TRIPP LITE N820X-07M-OM4 400G Multimode 50/125 OM4 Switchable Fiber Optic Cable Owner’s Manual
- June 9, 2024
- Tripp Lite
Table of Contents
TRIPP LITE N820X-07M-OM4 400G Multimode 50/125 OM4 Switchable Fiber Optic
Cable
Product Information
The N820X-07M-OM4 is a 400G Multimode 50/125 OM4 Switchable Fiber Optic Cable with a Duplex LC-PC M/M connector. It has a LSZH (low-smoke zero-halogen) aqua-colored jacket, and is 7 meters (23ft.) long. This cable is designed to support high bandwidths required for next-generation cloud services, hyperscale data centers, and telecom carriers.
Features
- OM4-rated cable recommended for 400 Gb speeds up to 100 meters (@ 850 nm)
- Switchable connector ends allow polarity conversion without tools or re-termination
- Allows use of stacked LC adapters to increase population density
- Backward compatible with 40/100 Gb networks to facilitate future-proofing
- Aqua LSZH jacket allows fast, easy identification in a crowded switch or patch panel
Specifications
- Cable Jacket Col or: Aqua
- Connector Color: Aqua
- Cable Jacket Material: LSZH
- Cable Jacket Rating: OFNR
- Cable Outer Diameter (OD): 2mm x 4.1mm
- Clad Diameter (microns): 125.0
- Core Diameter (microns): 50.0
- Primary Coating Diameter (microns): 600.0
- Number of Fibers : 2
- Cable Length (ft.): 7.00
- Cable Length (m): 7.00
- Cable Length (in.): 196.9
- Minimum Bend Radius: 20MM (DYNAMIC); 10MM (STATIC)
- Operating Temperature Range: -4 TO 140 F (-20 TO 60 C)
- Storage Temperature Range: -4 TO 140 F (-20 TO 60 C)
- Operating Humidity Range: 5% TO 85% RH, NON-CONDENSING
- Storage Humidity Range: 5% TO 85% RH, NON-CONDENSING
- Network Compatibility: 10 Gbps; 25 Gbps; 40 Gbps; 100 Gbps; 400 Gbps
- Wavelength: 1300nm; 850nm
- Attenuation @ 850NM: 3.5dB/KM
- Attenuation @ 1300NM: 1.5dB/KM
- Insertion Loss : LESS THAN OR EQUAL TO 0.20dB
- Side A – Connector 1: LC DUPLEX (MALE)
- Side B – Connector 1: LC DUPLEX (MALE)
- Endface Polish: PC
- Push/Pull Tabs: No
- Optical Port: LC
- Breakout: No
- Trunk: No
- Certifications: RoHS, REACH, CE, UL1666
- Product Warranty Period (Worldwide): Lifetime limited warranty
Product Usage Instructions
The N820X-07M-OM4 cable is designed for use in high-bandwidth environments such as cloud services, data centers, and telecom carriers. Follow the instructions below to properly use the product:
- Identify the equipment and patch panel that will be connected by the cable. Make sure that they are compatible with the cable’s network compatibility and wavelength.
- Connect one end of the cable to the Side A – Connector 1 equipment.
- Connect the other end of the cable to the Side B – Connector 1 equipment.
- If polarity conversion is required, use the switchable connector ends to convert polarity without tools or re-termination.
- If stacked LC adapters are needed to increase population density, they can be used with this cable.
- The aqua-colored LSZH jacket allows for easy identification of the cable in a crowded switch or patch panel.
- The cable has a minimum bend radius of 20mm (dynamic) or 10mm (static). Do not bend the cable beyond these limits.
- Ensure that the operating temperature range of -4 TO 140 F (-20 TO 60 C) and operating humidity range of 5% TO 85% RH, NON-CONDENSING are not exceeded.
Following these instructions will ensure that the N820X-07M-OM4 cable is used properly and effectively in your high-bandwidth environment.
MODEL NUMBER: N820X-07M-OM4
400 GbE Ethernet cable supports high bandwidths necessary for next-generation cloud services, hyperscale data centers and telecom carriers.
