ANYKIT AN150P 360 Degree Articulating Borescope Installation Guide
- June 5, 2024
- ANYKIT
Table of Contents
- READ BEFORE USE
- OVERVIEW
- SAFETY INSTRUCTION
- ABOUT ANYKIT
- KNOW YOUR PRODUCT
- SPECIFICATIONS
- PREPARATION & SETUP
- DISPLAY
- SETTINGS
- CHANGE THE TEMPERATURE UNITS
- LED BRIGHTNESS ADJUSTMENT
- ADJUSTABLE LENS FIELD OF VIEW
- SWITCH BETWEEN PHOTO & VIDEO RECORDING
- IMAGE PLAYBACK
- TF CARD INSERTION AND REMOVAL GUIDE
- COPY PHOTO AND VIDEO FILES TO COMPUTER
- MAINTENANCE
- TROUBLESHOOTING
- WARRANTY
- CUSTOMER SUPPORT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
360° Articulating Borescope
Model No.: AN150P
READ BEFORE USE
By using this product, you signify that you have read, understand, and accept
the terms and conditions here.
Read the following documents before using.
- Safety Guidelines
- Quick Start Guide
- User Manual
It is recommended to watch all tutorial videos on the official Anykit website
and read the safety guidelines before using.
Prepare for your first use by reviewing the quick start guide and refer to this
user manual for more information.
Video Tutorials
Scan the QR code to watch the AN150P tutorial videos, which demonstrates how
to use the AN150P safely.
ONLINE MANUAL
Scan this QR code to get the manual in PDF, which can be enlarged and viewed
on your mobile device.
OVERVIEW
Features
- 5-inch HD IPS Screen
- 360° Joystick Articulating Borescope
- 210° Image Rotation
- Adjustable LED lights
- Detachable Screen Design
Applications
- Inspect inside pipes to identify blockages, leaks, corrosion, and other issues.
- Examination of automotive engine internals, exhaust tubing, brake systems, etc…
- Inspection of internal components like engines, combustion chambers, ducts, etc…
- Assessment of equipment interiors for wear, corrosion, cracks, and similar conditions.
- Surveying concealed areas within buildings, such as internal walls and pipelines.
- Examination of ship hull interiors, compartments, drainage systems, etc…
SAFETY INSTRUCTION
WARNING! Please read all safety warnings and instructions before using this product. Failure to follow these warnings may result in electric shock, fire or serious injury.
- Keep the tool dry, clean, free from oil, water, gas or other materials that may cause corrosion.
- Keep your work area clean and well lit.
- This appliance is not intended for use by persons with limited physical, sensory or mental capabilities.
- This appliance is not intended for medical use or personal inspection.
- Keep bystanders, and children away while operating the tool.
- Do not overreach, keep proper footing and balance at all times.
ABOUT ANYKIT
Anykit is a trendy and practical tool brand. We focus on simplicity and ease
of use, providing people with convenience in their everyday lives.
Our products including otoscopes, endoscopes, and a variety of household tools
to enable DIY enthusiasts to embrace creativity and convenience.
KNOW YOUR PRODUCT
SPECIFICATIONS
Image Resolution | 1920*1080 |
---|---|
Video Resolution | 1280*720 |
DOF | 20-100mm |
FOV | 70° |
Manual dimming | Three adjustment levels |
Power supply | 3.7V |
Use time | About 4h |
Battery capacity | 3000mAh |
Camera light source | Adjustable LED |
Waterproof grade | IP67 |
Camera probe material | Wear resistant metal hose |
Camera probe length | 5ft (1m) |
High temperature
protection| High temperature intelligent protection
Articulation| 360 Degrees
Steering angle| ≤ 210°
Bending radius| 38mm
Storage| Standard 32GB-TF Card
Work environment
Operating
environment| Machine| -20℃~70℃
---|---|---
Input voltage| DC5V/1A
Humidity| 10~80%
PREPARATION & SETUP
Step 1 : Install the screen and handle, align them with the interface, and press firmly until you hear a click, indicating that they are connected.
Step 2 : Remove the plastic screen cover.
Step 3 : Turn the camera on/off by pressing and holding the “POWER” button for a few seconds.
Step 4: Low Battery Indicator: If the battery icon on the screen displays low battery, please ensure it is fully charged before use.
DISPLAY
SETTINGS
Press the button “ ” twice to enter the settings page.
Press “ ” and “ ” to select the items you need.
Press “ OK ” to save your choice.
|
---|---
| Automatic shut-down
| Language settings
| Date Time
| Temperature Unit
| Format
| Default Settings
| Version
CHANGE THE TEMPERATURE UNITS
-
Long Press the power button to power on, the monitor will light up and the blue power indicator will turn on.
