RACKMOUNT IT RM-WG-T7 Rack Mounting Kit for WatchGuard Firebox Instruction Manual
- October 30, 2023
- RACKMOUNT IT
Table of Contents
RACKMOUNT IT RM-WG-T7 Rack Mounting Kit for WatchGuard Firebox
MOUNTING INSTRUCTIONS
- Place the power supply on the rack and tie it down with 2 zip ties.
- Remove the 4 rubber feet from the WatchGuard.
- Remove the bolt from the side of the appliance with the Torx key.
- Place your WatchGuard unit on the rack and fix the unit with the provided bolt and tighten it lightly.
- Tie the excess length of the power cable down with the 3rd zip tie.
- Connect the cables from your WatchGuard to the connectors. Tip: start with the bottom row.
- Optional: use two zip ties to hold the cables together.
- Place your WG-Rack in your 19 inch rack.
Please ensure proper ventilation according to the network appliance manufacturer guidelines.
Please note that this unit is slightly higher than 1U.
PACKAGE CONTENTS
| Qty | Description |
|---|---|
| 1 | WG-Rack + RJ45 couplers |
| 5 | Zip ties |
| 1 | Torx key |
| 1 | Bolt 3x6mm |
| 10 | Cables – 0.5 meter |
Industrial version is supplied with shielded couplers and cables Revision 5 – 09-06-2021
Consider the environment, recycle where applicable.
Rackmount.IT rack mount kits are RoHS compliant, developed & manufactured in the Netherlands and made of first quality parts.
In case of problems please contact your reseller or [email protected].
Revision 5 – 09-06-202
DIMENSIONS 1.3/2U
COLOR WatchGuard Red
PACKING DIMENSIONS 80 x 520 x 270 mm
3.14 x 20.47 x 10.63 in
PRODUCT DIMENSIONS 46 x 482 x 217 mm
(height x width x depth) 1.81 x 18.98 x 8.54 in
Customer Support
EMEA Office
Nonnenveld 27
4811 HN Breda
The Netherlands
T +31 76 200 37 40
E [email protected]
WWW.RACKMOUNT.IT
US Office
9201 Metric Blvd – Unit A
Austin – TX 78758
United States
T +1 512 521 03 33
E [email protected]
