alza 600W Series DC to AC Power Inverter User Manual

: June 9, 2024
: alza

Table of Contents

alza 600W Series DC to AC Power Inverter
Introduction
Product and Wiring Diagram
Security Matters
Protection Function
Specification
Warranty Conditions
EU Declaration of Conformity
WEEE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

alza 600W Series DC to AC Power Inverter

The product user guide contains product features, how to use, and the operating procedure. Read the user manual carefully to get the best experience and avoid unnecessary damage. Keep this manual for future reference. If you have any questions or comments about the device, please contact the customer line.
✉ www.alza.co.uk/kontakt ✆ +44 (0)203 514 4411 Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Introduction

Power inverter is a kind of product which changes the DC electricity to AC electricity for powering small electrical equipment. It has been widely used in cars, steamboats, mobile offices, posts, telecommunications, public security, emergency and so on. This power inverter adopted the international lead circuit design with the advantage of small size, light weight, stability and high conversion efficiency. It has five protection functions, such as low input voltage protection, high input voltage protection, overload protection, overheat protection and output short circuit protection. These five functions can protect the electrical equipment and the circuit of the car. Please read this manual carefully before using. It is applicable to 200W, 300W, 400W and 600W series of products.

Product and Wiring Diagram

alza-600W-Series-DC-to-AC-Power-Inverter-FIG-1

Fan
DC input (+) (red)
DC input (-) (black)
Power light (green light)
Fault light (red light)
AC output socket
ON/OFF switch
USB port ×2 (if any)
Baffle

alza-600W-Series-DC-to-AC-Power-Inverter-FIG-2

Using the Product

Connecting in the wrong way will destroy the power inverter as well as the electrical equipment, please follow the following steps and sequences and make sure to use the product in the right way. When using in the car, please connect the inverter with the DC cigar lighter port.

Connect the red side of the cigar lighter with the (+) terminal and fix it, the black side connects with the (-) terminal and fix it. Do not mix them or it will destroy the inverter.
Insert the cigar lighter to the DC port of the car, turn on the power inverter, the green LED turns on.
Insert the plug of the electric equipment into the AC socket of the inverter.
Note: When using the power inverter in the car, please do not let power exceed 150W, or else it will destroy the wiring of the car and it will be dangerous.

When using outside of the car or exceeds 200W

When using outside of the car or power exceeds 200W, please, use a battery clip cable to connect the battery.
The battery clip cable has red and black cables. Connect the red cable with (+) and fix it, connect the black cable with (-) and fix it.
The clip on the red cable connects with the (+) terminal of the battery and the clip on the black connects with the (-) terminal. Do not mix them or it will destroy the power inverter.
Turn on the power inverter, the green LED turns on. Insert the plug of the electric equipment into the AC socket of the inverter.

Electrical equipment can be used

Office equipment (computer, scan, printer, projector, light)
Digital products (mobile phones, cameras, PDA)
Small house electrical equipment (TV, fan, water dispenser, dust collector)
Hardware appliance (portable electric drill, waxing machine)

Electrical appliances that are inapplicable

All electric appliances that exceed the rated power of the inverter.
Generally, capacitive load and perceptual load appliances are inapplicable (air conditioner, high power electric drill, fridge, microwave oven, blender).
We do not recommend using this inverter with appliances which have strict requirement on the power supply, such as precise equipment.

Electrical appliances that are inapplicable with the USB (only for inverters with USB port)

USB is only for charging; it does not have a data exchange function.
Before charging, please check carefully if the charging current of the appliance is under the inverters current. If it exceeds the charging current of the inverter, please do not use the appliance as it may damage the USB port.
Some appliances must be charged with the original charger. Please, do not charge with the USB port.

Please use this inverter in well-ventilated conditions and make sure that the fan is not blocked. Do not put the inverter under rain or in humid places. Keep it dry. To keep a long lifespan of the inverter, please keep it working under 85% of the related power.The inverter has an input low voltage protection function, over-voltage input protection function, overload protection function, overheat protection function, and short circuit protection function. If one of these incidents happens, the inverter will stop, automatically restarts, and starts working again. To save energy, the fan will not be working unless one of these situations occurs:

The load exceeds 30% of the related power of the inverter.
The inside temperature of the inverter exceeds 60 °C.

We do not recommend using an extension power cord between the inverter and the battery because it will cause a loss of DC electricity and affects the performance of the inverter. If you must use the extension power cord, we suggest you use a high-quality cable to reduce the loss of electricity.

Other matters

This is a modified sine wave inverter. When measuring the voltage, please use precise equipment. (RMS)
When supplying power to an audio system, radio or TV, this appliance may interfere. That is a normal phenomenon.
When using in a car, please stop using the inverter while the engine is stopped.
Please do not disassemble the inverter. If it needs maintenance, please ask a professional to mend it.

Security Matters

Please, do not operate the inverter while your hands are wet. Keep it away from the touch of children.
The temperature of the shell will be high after a long time of working. Do not touch it to prevent scalding.
Do not put metal into the inverter to prevent electric shock.
Do not touch the metal of the socket while inserting the plug into the socket of the inverter.
Keep the inverter away from explosives.
Keep all AC electricity away from the inverter. It will damage the inverter and also may cause electric shock.

Protection Function

alza-600W-Series-DC-to-AC-Power-Inverter-FIG-3

PS: If the USB port is present, the USB port can work normally under any kind of protection condition.

Specification

alza-600W-Series-DC-to-AC-Power-Inverter-FIG-4

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7 IČO: 27082440

Subject of the declaration

Title: BYGD Power Inverter
Model / Type: P300U, P600U, P1000U, P1500U

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

Directive No. (EU) 2014/35/EU
Directive No. (EU) 2014/30/EU
Directive No. (EU) 2011/65/EU as amended 2015/863/EU
Prague, 27.1.202

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.