Highlights
- OM4-rated cable recommended for 400 Gb speeds up to 100 meters (@ 850 nm)
- Switchable connector ends allow polarity conversion without tools or re-termination
- Allows use of stacked LC adapters to increase population density
- Backward compatible with 40/100 Gb networks to facilitate future-proofing
- Aqua LSZH jacket allows fast, easy identification in a crowded switch or patch panel
Package Includes
N820X-07M-OM4 400G Multimode 50/125 OM4 Switchable Fiber Optic Cable, Aqua, 7
m (23 ft.)
Features
400 GbE Cable Supports Higher Bandwidths Needed for Next-Generation Data Networking As the amount of traffic in data networks grows, so does the need for next-gen devices and fiber cables to support higher bandwidths in cloud services, hyperscale data centers, telecom applications and equipment OEM companies. This multimode 50/125 OM4 cable is an ideal choice for 400G Ethernet applications up to 100 meters (328 feet) at 850 nm. It is also backward compatible with 40 Gb and 100 Gb networks, so you can future-proof your current application for an eventual upgrade to 400 Gb.
Switchable LC Connectors Allow Easy Polarity Conversions
The switchable LC duplex connectors on both ends of the cable let you easily
switch the fiber polarity without tools or the need to re-terminate the
connectors. This can allow for stacked LC adapters, eliminating the need for
dual zip cords and reducing overall bulk cabling in high-density situations.
Just remove the clipped piece holding the connector ends together on each
side, identify the send and receive ends, and switch the polarity of those
ends based on your application needs.
Aqua-Colored Jacket Helps Avoid Misidentification That Can Cause Costly
Downtime
The OM4-rated cable has an aqua jacket to identify it as multimode in a
crowded patch panel or switch and prevent it from becoming accidentally
disconnected. The round low-smoke zero-halogen (LSZH) jacket limits the amount
of toxic smoke emitted in case of combustion, making it suitable for poorly
ventilated areas.
Specifications
OVERVIEW
UPC Code| 037332272836
Technology| Multimode
Optical Mode| OM4
---|---
Mode Type| Multimode
PHYSICAL
Cable Jacket Color| Aqua
Connector Color| Aqua
Cable Jacket Material| LSZH
Cable Jacket Rating| OFNR
Cable Outer Diameter (OD)| 2mm x 4.1mm
Clad Diameter (microns)| 125.0
Core Diameter (microns)| 50.0
Primary Coating Diameter (microns)| 600.0
Number of Fibers| 2
Cable Length (ft.)| 22.97
Cable Length (m)| 7.00
Cable Length (in.)| 196.9
Minimum Bend Radius| 20MM (DYNAMIC); 10MM (STATIC)
ENVIRONMENTAL
Operating Temperature Range| -4 TO 140 F (-20 TO 60 C)
Storage Temperature Range| -4 TO 140 F (-20 TO 60 C)
Operating Humidity Range| 5% TO 85% RH, NON-CONDENSING
Storage Humidity Range| 5% TO 85% RH, NON-CONDENSING
COMMUNICATIONS
Network Compatibility| 10 Gbps; 25 Gbps; 40 Gbps; 100 Gbps; 400 Gbps
Wavelength| 1300nm; 850nm
Attenuation @ 850NM| 3.5dB/KM
Attenuation @ 1300NM| 1.5dB/KM
Insertion Loss| LESS THAN OR EQUAL TO 0.20dB
CONNECTIONS
Side A – Connector 1| LC DUPLEX (MALE)
Side B – Connector 1| LC DUPLEX (MALE)
Endface Polish| PC
FEATURES & SPECIFICATIONS
Push/Pull Tabs| No
---|---
Optical Port| LC
Breakout| No
Trunk| No
STANDARDS & COMPLIANCE
Certifications| RoHS, REACH, CE, UL1666
WARRANTY
Product Warranty Period (Worldwide)| ****
Lifetime limited warranty
© 2021 Tripp Lite. All rights reserved. All product and company names are
trademarks or registered trademarks of their respective holders. Use of them
does not imply any affiliation with or endorsement by them. Tripp Lite has a
policy of continuous improvement. Specifications are subject to change without
notice. Tripp Lite uses primary and third-party agencies to test its products
for compliance with standards. See a list of Tripp Lite’s testing agencies:
https://www.tripplite.com/products/product-certification-agencies
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>