CYCMOTOR TOPOLOGY SW102 Mini Size 1.3 Inch OLED Display User Guide
- June 9, 2024
- CYCMOTOR
Table of Contents
CYCMOTOR TOPOLOGY SW102 Mini Size 1.3 Inch OLED Display User Guide
[email protected]
+852 3690 8938
01 Product Details
Product Details
Product Name
Intelligent OLED display, model : SW102
Firmware: CYC Motor Ltd specific firmware
Features
- Minimalist design and process
- High brightness, high contrast 1.3-inch monochromatic OLED screen
- Excellent outdoor design with IP65 waterproof rating
Dimensions & Materials
Materials
Product shell – ABS + PC plastic Transparent window – 2.5D Tempered glass
Dimensions
L 23mm x W 40mm x H 63mm
Electrical Specifications
- Power supply DC 36V/48V/ 52V
- Rated current12mA
- Shutdown leakage current<1uA
- Screen specification1.3″ OLED64*128 dots
- Communication method UART (default)
- Operating temperature-20°C ~ 60°C
- Storage temperature-30°C ~ 80°C
- Waterproof level: IP65
02 Quick Start Guide
Quick Start Guide
After unboxing and installing your CYC motor system, there are two main things you need to set up.
- Change your Battery No. setting according to your rated voltage. Within 15 seconds of turning on your display, long press the MENU button to enter the settings functions. Press UP/ DOWN to navigate the settings page & MENU to select.
*Please note that 6s to 9s is not compatible with the CYC systems. This will be removed in future batches. Our apologies for the confusion. - Change your Wheel setting according to your bike’s wheel size.
- Now, you can set things up like your temperature and speed unit as well as your brightness level. Otherwise, you’re good to go!
Functionalities
Power On/ Off
Press and hold the POWER button for 2 second to turn the display on/ off. The
display will automatically shut down when there is no operation for a period
of time. Navigation
1. POWER 2. MENU 3. UP 4. DOWN
The MENU is used to go into your main settings page & your clear data page. It is also used to enter and select a setting or function & finally, it’s also used to switch between the various main dashboard information.
Switch Dashboard
Switch the main dashboard to display different information by pressing the MENU button.
Assist Level Operating
Press the UP/ DOWN button to change the assist level between level 1, 2, and
3. Note that “OFF” means no motor asssitance will be given.
Walk Assist
Long press the DOWN button to activate walk assist. Note that it takes 3 seconds to activate & will deactivate immediately when the button is released. Walk assist can only be activated if you are assist level 1, 2, or 3.
Settings
Long press the MENU button within 15 seconds of switching on the display to enter the “Settings” page. Note that once the system has been activated for longer than 15 seconds, you will need to restart the motor system to enter the settings menu.
Clean Trip Data
Wait 15 seconds after starting up the motor system to be able to enter the “Clean Data” menu. Long press the MENU button to clear the previous trip data. Please note that the trip data does not automatically clear once you restart the motor system. This is a manual process.
Error Codes
In certain circumstances, an error code may appear on your display. Contact [email protected] for assistance. *TBC
03 Installation
Installation
- Open the display lock clip, set the display in the left handlebar (standard handlebar size22.2). Adjust it in place and tighten the screw accordingly.
Note: Damage caused by excessive torque is not covered by the warranty.
Pin Layout
- Red wire: Anode (36V to 72V)
- Black wire: GND
- Yellow wire: TxD (display -> controller)
- Green wire: RxD (controller -> display)
- Blue wire: Power cord to the controller
Certification
CE / IP65 (waterproof ) / ROHS. Be sure to contact [email protected] if further assitance is needed. Thank you!
The information contained in this document is derived from the TFT LCD Display
Guide provided by Zhejiang Topology Intelligent Technology Co., Ltd.
(otherwise known as Topology). All the information contained in this manual is
published in good faith and for general information purpose only. Contact
[email protected] for
further assistance.
© 2022 CYCMOTOR LTD