SC T SDI01-12G 12G-SDI to 4K HDMI Converter User Manual
- June 9, 2024
- SC T
Table of Contents
SC T SDI01-12G 12G-SDI to 4K HDMI Converter
Introduction
SDI01-12G is a 12G-SDI to HDMI 2.0 converter that can allows you to monitor 12G SDI video using a cost-effective HDMI display. The new converter has a built-in SDI loop-out port to send the input SDI signal to an extra SDI device.
Features
- HDMI Resolution up to 4096×2160@60Hz 4:4:4 10Bit or 4096×2160@30Hz 4:4:4 12Bit.
- SDI Resolution up to 12G.
- Built-in fiber module for long distance transmission.
- Built-in SDI loop out for an extra SDI output.
- Supports video up/down scaler for HDMI output.
- Managed via PC software or DIP switch.
Diagram 
Transmission Distance
- The experiment is conducted by the application of Belden 1694A coaxial cables.
Cable| Data Rate| Distance
---|---|---
RG6U Coaxial| 11.88Gb/s| 80M
RG6U Coaxial| 5.94Gb/s| 100M
RG6U Coaxial| 2.97Gb/s| 190M
RG6U Coaxial| 1.485Gb/s| 260M
RG6U Coaxial| 270mB/s| 450M
12G Video SFP+| 11.88Gb/s| 10KM
Panel View
| NO | Interface | Function |
|---|---|---|
| 1 | HDMI Out | To connect an HDMI device |
| 2 | Coaxial In | To connect a SDI source via a coaxial cable |
| 3 | Coaxial Out | To connect a SDI device via a coaxial cable |
| 4 | Optical In | To connect a SDI source via a fiber cable |
| 5 | Optical Out | To connect a SDI device via a fiber cable |
| 6 | FW Update | To update firmware |
| 7 | Console | To update firmware update or configure the system. |
| 8 | Power | To turn on/ off power |
| 9 | DC12V | To connect a DC 12V power adapter |
| NO | Interface | Function |
|---|---|---|
| 10 | Setting | To configure input interface, resolutions, HDCP, modes. |
LED Indication
| Front LED Indicator | LED Color | Bright | Blink |
|---|---|---|---|
| On | Green On/Off | Power On/ Off | |
| SDI | Green On/Off | Signal Locked | |
| HDMI | Green On/Off | HDMI Outputted | Resolution not supported |
| 12G/6G | Blue On/Off | 12G-SDI | 6G-SDI |
| 3G/1.5G | Blue On/Off | 3G-SDI | 1.5G-SDI |
| 270M | Blue On/Off | 270M-SDI | |
| Rear LED Indicator | Rear Panel LED | Function | |
| --- | --- | --- | |
| READY | Green On/Off | System Ready | |
| Coaxial | Blue On/Off | Coaxial linked/ unlinked | |
| Optical | Blue On/Off | Optical linked/ unlinked |
DIP Switch Settings
- Please adjust the DIP switch when power off and turn on to take effect.
