SPANSION SK-FM3-9BF516N-TOUCHKIT Evaluation Board User Guide

FM3 FAMILY
EVALUATION BOARD
SK-FM3-9BF516N-TOUCHKIT
USER GUIDE

Revision History

This document contains 12 pages.

Warranty and Disclaimer

The use of the deliverables (deliverables shall include, but not be limited to, software, application examples, hardware, target boards, evaluation boards, starter kits, schematics, engineering samples of ICs, etc.) is subject to the terms and conditions of Spansion LLC and its affiliates (“SPANSION”) as set out below and in (i) the terms and conditions of the License Agreement and/or the Sale and Purchase Agreement and/or any other agreement under which deliverables have been delivered, (ii) the technical descriptions and (iii) all accompanying written materials.

1. Please note that the deliverables are intended for and must only be used for test applications in an evaluation laboratory environment.
2. The software deliverables are provided on an as-is basis without charge and are subject to alterations. It is the user’s obligation to fully test the software in its environment and to ensure proper functionality, qualification, and compliance with component specifications.
3. Regarding hardware deliverables, the following limited warranty shall apply:

Except as otherwise provided in the following paragraphs, for a period of one (1) year from the date of shipment to the customer (“Warranty Period”), SPANSION warrants the hardware deliverables (i) is free of defects in material and workmanship, and (ii) conform to SPANSION applicable data sheet specifications (available at www.spansion.com or upon request).

This warranty does not extend beyond the first purchaser of the deliverables. The liability of SPANSION under this warranty is limited, at SPANSION’s option, solely to repair the deliverable, to send a replacement deliverable, or to make an appropriate credit adjustment or refund in an amount not to exceed the original purchase price actually paid for the deliverable returned to SPANSION. SPANSION’S warranty obligations are conditioned upon the following: (a) SPANSION is promptly notified in writing by the customer during the applicable warranty period of any defect or nonconformance in the deliverable, (b) the customer obtains authorization from SPANSION to return the defective deliverable, (c) the defective deliverable is returned to SPANSION in accordance with SPANSION’S shipping instructions set forth below, and (d) SPANSION’S examination of such deliverable discloses to its satisfaction that any defect or nonconformance actually existed and was not caused by improper use or operation outside of the data sheet specifications for the deliverable, abuse, negligence, improper installation, accident, loss or damage in transit, or unauthorized repair or alteration by a person other than SPANSION. The customer shall ship such defective deliverable to SPANSION via SPANSION’S carrier, and collect. The risk of loss will transfer to SPANSION when the defective deliverable is provided to SPANSION’S carrier. If a customer fails to adhere to these warranty returns guidelines, the customer shall assume all risk of loss and shall pay for all freight to SPANSION’S specified location. This warranty shall not apply to any deliverables that have been repaired or altered, except those which have been repaired or altered by SPANSION. The aforementioned provisions do not extend the original warranty period of any deliverable that has either been repaired or replaced by Seller.

THESE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, AND ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION, OR SAMPLE. SPANSION NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITIES. THE FOREGOING CONSTITUTES THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY FOR THE FURNISHING OF DEFECTIVE OR NONCONFORMING DELIVERABLES.

4. The following limitation of liability shall apply to all deliverables

EXCEPT FOR DAMAGES FOR BODILY INJURY OR DEATH, SPANSION SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, RELIANCE, OR CONSEQUENTIAL DAMAGES, RELIANCE DAMAGES, AND/OR PUNITIVE, OR EXEMPLARY DAMAGES, WHETHER ANY SUCH DAMAGES ARE BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY, AND WHETHER OR NOT SPANSION HAS BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES, AND NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.

REGARDLESS OF THE BASIS ON WHICH THE CUSTOMER IS ENTITLED TO CLAIM DAMAGES FROM SPANSION (INCLUDING FUNDAMENTAL BREACH, NEGLIGENCE, MISREPRESENTATION, OR OTHER CONTRACT OR TORT CLAIM), SPANSION’S ENTIRE LIABILITY IN ANY CALENDAR YEAR, REGARDLESS OF THE NUMBER OF CLAIMS, SHALL NOT EXCEED FIFTY PERCENT (50%) OF THE TOTAL AMOUNT PAID BY CUSTOMER TO SPANSION FOR THE DELIVERABLES SOLD IN SUCH CALENDAR YEAR.

5. Should one of the above stipulations be or become invalid and/or unenforceable, the remaining stipulations shall stay in full effect.
The contents of this document are subject to change by SPANSION without prior notice, thus contact SPANSION about the latest one
This board and its deliverables must only be used for test applications in an evaluation laboratory environment.

