RAB LHB1S-LED Linear Highbay LED Light Owner’s Manual
- June 9, 2024
- RAB
Table of Contents
RAB LHB1S-LED Linear Highbay LED Light
IDEAL APPLICATIONS
Manufacturing
Warehousing
Commercial Spaces
DESCRIPTION
The LHBS-LED series is an easy to install fixture that provides welldistributed uniform lighting and is ideal for large indoor spaces such as warehousing, commercial spaces and manufacturing applications. LHBS-LED is an ideal one-for-one replacement for conventional lighting systems such as HID and fluorescent.
FEATURES
Construction
- Steel housing with a white powder paint finish. Standard unit comes with a polycarbonate matte lens.
Electrical
- Standard fixture has a high efficiency LED driver that operates at 120-347V. Drivers have a 4KV internal surge suppressor. The operating temperature is -25°C to +50°C.
Light Performance
- Standard unit comes with a CCT selectable switch (4000K/5000K) located on top of the fixture..The fixture has a CRI of 80. The fixture has a beam angle distribution of 90 degrees.
Controls
- 12V DC Motion Sensor (easy to install with twist lock mechanism), Motion Sensor Remote Control (for custom configurations) are offered separately.
Mounting
- Standard fixture is easy to install with suspending chain (6ft long) included in the box. Wire Guard and Surface/pendant mount kit (used for surface or pendant mountings) are offered separately.
SPECIFICATIONS | LHB1S-LED110 | LHB1S-LED165 |
---|---|---|
Watts (W) | 109.6 | 162.5 |
Lumens (Lm) | 14988.6 | 22169.3 |
Efficacy (Lm/W) | 136.8 | 136.5 |
Voltage | 120-347V | |
Colour Temp | VK – Colour Selectable (4K/5K) | |
CRI | 80 | |
Dimming | 0-10V Dimming (10-100%) | |
THD | 15% | |
PF | 0.9 | |
Beam Distribution | 90 Degrees | |
LED Life @ 100,000 hours | 81% | |
Housing Finish | White | |
Housing Details | Steel | |
Lens Details | PC Matte Lens | |
Mounting | Surface Mount, Pendant Mount, Suspended Mount* | |
Number of Conduit Entries | 6 | |
Operating Temp. | -25°C to +50°C | |
Options Sold Separetely Certification | Surface/Pendant Mount Kit, Wire Guard, |
DC Motion Sensor (Microwave), Motion Sensor Remote Control, UL, Damp Location Rated, 5 Year Warranty, IP20, DLC Premium
*Standard Configuration
DIMENSIONS
AMPERAGE DRAW & SURGE PROTECTION
CURRENT (A) SURGE PROTECTION (kV)
| 120V 208V| 240V| 277V| 347V| 120-347V
LHB1S-LED110| 0.97A 0.56A| 0.49A| 0.42A| 0.34A|
4kV
LHB1S-LED165| 1.45A 0.84A| 0.73A| 0.63A| 0.50A
TM-21 ESTIMATED LUMEN MAINTENANCE
| 50,000 Hours| | 75,000 Hours| | 100,000 Hours
---|---|---|---|---|---
LHB1S-LED| 90.3%| | 85.7%| | 81.4%
WEIGHTS (lbs)
LHB1S-LED | 8.8 |
---|
SPECIFICATIONS
Model Number Voltage (V)| Power (W)| Light Output (lm)
14989
| Efficacy (lm/W) 136.8| THD (%)| PF CCT (K)
---|---|---|---|---|---
LHB1S-LED110-H-VK-XXX-DIM| 120-347| 110| 15.0| 0.900| 4000/5000
LHB1S-LED165-H-VK-XXX-DIM| 120-347| 162| 22169| 136.5| 15.0| 0.900| 4000/5000
LHBS DC MOTION SENSOR (MICROWAVE) SETTINGS
SPECIFICATIONS
Operating Voltage| 12V DC
Operating Current| 30mA
Output| 0-10V DC
Stand-by Power| 0.5W
Frequency| 5.8GHz +/-75MHz
IP Rating| IP65
Detection Angle| 30° – 150°
Mounting Height| Max 15m (50ft)
Brightness| 70%/80%/90%/100%
Sensitivity| 20%/50%/75%/100%
Hold time| 10s/1min/10min/30min
Daylight threshold| 10Lux/30Lux/50Lux/100Lux/Disabled
Stand-by time| 1min/30min/60min/+∞
Stand-by Dimming Level| 10%/20%/30%/50%
DEFAULT SETTINGS
Brightness| 70%
Sensitivity 20%
Hold time| 10s
Daylight threshold Disabled
Stand-by time| + ∞
Stand-by Dimming Level 10%
SENSOR DETECTION RANGE (M)
Well Covered
Covered
LHBS DC MOTION SENSOR REMOTE CONTROL
TOP SECTION: Settings Display Area
BOTTOM SECTION: Button Setting Area
SPECIFICATIONS
BUTTON | FUNCTION |
---|---|
ON/OFF | Long press until the brightness indicator light is on. Then |
press to permanently turn on and off the fixture.
