KARL HOME 302992573365 Black 5-Tier Metal Freestanding Garage Storage Shelving Unit Instructions
- June 5, 2024
- KARL HOME
Table of Contents
KARL HOME 302992573365 Black 5-Tier Metal Freestanding Garage Storage
Shelving Unit Instructions
WIRE SHELVING INSTRUCTION
Assembly Steps:
-
Screw the Nylon Casters (E) into the bottom of four Lower Poles (B) f,’\ and fastened by wrench,Snap Plastic Clips (D) onto the pole grooves ~ of four lower poles at the same position and make sure that the arrow of plastic clips are pointing up.
-
Please make sure Wire Shelf (A) the correct way up. Hold the wire shel on its side and slide the top of four lower poles through the bottom o each shelf at its corners until there is snug fit . After 4 poles have been
slid through the shelf collar holes, set the shelf upright. -
Snap plastic clips into the pole grooves of the lower poles at your desired shelf height position. Slide down the shelf from top down onto the plastic clips.
-
Screw Upper Poles (C) into Lower poles by screw connectors which is already on the upper poles.
-
Repeat the step® to assemble the rest of wire shelves at the place V you desire.
-
Once all five wire shelves have been installed, pushing firmly down on every shelf at corners by rubber mallet to ensure the shelf in a place over the plastic clips.