CYCMOTOR PHOTON High Powered Electric Bike Drive Unit Kit User Manual
- June 9, 2024
- CYCMOTOR
Table of Contents
photon
user manual
SAFETY & PRECAUTION
General safety
Kindly read through the entire user manual. This manual contains important
information to reduce user risk as well as instructions for this product’s
proper use. Do not discard the manual but keep it for reference.
Note that the user’s personal safety remains the user’s responsibility and
that the user must contact CYCMotor Ltd or their oficial product dealer
directly for any further guidelines or assistance.
Never interfere with the movable parts when the drive unit is connected to a
power supply. This could result in serious injury if the system is accidently
engaged.
This product is a powerful motor system that is dangerous for children and
must be handled by an adult at all times. Small components and accessories may
also present a choking hazard. Keep the motor system and accessories out of
reach from children.
All components and accessories may only be replaced with identical components
directly supplied by CYCMotor Ltd or an oficial product dealer. CYCMotor Ltd
cannot be held liable for any damages as a result of using unapproved parts.
This product only complies with local, state, and federal regulations if speed
limits are set accordingly. Ensure that you have set up your X1 Stealth kit
according to your loca, state, and federal regulations when using and
registering this drive unit on a public road/area.
Befor the Ride
Ensure that the drive unit chain has the proper tension. Incorrect tension
could cause jamming of the system and result in injury while riding. Inspect
the chain tension regularly.
Ensure that the chains are properly lubricated. Cleaning and lubricating your
chain with regular bicycle chain cleaner, is advised regularly.
When connecting a power supply, make sure that the power supply is completely
connected. Faulty connection could result in a short circuit and damage the
controller or batteries.
Inspect all electrical wires and plugs for damage regularly.
Secure all wires properly. Ensure that no loose wires are dangling from the
bike that could be jammed into any movinf parts.
Before turning on the system, ensure that the throttle can be twisted freely
without friction and that the throttle can return to its original position
withour restriction. This is to prevent any uncontrolled response of the
system.
Installation & Use
Do not install anything other than the parts and accessories that came with
this drive unit. Doing so could damage the product.
The drive system can be activated and deactivated by holding down the on/off
button the display.
Avoid changing the bke gear (note: this is difierent from the drive unit’s
assist level) while the drive unit is powering the bike. This may lead to
excessive wear on the chain and chain rings or other gear related failture.
When changing gear, use human input only. After the gear is changed, you may
accelerate again with the throttle or continue using the PAS. Take off with
the appropriate assist level & bike gear.
This product is splash proof and rain proof but NOT WATER PROOF. Do not
submerge it underwater.
Disclaimer
If you require any more information or have any questions about the user
manual disclaimer, please feel free to contact us via email at
support@cycmotor.com or call +852 3690 8938.
All the information contained in this user’s manual is published in good faith
and for general informational purposes only. CYC Motor Ltd does not make any
warranties about the completeness of this information and encourages further
inquries as stated above if needed. CYC Motor Ltd will not be held liable for
any losses and/or damages in connection with the use of this product. The use
of this product is at the user’s own risk.
Notice: Please contact CYC Motor Ltd if you are unsure about the assembly
instructions or for any further assistance as CYC Motor Ltd will be held
liable for any losses and/ or damages created by the assembly.
SPECIFICATION
Description
This product is a high-powered electric bike (ebike) drive unit kit which
includes a programmed control unit and peripherals. This product is designed
to be installed as a conversion system to convert standard bicycles into
electric bicycles.
Specifications
[Rated Voltage | 36 – 52V |
---|---|
Max. RPM at Crank | >300 RPM |
Rated Power | 1500W (CYC X6) |
Max. Rated Torque at Crank | 150 N.m. (CYC X6) |
Overall Efficiency | >90% |
Colour | Anodized Black |
Weight of Motor & Controller | 2.7kg |
Total Weight with Crank set & BB | 4.5kg |
Bracket Materials | 7075-T6 |
Crank Arm Length | 165mm or 175mm |
Q Factor | 190mm |
Control Method | FOC |
Motor Sensor | Hall & Temp. Sensor |
Chain ring | 11/53 option with 32T |
11/63 option with 38T
Compatibility| 68mm, BB92, BB30/PF30 (compatible with adapter)
Parts List
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>