: To adjust the the LED’s brightness of the camera

9. Charging port

10. Reset button

11. TF card slot (Micro SD)

Instructions

Insert TF card:

• Power off device first before insert TF card
• Make sure the direction and the front and back sides is correct wheninsert the TF card
• Do not use excessive force when inse rting or removing the TF card to prevent damages of card slot structure.

Use equipment

Language Settings

The default language is English, and the system supports English, Simplified Chinese, German, French, Spanish, Italian, Russian, Japanese, Traditional Chinese, Korean and Portuguese.

Setting path:

1. Press the “Settings” button to enter the menu.
2. Select language setting.
3. Press the up and down button to select the desired language.
4. Press the“OK”button to save changes.

Photo taking/Video recording/Playback

• Press to switch to the“photo-taking” or“video recording” mode, and press to take a photo or start recording.
• Press to switch to playback mode, press to select photo or video to view, and press to delete photo or video.

Copy photo and video files to computer
You can sue a TF card reader to copy data directly or use a Micro USB cable to connect to a computer for copying

Setting path:

1. Press the “Settings” button to enter the menu.
2. Data transmission setting.
3. Press the “OK” key to start copying to computer.

When copying, if the machine is not connected with the computer, click ” Data transmission” on the setting screen, the machine will prompt that no machine is recognized and automatically shut down after 5S. To restart the machine, press and hold the Start button to start it.

Specifitcation Parameters

Screen

• Screen: 4.3-inch HD Display
• Screen resolution(Pixels): 480×272
• Support probe resolution(Pixels): 1.0 Megapixel HD
• Snapshot resolution(Pixel): 1920×1080
• Video Recording resolution(Pixel): 1280×720
• Port： Micro charging port, TF memory card slot

Camera

Others

• Operating Temperature: 32°F to 113°F (0°C to 45°C)
• Power Source: 2000 mAh Lithium Battery
• Max battery life: 2.5-3 hours
• Charging time: 3 hours

Packaging
Monitor, Micro charging cable, user manual
Accessories: pick up hook, magnet,
mirror(Only the camera of single lenses with a side-view mirror)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>