ANYKIT STLB-2001 Electric Leaf Blower Battery Cordless Electric Leaf Blower User Manual

ANYKIT STLB-2001 Electric Leaf Blower Battery Cordless Electric Leaf

Blower

SPECIFICATIONS

• Model: STLB-2001
• Voltage: 20V
• No load speed: 13000-16000r/min
• Max air volume:
• Max air speed: 88.4 MPH (39.5m/s)
• Capacity of battery: 3.0Ah (2 PACK)
• Charger input: 100-240V 50/60Hz 1.5A
• Charger output: 5V 2.0A
• Run time: 16 minutes (Low speed), 7 minutes (High speed)
• Charging time: Approx. 90min (for one battery pack)
• Sound power level: 76 dB (Low speed), 92 dB (High speed)
• Product weight (without battery pack): 4.54 lbs
• Leaf blower recommended operating temperature:
• Battery pack recommended storage temperature:

PRODUCT USAGE INSTRUCTIONS

KNOW YOUR PRODUCT
Identify the key components of the leaf blower:

1. Blower Tube
2. Tube Release Button
3. Turbo Button
4. Handle
5. Battery Release Button
6. Battery Pack
7. On/Off Trigger
8. Battery LED indicators
9. Charger

ASSEMBLY

Blower Tube Assembly
To assemble the blower tube:

• Align the groove in the tube with the knob on the blower housing.
• Slide the nozzle over the blower outlet opening until the latch on the blower is inserted into the opening on the nozzle and snaps into place.

Cordless Blower Blower Tube Removal
To remove the tube, press and hold the tube-release button to disengage the latch, then pull the tube straight from the blower.

PREPARATIONS

• Check the Battery Pack Capacity
  Check the battery pack capacity by pressing the button and observing the indicator lights to determine the remaining capacity.

• Charging the Battery
  Ensure the battery is fully charged before use by connecting it to the charger and following the charging instructions provided in the user manual.

FAQ

• Q: How do I access the online manual for the leaf blower?
  A: You can access the online manual by scanning the QR code provided in the user manual with your mobile device.

• Q: What is the recommended run time for the leaf blower?
  A: The leaf blower has a run time of approximately 16 minutes on low speed and 7 minutes on high speed with one battery pack.

OVERVIEW

Features

• Cordless
• Turbocharging
• Battery level display
• Super large air volume mode

APPLICATIONS

• Blow debris or grass clippings off driveways, sidewalks, patios, parks, parking lots, etc.
• Gather grass clippings, straws, or leaves into piles. Remove debris from corners, around joints, and between bricks.

SAFETY INSTRUCTIONS

Warning! Please read safety warnings and instructions before using this product. Failure to follow these warnings may result in electric shock, fire, or serious injury.

READ BEFORE USE

By using this product, you signify that you have read, understand, and accept the terms and conditions here.

Read the following documents before using

1. Safety Guidelines
2. Quick Start Guide
3. User Manual

It is recommended to watch all tutorial videos on the official Anykit website and read the safety guidelines before using.
Prepare for your first use by reviewing the quick start guide and refer to this user manual for more information.

VIDEO TUTORIALS
Scan the QR code to watch the STLB-2001 tutorial videos, which demonstrates how to use the STLB-2001 safely.

ONLINE MANUAL
Scan this QR code to get the manual in PDF, which can be enlarged and viewed on your mobile device.

ABOUT ANYKIT

Anykit is a trendy and practical tool brand. We focus on simplicity and ease of use, providing people with convenience in their everyday lives. Our products include leaf blowers, endoscopes, and various household tools to enable DIY enthusiasts to embrace creativity and convenience.

Follow Anykit on Amazon for More

SPECIFICATIONS

KNOW YOUR PRODUCT

to the maximum

Battery-Release Button| Releases the battery pack

from the blower

Tube Release Button| Releases the tube from

the blower

Battery LED indicators| Shows the battery level

at 40%, 70%, and 100%

1. Blower Tube
2. Tube Release Button
3. Turbo
4. Handle
5. Battery Release Button
6. Batter Pack
7. On/Off Trigger
8. Battery LED indicators
9. Charger

ASSEMBLY

Preparing to Assemble the Blower
Take care not to lose any instructions. These provide important information which will be required while attaching the blower.

• Remove all parts of the cordless blower from the box and carefully remove all packaging.
• Keep all packaging until the blower is fully assembled and has been operated successfully.
• Always recycle the packaging in accordance with local recycling regulation.

Blower Tube Assembly
Align the groove in the tube with the knob on the blower housing. Slide the nozzle over the blower outlet opening until the latch on the blower is inserted into the opening on the nozzle and snaps into place.