BRIGHTNESS| Sets the highest light fixture brightness when motion is
detected.
SEND| Uploads the selected remote-control parameters to the light fi
ture sensor.
HOLD TIME| The time the light fixture will remain at the brightness
setting after it detects motion.
STAND-BY DIM| The Dim level that the light fixture will dim down to
after the Hold Time has expired.
STAND-BY TIME| The time the light fixture will remain in the Stand-by
dim state before it shuts off. To disable the light from shutting off, select
the INFINITY icon.
SENSITIVITY| Sets the sensitivity to which the sensor will detect
motion.
DAYLIGHT| The lux setting at which the light fixture will turn on/off.
If the ambient lux is more than the defined lux setting, the fixture & sensor
function will turn off and remain off until the ambient lux is below the
setting. Long press until the daylight indicator light is on. Then press to
select the desired lux setting. To disable daylight sensor, long press again.
RESET| Resets the light fixture sensor parameters to the default
settings.
– / +| Press to increase or decrease brightness from 0% to 100%.
TEST| Press to test the sensor (hold time is only 3s).
Note: The sensor cannot be programmed with the remote control when standing right under it. It is recommended to use brand new batteries in remote control.
PROGRAMMING INSTRUCTIONS
-
Press ON/OFF button
-
Select Settings
• Select brightness level by pressing Brightness Button.
• Select hold time by pressing Hold Time Button.
• Select Stand by Dim by pressing Stand By Dim Button.
• Select Stand by Time by pressing Stand By Time Button.
• Select Sensitivity by pressing Sensitivity Button.
• Optional: If Daylight sensor is desired, long press Daylight Button and then choose the daylight setting. -
Press send, fixture responds to signal by strobing.
LHB1S-LED110-H-VK-DIM (5000K) MOUNTED AT 15 FEET
LHB1S-LED165-H-VK-DIM (5000K) MOUNTED AT 20 FEET
COLOUR SELECTABLE SWITCH
The switch is located on top of the fixture
Easily change the colour temperature with the flip of a switch.
Setting 1 – 4000K
Setting 2 – 5000K
ORDERING GUIDE
Fixture| Wattage| Voltage| Colour Temp.| Finish| Dimming
LED110 LED165| H – 120-347V| VK – Colour Selectable (4000K/5000K)| WHT –
White| DIM – 0-10V Dimming
Note: Standard fixture comes with 6ft long suspending chain.
ACCESSORIES
081072 – LHB1S/2S PENDANT/SURFACE MOUNT KIT
081074 – LHB1S WIRE GUARD KIT
080909 – DC MOTION SENSOR
080970 – DC MOTION SENSOR REMOTE C ONTROL
CUSTOMER SUPPORT
RAB DESIGN LIGHTING INC. | 1-222 Islington Avenue. Toronto, ON, M8V 3W7 | 1-800-268-0381 | rabdesign.ca
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>