Overview

1.1 Abstract
The SK-FM3-9BF516N-TOUCHKIT contains an SK-FM3-100PMC-9BF516N Starter Kit and an ADA-FM3-100PMC-TOUCH-SSBS touch electrode board with four buttons, a scroll wheel with three elements, and a slider with five elements. In addition, a shield ring driven is provided, which can be used to decouple the touch electrodes from the surrounding ground pattern.

1.2 Features of the ADA-FM3-100PMC-TOUCH-SSBS adapter board

• Directly connectable to SK-FM3-100PMC or SK-FM3-100PMC-9BF516N Starter Kits
• Direct mount or via a short ribbon cable
• Optional pin headers for ‘free-wire’ connections
• Plastic cover

1.3 Features of the SK-FM3-100PMC-MB9BF516N

• 1x UART-Transceiver (SUB-D9 connector)
• 1x USB to serial converter (Type-B connector)
• 1x High-speed CAN-Transceiver (SUB-D9 connector)
• 1x USB Host / USB Function connector
• 2x LED display (MODIFIED: 7-Segment SEG1 disconnected to free ADC pins)
• 2x User-button
• 1x Reset-button, Reset-LED
•  All 100 pins routed to pin-header
•  On-board 5V and 3V voltage regulators, Power-LED
•  USB power supply (external power supply possible)

For further details about the SK-FM3-100PMC-MB9BF516N Starter Kit, please refer to the documentation on the accompanying CD.

Hardware

2.1 Installation
Remove carefully the board from the shipping box and check for any damages.
Check the content of the box

1x ADA-FM3-100PMC-TOUCH-SSBS
1x SK-FM3-100PMC-MB9BF516N Starter Kit Modified (RN1 and RN2 removed) and pre- programmed
1x CD / DVD
1x Ribbon Cable
1x USB cable
1x User guide and schematics of the ADA-FM3-100PMC-TOUCH-SSBS

Disconnect the evaluation board from the USB and any external power supply.
Attach the adapter board to the evaluation board so that X1 on the bottom side of the adapter board and X22 on the evaluation board align. Press both boards together.
In case the ribbon cable is used (recommended), connect the female connector (black) to X22 on the MCU Board and the male (grey) connector to the adapter board as shown in the picture below.

NOTE:
On the SK-FM3-100PMC-9BF516N Starter Kit, the 7-segment LED display SEG1 is connected to the MCU on port pins which are used by the ADA-FM3-TOUCH-SSBS as touch inputs. In order to make full use of the touch electrodes, the resistor networks RN1 and RN2 were already removed from the starter kit to disconnect SEG1.

Therefore, SEG1 is not operational on the modified Starter Kit contained in this package.
Please refer to the documentation of the evaluation board (on CD) for detailed information about the USB driver installation and jumper settings of the SK- FM3-100PMC- 9BF516N. No special jumper settings on the Starter Kit are required for the ADA-FM3-100PMC-TOUCHSSBS.

Connection of the touch electrodes:

FMtouch software

3.1 CalTool
Calpol is a graphical PC frontend to monitor and tune touch parameters, such as sensitivity, etc. Calpol can be installed from the CD included in the Starter Kit package, or from the web page shown below. By default, the communication is done via X5 (USB virtual COM port). Please refer to the SK- FM3-100PMC-MB9BF516N documentation for details about jumper settings and driver installation.

3.2 Other FMtouch packages
Ready-to-use FMtouch example projects are available for different hardware setups. These can be found on the CD included in the Starter Kit package or downloaded from the
webpage below.

3.3 Further information
Further information about FMtouch can be found in the application note ‘FMx_AN706-00085’ included on the CD in the starter kit package, or the web page below: http://www.spansion.com/Products/microcontrollers/32-bit-ARM- Core/fm3/pages/touch.aspx

Information in the WWW

Information about SPANSION INC Products can be found on the following Internet pages:
Microcontroller Products
http://www.spansion.com/Products/microcontrollers

Power Management Products
http://www.spansion.com/Products/Analog

Memory Products
http://www.spansion.com/Products/memory

For more information about SPANSION INC.
http://www.spansion.com

China-RoHS regulation

This board is compliant with China RoHS.

Recycling

CCS Express GMBH c/o Spansion International Inc.
Frankfurter Str. 83-107 D-65479 Raunheim Germany

Valid for European Union Countries:
According to the European WEEE-Directive and its implementation into national laws, we take this device back.

For disposal please send the device to the following address:
CCS Express GMBH
c/o Spansion International Inc.
Frankfurter Str. 83-107
D-65479 Raunheim
Germany MCU-UG-9B0007-11
Downloaded from Arrow.com.

References

• Semiconductor & System Solutions - Infineon Technologies
• Power Management ICs (PMIC) - Infineon Technologies
• Memories - Infineon Technologies
• Microcontroller - Infineon Technologies
• Microcontroller - Infineon Technologies

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>