NO| Function| ↑ OFF| ↓ ON
---|---|---|---
1| Input Interface Select| Coaxial| Optical
2| Reserve| |
3| Reserve| |
4| Reserve| |
5| Scaler Setting| 6↑5↑ = Pass-through| 6↑5↓ = 1080p@60Hz
6| 6↓5↑ = 3840×2160@60Hz| 6↓5↓ = 4096x2160p@60Hz)
7| HDCP Setting| HDCP Off| HDCP On
8| Configuration Mode| Software Mode| Hardware Mode
SDI Resolution and Frame Rate
| SDI Resolution | SDI Frame Rate | SDI Sampling | SDI Audio |
|---|---|---|---|
| 4096×2160 | 60p, 59.94p, 50p, 48p, 47.95p, 30p, 29.97p, 25p, 24p, 23.98p | ||
| 4:4:4/4:2:2 | 32-CH 48KHz 24-Bit | ||
| 3840×2160 | 60p, 59.94p, 50p, 48p, 47.95p, 30p, 29.97p, 25p, 24p, 23.98p | ||
| 2048×1080 | 60p, 60i, 59.94p, 59.94i, 50p, 50i, 48p, 48i, 47.95p, 47.95i, 30p, |
30psf, 29.97p, 29.97psf, 25p, 25psf, 24p, 24psf, 23.98p, 23.98psf
1920×1080| 60p, 60i, 59.94p, 59.94i, 50p, 50i, 48p, 48i, 47.95p, 47.95i, 30p,
30psf, 29.97p, 29.97psf, 25p, 25psf, 24p, 24psf, 23.98p, 23.98psf
1280×720| 60p, 59.94p, 50p, 48p, 47.95p, 30p, 29.97p, 25p, 24p, 23.98p
HDMI Resolution and Frame Rate
HDMI Resolution| HDMI Frame Rate| HDMI Sampling| HDMI
Audio
---|---|---|---
4096×2160| 60p, 59.94p, 50p, 48p, 47.95p, 30p, 29.97p, 25p, 24p, 23.98p|
4:4:4/4:2:2| 8-CH 48KHz 24-Bit
3840×2160| 60p, 59.94p, 50p, 48p, 47.95p, 30p, 29.97p, 25p, 24p, 23.98p
2048×1080| 60p, 60i, 59.94p, 59.94i, 50p, 50i, 48p, 48i, 47.95p, 47.95i, 30p,
29.97p, 25p, 24p, 23.98p
1920×1080| 60p, 60i, 59.94p, 59.94i, 50p, 50i, 48p, 48i, 47.95p, 47.95i, 30p,
29.97p, 25p, 24p, 23.98p
1280×720| 60p, 59.94p, 50p, 48p, 47.95p, 30p, 29.97p, 25p, 24p, 23.98p
Scaler Resolution and Frame Rate
- The scaler doesn’t process the format of interlace and progressive segmented frame, it will directly pass-through original format from the input source.
HDMI Resolutions| HDMI Frame Rates
---|---
4096×2160| 59.94/ 60/ 50Hz
3840×2160| 59.94/ 60/ 50Hz
1920×1080| 59.94/ 60/ 50Hz
1280×720| 59.94/ 60/ 50Hz
720x576p| 50Hz
640x480p| 59.94/ 60Hz
Trouble Shooting
- We strongly recommend using high quality 75Ω coaxial cables; bad quality cable may affect the connection stability and transmission distance.
- SD-SDI (480i & 576i) in the SMPTE 292 standard 270M is not supported.
- If the frame rate for video input sets as 59.94Hz and the scaler selects 60Hz, the output frame rate will stay on 59.94Hz.
Package Includes
| No. | Item | Amount |
|---|---|---|
| 1 | SDI01-12G | x 1 |
| 2 | DC12V 1.5A Power Adapter | x 1 |
| 3 | Screw Set | x 1 |
| 4 | Rubber Pad | x 1 |
Specification
| ITEM NO. | SDI01-12G |
|---|
Support
Compliance| SMPTE 2082-10 Mode 1
SMPTE 2081-10 Mode 2 SMPTE 425-1 3GA & 3GB SMPTE 425-1 3GB-DS
SMPTE 292
HDMI 2.0
HDCP 2.2
SDI Resolution| 12G-SDI, 6G-SDI, 3G-SDI, 1.5G-SDI
HDMI Resolution| 4096×2160@60Hz 4:2:2 10Bit, 4096×2160@30Hz 4:4:4 12Bit
Transmission Distance| 10KM over Single-mode Fiber Optic Cable, 100M over
Coaxial Cable
Ports & Interfaces
Video Input| 1 x 75Ω BNC, 1 x Video SMPTE SFP+
Video Output| 1 x HDMI Type A
Video Loop-out| 1 x 75Ω BNC, 1 x Video SMPTE SFP+
Power Interface| 1 x (5.5 x 2.1mm) DC Jack
Console| 1 x Micro USB
Power
Power Supply| DC 12V 1.5A Regulated
Power Consumption| 1.0A (Typical), 1.2A (Maximum)
Ambient Temperature
Operation| 0 to 50℃
Storage| -20 to 85℃
Humidity| Up to 95%
Physical Characteristics
Dimensions| 167 x 154 x 40mm
Weight| 640g
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>