-
Press the key twice.
-
Use the“ ”and “ ” to select whether to set Fahrenheit or Celsius, then press the“OK” to confirm the temperatureunit.
-
Then the temperature on the screen will be displayed in the unit you have selected.
LED BRIGHTNESS ADJUSTMENT
Press the “ ” briefly to adjust the brightness of the camera light.
The brightness cycles through bright, medium, dim, and light off.
ADJUSTABLE LENS FIELD OF VIEW
The articulation wheel allows for a 210” rotation, adjusting the lens field of view.
Tips: To achieve the max articulation angle, the cable should not be coiled in a circle.
Notice:When using the borescope, it is important to emphasize that the coil should not be wound up as this can affect the steering function and cause the articulation angle to become smaller.
SWITCH BETWEEN PHOTO & VIDEO RECORDING
Press “ ” to switch to the photo taking or video recording mode, and press “ ”( located at the back of the product)to take a photo or start recording.
IMAGE PLAYBACK
Press “ ” to switch to playback mode, press “ ” to select photo or video, press “ ” to play back the video.
TF CARD INSERTION AND REMOVAL GUIDE
The device is equipped with a TF memory card(inserted). Gently press to eject the card.
Insert TF card:
- Power off the device first before inserting the TF card.
- Make sure the direction and the front and back orientation is correct when inserting the TF card.
- Do not use excessive force when inserting or removing the TF card to prevent damage to the card slot structure.
COPY PHOTO AND VIDEO FILES TO COMPUTER
You can use a TF card reader to copy data directly or use a Type-c cable to connect to a computer for copying.
MAINTENANCE
Before cleaning your borescope, it’s important to power it off and disconnect
it to ensure it’s completely safe. To maintain optimal image quality,
delicately wipe the camera lens with a soft microfiber cloth and cotton swab
before andafter each use to remove dust and smudges.
When cleaning the screen, use a microfiber cloth and a mixture of warm water
and medical-grade alcohol to gently wipe off dust and fingerprints. Avoid using
abrasive cleansers, chemicals, or solvents as they can damage the device’s
exterior and interior components. Be careful not to let moisture infiltrate any
device openings or ports during the cleaning process, and ensure the device is
thoroughly dry before reconnecting to power or use.
When storing the device, power it down and keep it in a dry, cool, and well-
ventilated area. If your device features a coiled probe, gently coil it
without bending it too tightly. Avoid coiling it tighter than it was packaged
originally and shield it from direct sunlight, extreme temperatures, and humid
conditions. Keep it away from sharp objects and heavy items to prevent any
damage.
By following these detailed cleaning and maintenance instructions, you can
extend the lifespan of your industrial endoscope while maintaining top-notch
performance and image quality.
TROUBLESHOOTING
Problems | Solutions |
---|---|
No Camera | Unplug and reinsert the monitor, ensure the monitor and |
controller are well connected.
No Picture| Check probe and power. Restart the device.
Cannot Be Turned On| Insufficient power, charge it and try to turn it on.
Auto Shutdown| The probe will automatically shut down when it exceeds
the protection temperature, you can try to turn it on again after it cools
down.
TF Card Insertion Error| Insert compatible card. Format if needed.
Unable to Charge| Check cable and port. Try different
cable/adapter.
Blurry Picture| Clean lens/screen. Adjust focus if possible.
Blurry Screen Display| Adjust contrast and brightness for clearer
visuals.
Connection Interruption| Secure cable connection. Swap if needed.
Difficulty Operating| Study manual or video guides.
Abnormal Screen Colors| Check cable. Contact support if issue persists.
Screen Flickering or Lines| Check power. Restart.
Device Heating Up| Ensure ventilation. Avoid high temps.
Difficulty Starting the Device| Check battery. Hold power
button.
Image Inversion or Reversal| Adjust image settings in menu.
Slow Screen Response| Restart device. Manage memory usage.
Difficulties Bending the Probe| Coil probe gently. Stop if
resistance.
*If you encounter any issues while using the product, don’t hesitate to reach out to us. We’ll provide feedback within 24 hours and work swiftly to resolve the matter.
WARRANTY
30-Day Guarantee| We will give you a full refund if you are not satisfied with
the product.
---|---
One-Year Warranty| We offer a limited warranty that commences from the date of
purchase of the product.
Visit anykit.com or scan the QR code for more details.
CUSTOMER SUPPORT
If you have any questions or concerns about your product, please contact our Customer Support Team
| 1-877-888-7979
Mon.-Fri. 8:00-5:00 PST(US)
---|---
| support@anykit.com
| www.anykit.com
| @anykit
| @anykit
| Facebook Messenger