ANYKIT AN600 Digital Inspection Borescope User Manual

ANYKIT AN600 Digital Inspection Borescope

READ BEFORE USE

By using this product, you signify that you have read, understand, and accept the terms and conditions here.
Read the following documents before using.

1. Safety Guidelines
2. Quick Start Guide
3. User Manual
   It is recommended to watch all tutorial videos on the official Anykit website and read the safety guidelines before using.
   Prepare for your first use by reviewing the quick start guide and refer to this user manual for more information.

Video Tutorials
Scan the QR code to watch the AN600 tutorial videos, which demonstrates how to use the AN600 safely.

ONLINE MANUAL
Scan this QR code to get the manual in PDF, which can be enlarged and viewed on your mobile device.

OVERVIEW

Features

• 6.0 inch IPS Screen
• WiFi Transmission
• Adjustable LED lights
• 6000mAh Rechargeable Battery

Applications

• Automotive or diesel repair and maintenance
• Inspection of hard-to-reach or hard-to-see areas or equipment, plumbing, construction & restoration applications
• Scientific education
• Outdoor exploration

SAFETY INSTRUCTION

WARNING! Please read all safety warnings and instructions before using this product. Failure to follow these warnings may result in electric shock, fire or serious injury.

• Keep the tool dry, clean, free from oil, water, gas or other materials that may cause corrosion.
• Keep your work area clean and well lit.
• This appliance is not intended for use by persons with limited physical, sensory or mental capabilities.
• This appliance is not intended for medical use or personal inspection.
• Keep bystanders, and children away while operating the tool.
• Do not overreach, keep proper footing and balance at all times.

ABOUT ANYKIT

Anykit is a trendy and practical tool brand. We focus on simplicity and ease of use, providing people with convenience in their everyday lives. Our products including otoscopes, endoscopes, and a variety of household tools to enable DIY enthusiasts to embrace creativity and convenience.

KNOW YOUR PRODUCT

APECIFICATIONS

Screen

• Screen: 6-inch IPS Display
• Photo resolution(Pixels): 1920×1080/1280×720
• Video Recording resolution(Pixels): 1920×1080/1280×720
• Port: Type-C charging port; TF memory card slot

Camera

Application Environment

PREPARATION & SETUP

• Step 1: Remove the plastic screen cover.
• Step 2: Align the groove on the aviation head with the red dot on the main unit interface, press to connect, and then rotate to lock it securely.

• Step 3: Switch the Camera On/Off (press and hold the POWER button for a few seconds).
• Step 4: Low Battery Indicator (If the battery icon on the screen shows low battery, please charge it fully before using it).

USEFUL ACCESSORIES

HOW TO ATTACH ACCESSORIES

Unscrew the thread protector, then screw on the accessory.

DISPLAY

LANGUAGE SETTINGS

• The default language is English, and the system supports English, Chinese, German, French, Spanish, Italian, Russian, and Japanese. Setting path:
• Press the button twice to enter settings page
• Select second item ( Language ) on settings page
• Press up and down keys to select the language you need
• Press to save your choice.

SWITCH BETWEEN PHOTO & VIDEO RECORDING

• Press to switch to the photo taking or video recording mode, and press to take a photo or start recording.

• Press to switch to playback mode, press to select photo or video to view, and press to delete photo or video.

IMAGE ADJUSTMENT

NOTICES

• Notice: When connecting a dual lens camera probe, please hold press this button to switch the front and side lenses.

• Note: Connect camera probe before turning on device. Restart device after replacing camera probe.

WIFI CONNECTION

How to display the image on your Phone/Pad/Tablet

Preparing for the Connection

• Step 1 : Download the “Smart Endoscope” app.

• Step 2: Enter the activation code from the card included in the package to remove ads from the app.

Connecting to WiFi

• Step 1 : Open the WiFi settings on the endoscope, and connect your mobile device to the endoscope’s Wi Fi network.

• Step 2: Go back to the “Smart Endoscope” app and select the AN600 model.

Start using the screen mirroring feature and view the inspection footage on your mobile device.

WARNING

• After successfully connecting to the WiFi of the borescope, you may see a prompt saying “no internet connection” when trying to access the internet. This message does not indicate a failed connection; rather, it means that the WiFi provided by the borescope is limited to transmitting images and videos from the borescope and does not provide internet access.
• A If you encounter an issue where the app cannot connect, please check your phone’s version. Upgrading your phone’s version may cause compatibility issues. Please get in touch with our customer service email support@anykit.com to confirm if the app has an update available. If so, please uninstall the app and install the latest version.
• A Please note Photo Taking/Video Record only supported by your Phone/Pad/Tablet(not available for the borescope device) when you are in the WiFi mode.

TF CARD INSERTION AND REMOVAL GUIDE

The device is equipped with a TF memory card (inserted). Gently press to eject the card.

Insert TF card:

• Power off the device first before you insert the TF card.
• Make sure the direction and the front and back orientation is correct# when you insert the TF card.
• Do not use excessive force when inserting or removing the TF card to prevent damages of card slot structure.

COPY PHOTO AND VIDEO FILES TO COMPUTER

You can use a TF card reader to copy data directly or use a Type-C cable to connect to a computer for copying.

MAINTENANCE

Cleaning Tips

• Turn off and unplug the device before cleaning.
• Clean the camera lens before and after each use with a soft microfiber cloth and a cotton swab to get the best image quality from your inspection camera.
• For stubborn stains, use warm water or rubbing alcohol. DO NOT use stronger solvents.
• Clean dust and fingerprints off the monitor using# a microfiber cloth and warm water or rubbing alcohol.
• Never use abrasive cleaners, chemicals, or solvents as they can damage the device’s surface or internal components.
• Avoid getting moisture in any openings or ports of the device.
• Allow the device to fully dry before plugging it in or using it.

Storage

• Make sure the power is turned off before storage.
• When not used, please store the product properly in a dry, cool, well-ventilated area.
• When coiling a flexible Anykit camera probe, DO NOT bend the probe into too tight of a radius. Coil the probe gently. If you experience any resistance, then the probe is coiled too tightly. A good rule of thumb is to not coil it any tighter than it was sent in its original packaging.
• Keep the device out of direct sunlight, extreme temperatures, and humid environments.
• Store the device away from sharp objects, heavy items, or anything that could cause damage to it.
• Avoid storing the device near magnets or devices that generate strong magnetic fields.
• If storing the device for an extended period, ensure it is fully charged and turned off completely.

TROUBLESHOOTING

it on
Auto shutdown| The probe will automatically shut down when it exceeds the protection temperature, you can try to turn it on again after it cools down
TF card insertion error| No TF card is displayed on power on, eject and reinsert the TF card

Unable to charge

| Try charging with a different cable or power adapter

Blurry picture

| Adjust the distance between the lens and the subject, if the lens is dirty, please clean with water

Lens light does not illuminate

|

Press the light control button to cycle the lens brightness.

*If you have any problems with the product , you can contact us and we will give you feedback within 24 hours and solve the problem as soon as possible.

WARRANTY

• 30-DAYS GUARANTEE
  We will give you a full refund if you are not satisfied with the product.

• ONE YEAR GUARANTEE
  We offer a limited warranty that commences from the date of purchase of the product.

CUSTOMER SUPPORT

If you have any questions or concerns about your product, please contact our Customer Support Team

• 1-877-888-7979
• Mon.-Fri. 8:00-5:00 PST(US)
• support@anykit.com
• www.anykit.com
• @anykit
• @anykit

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>