ANYKIT MS500 Digital Otoscope User Manual

October 30, 2023
ANYKIT

ANYKIT MS500 Digital Otoscope

ANYKIT-MS500-Digital-Otoscope-PRODUCT

Product Manual

MS500 is a high performance otoscope with a 5.0-inches high def inition color IPS screen. It is ergonomically designed so that users can control the main buttons with just 1 hand. The snapshot and recording functions are supported, photos and videos can be saved on TF memory card
(Micro-SD card).

WARNING:

  • You must read the instruction manual carefully before using.
  • You must put the protective cover onto the otoscope before using, then sanitize all the areas that contact the skin.
  • Keep out of reach of children. Children are not allowed to use this product.
  • Please take great care when using ear picks to clean earwax. DO NOT insert them too far into the ear canal.
  • Stop using the otoscope if it overheats.
  • When using this product be aware of people around you. Be careful that nobody bumps into your hand while holding the device in your ear.
  • Stop using this product immediately if you experience any discomfort.
  • This product can not replace a doctor or medical provider’s diagnosis or treatment. Contact your doctor immediately if you experience any discomfort.

Safety and Maintenance

  • Make sure you disinfect the adapter.
  • Clean the surface of the device with 75% medical alcohol before contacting with the skin.
  • Disinfect the adapters with saturated steam for 10minutes at 134℃ or 273 ℉.
  • This appliance is not suitable for people with limited physical , sensory or mental capabilities.
  • Keep bystanders and children away while operating the tool.

Battery Description

  • Please use 5V household charger that meets the safety requlations to charge this device.
  • This device Do not support PD charger.
  • This device can work while charging.
  • If you do not use the device for a long time, please ensure that it is charged at least once every 3 months to prevent irreparable damage caused by excessive battery discharge.

Functions

  1. Camera probe connector.
  2. Snap button : Photo taking/Start video recording/End video recording.
  3. Light control button : To adjust the the LED’s brightness of the camera.
  4. Up and down selection button/Left and right mirror image.
  5. Mode switch button : switch between three function modes: Photo taking,video recording and playback.
  6. Enter button : Confirm selection/freeze screen
  7. Settings button : enter/exit settings menu.
  8. Power button : Press and hold the Power button to turn ON/OFF.
  9. TF card slot
  10. Charging port
  11. Speaker
  12. Installation hole of Screen bracket
  13. Reset button
  14. Microphone

Instructions

  • Long press the power button to turn on/off device.
  • The device is equipped with a TF memory card(inserted). Gently press to eject the card.

ANYKIT-MS500-Digital-Otoscope-FIG-3

Noties:

  • The ear canal is not perfectly straight, gently adjust the position of the otoscope to view your ear drum clearly.
  • Please adjust the brightness of the LED lights when using this otoscope to prevent glare.
  • The focal length of the camera is fixed at 1.5-3cm or 1.0-inch please adjust the distance between the camera lens and your ear to get focused if you can not see the image clearly.
  • Plug in the Type-C charging cable to charge
  • Note :Connect the camera probe before turning on device.Restart device after replacing the camera probe.

Insert TF card

  • Power off device before insert TF card.
  • Make sure the direction and the front and back sides is correct when insert the TF card.
  • Do not use excessive force when inserting or removing the TF card to prevent damages of card slot structure.

ANYKIT-MS500-Digital-Otoscope-FIG-6

Language Settings

The default language is English, and the system supports English, Chinese, German,French, Spanish, Italian, Russian, and Japanese.

Setting path:

  • Press the button twice to enter setting page.
  • Select second item(Language)on settings page.
  • Press up and down keys to select the language you need.
  • Press to save your choice.

Photo taking/Video recording/Playback

  • Press to switch to the photo taking or video recording mode, and press to take a photo or start recording.
  • Press to switch to playback mode, press to select photo or video to view,and press to delete photo or video.

Copy photo and video files to computer

ANYKIT-MS500-Digital-Otoscope-FIG-13

You can use a TF card reader to copy data directly or use a type-C cable to connect to a computer for copying. Please pull out probe camera first before using Type-C cable.

Specification Parameters

Screen

  • Screen 5.0-inches IPS HD Display
  • Screen resolution(Pixels) 854×480
  • Snapshot resolution(Pixel) 1920×1080
  • Video Recording resolution(Pixel) 1280×720
  • Port Type-C charging port,TF memory card slot

Camera

  • Diameter 3.9mm or optional
  • Viewing angle 70°
  • Depth of Field 15mm-30mm
  • Light Source 6 adjustable high-intensity LEDs

Others

  • Operating Temperature 32°F to 113°F (0°C to 45°C)
  • Power Source 2500mAh Lithium Btatery
  • Max battery life about 3.5~4 hours
  • Charging time about 3 hours

Packaging

  • Monitor
  • Otoscope
  • Type-C charging cable
  • user manual
  • Screen Bracket
  • Accessories-Specula, Ear-pick

After-sales Service
If there is any question, feel free to contact us, Anykit team here will always offer you best supports.

Manufacturer Service

support@anykit.com 1-877-888-7979 (US) (Mon-Fri 8:00 AM-5:00 PM PST)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals