CYCMOTOR APT 750c BLE Electric Bike Display User Guide
- June 9, 2024
- CYCMOTOR
Table of Contents
CYCMOTOR APT 750c BLE Electric Bike Display
Product Details
Electrical Parameters
- 3.2 inch IPS screen
- 36V / 48V / 52V / 72V battery supply
- Rated operating current: 40mA
- OFF leakage current < 1uA
- Max output current to controller: 100mA
- Operating temperature: -20 – 70 °C
- Storage temperature: -30 – 80 °C
Dimensions & Materials
Materials
- Product shell – ABS plastic
- Transparent window – High strength Acrylic
Dimensions
- L 110mm x W 68.2mm x H 68mm
Features
- Suitable for low temperature: Max -20 °C
- High-contrast 3.2 inch IPS colourful matrix screen.
- Ergonomic external button design, easy to operate.
- Speed display: AVG SPEED, MAX SPEED, SPEED (Real-time)
- Kilometre / Mile: Can be set according to user’s preference.
- Smart battery indicator: Provide a reliable battery indication.
- 9-level Assist: 3-level / 4-level / 9-level optional.
- Mileage indicator: Odometer / Trip distance / Clock / Riding time.
- Power indicator: Real time power indication; digital or analog.
- Error code indicator.
Main Functionalities
Power On/ Off
Press and hold the POWER button for 1 second to turn the display on/ off. The
display will automatically shut down when there is no operation for a period
of time.
Mode Switch
Double press the POWER button to change between RACE Mode & STREET Mode. Note
that this will not change the mode in real-time but rather set the start-up
mode (Street Mode recommended). Change the mode in real-time via mobile app.
Assist Level Operating
Short press the UP/DOWN button to change the assist level. The top assist level is 9 where 0 is neutral. The amount of assist levels can be adjusted according to the user’s preference.
Speed Display Switch
-
Short press MENU button to change the speed mode: Speed -> AVG Speed -> MAX Speed.
-
RT = Real time speed
-
AVG = Average speed
-
MAX = Maximum speed
-
If there is no operation for 5 seconds, the display will return to real-time speed automatically.
Mileage Display Switch
Short press the POWER button to change the mileage mode: Trip -> ODO -> Time => Range.
Parameter Settings
Button Navigation
Double press the MENU button to get into the settings menu. The press interval
must be less than 0.3 seconds. Press the POWER button to change between the
Display Settings & Basic Settings.
Press the UP/DOWN buttons to change between the parameters, MENU button to select, & UP/DOWN to change the selected parameter. Press the MENU button to deselect parameters & to set changes made.
- The display will automatically quit the settings menu when there is no operation for 30 seconds.
- For safety reasons, the display cannot get into the settings menu when riding.
- The display will quit the settings menu when the user starts riding.
Display Settings
System
Press the UP/DOWN button to change between Metric & Imperial.
Brightness
Press the UP/ DOWN button to change the brightness of the display’s backlight.
“I” is the darkest & “IIIII” is the brightest.
Auto off
Press the UP/DOWN button to change the auto power off time. This can be set
between 1 to 9 minutes or off.
Battery Ind
Press the UP/DOWN button to change your battery indication. This can be set to
Voltage, Capacity, Percentage, or off.
Self – Testing
Please ignore! This setting is for CYC Motor Ltd use only. DO NOT attempt to
change these settings as you risk corrupting display settings.
Clock
Press the MENU button get into the clock setting menu. Then, press the UP/DOWN
button to set Year/ Month/ Day/ Hour/ Min/ Sec.
Basic Settings
Wheel
Press the UP/DOWN button to change the wheel settings. The optional wheel
diameter is 16 to 29 inch.
Battery
Press the UP/DOWN button to change battery voltage settings. The optional
battery voltages are 36V to 72V. Kindly note that some older 750c displays
might not have the 36V setting.
Start password
Press the MENU button to get into the password setting menu. Start input ON
will switch on password upon start-up. You need to input the right password
before start within 30 seconds. The display will power off automatically if
the password is entered incorrectly three times.
Advance setting
Press the MENU button to get into the advance settings menu. You will need to
enter your Start Input Password. The default password is 1919. There is only 1
parameter which needs to be set as all others should be neglected and will not
affect your system: Assist levels.
Go to the NEXT PAGE on the display. Here, you can choose the number of assist levels (or gears) accordingly. The available options are 3, 5, or 9 assist levels.
The power output will be distributed evenly across the chosen number of assist
levels (or gears) according to the Assist Level Configuration and Speed Limit
Assist settings on your CYC Motor (BAC) mobile app:
Note that the App Assist Level shown below can be customized in the app.
Factory setting
Press the MENU button to enter the factory settings menu. Selecting YES will
restore all parameters on the display to factory settings. Note that this will
not affect your app settings.
Information
Press the MENU button to show information of the eBike, including the average
and maximum speeds, the current trip distance, ODO, and range.
Press the MENU button to select Product Infor. This menu will show you the display’s information including its hardware and software versions as well as the display’s serial number.
Press the MENU button to select Battery Infor. This menu will show you all the battery information provided that the information is supported by the battery communication system.
Error Codes
In certain circumstances, an error code may appear on your display. Refer to
the CYC Motor (BAC) mobile application user guide for instructions on how to
clear the errors and for further details on what these errors entail. Contact
[email protected] for
assistance.
Assembly Information
Note the torque requirements described above as excessive torque can cause damage.
Compatibility
The clamps are suitable for 3x different handlebar sizes: 31.8mm, 25.4mm, and
22.2mm. There are transfer rings included for 25.4mm and 22.2mm (marked with L
or R) as shown below. Be sure to pay attention to the directions below to
insert the transfer rings correctly.
Pin Layout
- Red wire: Anode (36V to 72V)
- Black wire: GND
- Yellow wire: TxD (display -> controller)
- Green wire: RxD (controller -> display)
- Blue wire: Power cord to the controller
Certification
CE / IP65 (waterproof) / ROHS.
Quick Start guide
After unboxing and installing your X1 Pro or X1 Stealth, there are a few
things you need to set up and check.
STEP 1: Ensure that all wires are properly connected and that your system
can switch on by pressing the display’s power button. Check that the display
shows your battery voltage and level. Should your display briefy show error
30H upon start-up, this is normal as the system takes a moment to connect.
Should your battery voltage and level not display refer to step 3.
STEP 2: Ensure that your pedal assist and throttle are working correctly.
To test this, connect to the CYC Motor (BAC) mobile app and change to Assist
Level 0 on your display. You can test the PAS by looking at the app’s
dashboard and turning the crank set. If your Average Pedal RPM reading
changes, then your PAS is working. To test the throttle, open your throttle
and check that your Throttle In voltage changes. Ensure that you test the PAS
and throttle in Assist Level 0 as to not make the bike thrust forward. STEP
3: Set up the correct information on your display. You will need to enter
your wheel diameter, battery voltage (if incorrect), & your preferred number
of assist levels.
Be sure to contact
[email protected] if
further assistance is needed. Thank you!
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology Intelligent Technology Co., Ltd.(otherwise known as Topology). All the information contained in this manual is published in good faith and for general information purpose only. Contact [email protected] for further assistance.