ANYKIT AN430 Digital Inspection Camera User Manual
- March 8, 2024
- ANYKIT
Table of Contents
ANYKIT AN430 Digital Inspection Camera User Manual
READ BEFORE USE
By using this product, you signify that you have read, understand, and accept the terms and conditions here. Read the following documents before using.
- Safety Guidelines
- Quick Start Guide
- User Manual
It is recommended to watch all tutorial videos on the official Anykit website and read the safety guidelines before using. Prepare for your first use by reviewing the quick start guide and refer to this user manual for more information.
Video Tutorials
Scan the QR code to watch the AN430 tutorial videos, which demonstrates how
to use the AN430 safely.
ONLINE MANUAL
Scan this QR code to get the manual in PDF, which can be enlarged and viewed
on your mobile device.
OVERVIEW
Features
- 4.3 inches IPS Screen
- 180° Image Rotation
- Adjustable LED lights
- User-friendly Design
Applications
- Automotive or diesel repair and maintenance
- Inspection of hard-to-reach or hard-to-see areas or equipment, plumbing, construction & restoration applications
- Scientific education
- Outdoor exploration
SAFETY INSTRUCTION
WARNING! Please read all safety warnings and instructions before using this product. Failure to follow these warnings may result in electric shock, fire or serious injury.
- Keep the tool dry, clean, free from oil, water, gas or other materials that may cause corrosion.
- Keep your work area clean and well lit.
- This appliance is not intended for use by persons with limited physical, sensory or mental capabilities.
- This appliance is not intended for medical use or personal inspection.
- Keep bystanders, and children away while operating the tool.
- Do not overreach, keep proper footing and balance at all times.
ABOUT ANYKIT
ANYKIT
Anykit is a trendy and practical tool brand. We focus on simplicity and ease
of use, providing people with convenience in their everyday lives. Our
products including otoscopes, endoscopes, and a variety of household tools to
enable DIY enthusiasts to embrace creativity and convenience,
Follow Anykit on Amazon for More
KNOW YOUR PRODUCT
SPECIFICATIONS
ONE-CLICK ACTIVATION
Step 1: Remove the plastic screen cover.
Step 2: Switch the Camera On/Off (press and hold the for a few seconds).
Step 3 : Low Battery Indicator (If the battery icon on the screen shows
low battery, please charge it fully before using it).
Step 4 : Once the lens angle is adjusted, it is ready to be used.
USEFUL ACCESSORIES
HOW TO ATTACH ACCESSORIES
Unscrew the thread protector, then screw on the accessory.
Hook
Magnet
Mirror
DISPLAY
The AN430 High-definition display, with its clear screen and easy operation, offers convenience and efficiency like no other inspection camera.
MAINTENANCE
Cleaning Tips
- Turn off and unplug the device before cleaning.
- Clean the camera lens before and after each use with a soft microfiber cloth and a cotton swab to get the best image quality from your inspection camera.
- For stubborn stains, use warm water or rubbing alcohol. DO NOT use stronger solvents.
- Clean dust and fingerprints off the monitor using a microfiber cloth and warm water or rubbing alcohol.
- Never use abrasive cleaners, chemicals, or solvents as they can damage the device’s surface or internal components.
- Avoid getting moisture in any openings or ports of the device.
- Allow the device to fully dry before using it.
Storage
- Make sure the power is turned off before storage.
- When not used, please store the product in a dry, cool, well-ventilated агев.
- When coiling a flexible Anykit camera probe, DO NOT bend the probe into too tight of a radius. Coil the probe gently. If you experience any resistance, then the probe is coiled too tightly. A good rule of thumb is to not coil it any tighter than it was sent in its original packaging.
- Keep the device out of direct sunlight, extreme temperatures, and humid environments.
- Store the device away from sharp objects, heavy items, or anything that could cause damage to it.
- Avoid storing the device near magnets or devices that generate strong magnetic fields.
- If storing the device for an extended period, ensure it is fully charged and turned off completely.
TROUBLESHOOTING
Cannot be turned on| Insufficient power, you should charge it and then try to
turn it on
---|---
Auto shutdown| The probe will automatically shut down when it exceeds the
protectiontemperature, you can try to turn it on again after it cools down
Unable to charge| Try charging the device with a different cable or power
adapter
Blurred picture| Adjust to the best focal distance, if the lens is dirty,
please clean with water
Lens light does not light up| After turning on, the light is in the off state,
try to adjust the light brightness
*If you have any problems with the product, you can contact our customer support team and we will give you feedback within 24 hours.
WARRANTY
Visit anykit.com or scan the QR code for more details.
CUSTOMER SUPPORT
If you have any questions or concerns about your product, please contact our
Customer Support Team
1-877-888-7979 Mon.-Fri. 8:00-5:00 PST (US)
support@anykit.com
www.anykit.com
@anykit
YouTube
@anykit
Facebook Messenger