Blower Tube Assembly
To remove the tube, press and hold the tube-release button to disengage the latch, then pull the tube straight from the blower.

PREPARATIONS

Check the Battery Pack Capacity

• Battery LED indicators
• Check the battery pack capacity by pressing the button.

Charging the Battery

1. Align the battery pack with the slots on the charger and slide it until it locks in place.
2. Plug the charger cord into a suitable socket.
3. When the charging indicator turns green disconnect the charge from the power supply.

Charger indicator lights

• Red light: charging
• Green light: fully charged

Charging the Battery
Press the release button on the battery pack and remove the battery from Charger.

Battery Assembly
Push the battery pack into the handle until the latch locks into place .

OPERATION

Switching On/Off

1. Press the On/Off trigger to turn on the blower.
2. Press and hold the On/Off Trigger and Turbo button simultaneously for high-speed operation.
3. Release the On/Off trigger to turn off the blower.

USER TIPS:
Hold the blow tube approx 7”above the ground when operating the blower. Use a sweeping motion from side to side. Advance slowly keeping the accumulated debris/leaves in front of you.
After blowing the debris/leaves into a pile, it is easy to dispose of the pile.

MAINTENANCE

The recommended ambient temperature range:

Item| Temperature
Blower storage temperature range| 32°F (0°C) – 113°F (45°C)
Blower operation temperature range| 32°F (0°C) – 113°F (45°C)
Battery charging temperature range| 39°F (4°C) – 104°F (40°C)
Charger operation tempera ture range| 39°F (4°C) – 104°F (40°C)
Battery storage temperature| 32°F (0°C) – 113°F (45°C)
Battery discharging tempera ture range| 32°F (0°C) – 113°F (45°C)

Cleaning

• Remove the battery pack.
• Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep the air vents free of obstructions, sawdust, and wood chips. Do not spray, wash, or immerse the air vents in water.
• Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong solvents or detergents on the plastic housing or plastic components. Certain household cleaners may cause damage or a shock hazard.

Battery Maintenance

• Store the battery pack fully charged.
• Recharge the battery pack whenever there is a noticeable reduction in the performance.
• Do not allow the battery pack to become completely discharged.
• Do not recharge a battery pack that is already fully charged. Overcharging shortens battery life.
• Once the battery pack is fully charged, remove the battery from the charger and disconnect the charger from the outlet.
• Do not store the battery pack on the tool or in the charger.
• Recharge the battery at a temperature between 5°C and 50°C.
  If the battery pack is hot, allow it to cool down before recharging.

Charger Maintenance
Keep the charger clean and clear of debris. Do not allow foreign material into the recessed cavity or on the contacts. Wipe with a dry cloth. Do not use solvents, or water, or place in wet conditions.

• Always unplug the charger when there is no battery pack in it.
• Give the batteries a full charge before placing them in storage. Do not recharge a fully charged battery pack. Overcharging shortens the battery life.
• Recharge the battery pack whenever there is a noticeable reduction in the performance. Never let the batteries become completely discharged.
• Keep the charger stored at normal room temperature. Do not store it in excessive heat. Do not store in direct sunlight.
• Disconnect the charger from the AC power outlet when not in use and once the battery has reached a full charge.

Storage

• Store idle tools. When not in use, the unit should be stored in a dry, high or locked-up place – out of reach of children.
• Keep the blower and its handle dry, clean and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean your blower. Following this rule will reduce the risk of loss of control and deterioration of the enclosure plastic.
• Always remove the battery pack from the product when you are assembling parts, making adjustments, cleaning, or when the product is not in use.
• Shock Hazard. Do not pour or spray water on the blower in an attempt to clean.
• To avoid serious personal injury, always turn off the unit, disconnect the power supply and remove the battery pack from the product when cleaning or performing any maintenance.
• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of solvents and may be damaged by their use.
• Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
• Please charge the battery pack， when not in use for over 3 months, to save battery life.

The recommended ambient temperature range:

TROUBLESHOOTING

WARRANTY

30-Day Guarantee

| We will give you a full refund if you are not satisfied with the product.
---|---

One-Year Warranty

| We offer a limited warranty that commences from the date of purchase of the product.

Visit anykit.com or scan the QR code for more details.

CUSTOMER SUPPORT

If you have any questions or concerns about your product, please contact our Customer Support Team

• 1-877-888-7979
• Mon.-Fri. 8:00-5:00 PST(US)
• support@anykit.com
• www.anykit.com
• @anykit
• @anykit
• Facebook Messenger

References

• AnyKit
• AnyKit

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>