CYCMOTOR SW102 Topology Mini Display User Guide
- June 9, 2024
- CYCMOTOR
Table of Contents
SW102 Topology Mini Display
User Guide
SW102 Topology Mini Display
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology. Intelligent Technology Co., Ltd. (otherwise known as Topology). All the information contained in this manual is published in good faith and for general information purpose only. Contact technical_support@cycmotor.com for further assistance.
Product Details
Product Name
Intelligent OLED display, model :SW102
Firmware: CYCMotor Ltd specific
Features
- Minimalist design and process
- High brightness, high contrast 1.3-inch monochromatic OLED screen
- Excellent outdoor design with IP65 waterproof rating
Dimensions & Materials
Materials
Product shell – ABS + PC plastic.
Transparent window – 2.5D Tempered glass.
Dimensions
L 110mm x W 68.2mm x H 68mm
Electrical Specifications
- Power supply: DC 36V/48V/52V
- Rated current: 12mA
- Shutdown leakage current: <1uA
- Screen specification: 1.3” OLED (64*128 dots)
- Communication method: UART (default)
- Operating temperature: -20°C ~ 60°C
- Storage temperature: -30°C ~ 80°C
- Waterproof level: IP65
Quick start guide
After unboxing and installing your CYC motor system, there are two main things
you need to set up.
- Change your Battery No. setting according to your rated voltage. Within 15 seconds of turning on your display, long press the MENU button to enter the settings functions. Press UP/ DOWN to navigate the settings page & MENU to select.
6s = 22.2V
7s = 25.9V
8s = 29.6V| 9s = 33.3V
10s = 36V
11s = 40.7V
---|---
12s = 44.4V
13s = 48V
14s = 52V
*Please note that 6s to 9s is not compatible with the CYC systems. This will be removed ifuture batches. Our apologies for the confusion.
-
Change your Wheel setting according to your bike’s wheel size.
-
Now, you can set things up like your temperature and speed unit as well as your brightness level. Otherwise, you’re good to go!
Functionalities
Power On/ Off
Press and hold the POWER button for 2 second to turn the display on/ off. The
display will automatically shut down when there is no operation for a period
of time.
Navigation
- POWER
- MENU
- UP
- DOWN
The MENU button is used to go into your main settings page & your clear data
page. It is also used to enter and select a setting or function & finally,
it’s also used to switch between the various main dashboard information.
Switch Dashboard
Switch the main dashboard to display different information by pressing the
MENU button.
Assist Level Operating
Press the UP/ DOWN button to change the assist level between level 1, 2, and 3. Note that “OFF” means no motor assistance will be given.
Walk Assist
Long press the DOWN button to activate walk assist. Note that it takes 3
seconds to activate & will deactivate immediately when the button is released.
Walk assist can only be activated if you are assist level 1, 2, or 3.
Settings
Long press the MENU button within 15 seconds of switching on the display to
enter the “Settings” page. Note that once the system has been activated for
longer than 15 seconds, you will need to restart the motor system to enter the
settings menu.
Clean Trip Data
Wait 15 seconds after starting up the motor system to be able to enter the “Clean Data” menu. Long press the MENU button to clear the previous trip data. Please note that the trip data does not automatically clear once you restart the motor system. This is a manual process.
Error Codes
In certain circumstances, an error code may appear on your display. Contact technical_support@cycmotor.com for assistance.
Installation
- Open the display lock clip, set the display in the left handlebar (standard handlebar sizeΦ22.2). Adjust it in place and tighten the screw accordingly.
Note: Damage caused by excessive torque is not covered by the warranty.
Pin Layout
- Red wire : Anode(36V to 72V)
- Black wire : GND
- Yellow wire : TxD (display -> controller)
- Green wire : RxD (controller -> display)
- Blue wire : Power cord to the controller
Certification
CE / IP65 (waterproof) / ROHS.
Be sure to contact
technical_support@cycmotor.com if
further assistance is needed.
THANK YOU!
The information contained in this document is derived from the TFT LCD
Display Guide provided by Zhejiang Topology Intelligent Technology Co., Ltd.
(otherwise known as Topology). All the information contained in this manual is
published in good faith and for general information purpose only. Contact
technical_support@cycmotor.com for
further assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>