B-TECH BT7875 Mounting Plate Installation Guide
- June 9, 2024
- B-TECH
Table of Contents
B-TECH BT7875 Mounting Plate
Product Information
Installation Safety Instructions
- The mount is intended for use only with the maximum weights indicated on the product and packaging.
- Do not attempt to install the product until all instructions and warnings have been read and properly understood.
- Check carefully to make sure there are no missing or defective parts – defective parts must never be used.
- Most AV equipment is of a fragile nature, possibly heavy and easily damaged if dropped. Great care must always be taken during installation.
- Do not mount any AV equipment that exceeds the specific weight limit of the product being installed.
- Check load capacity of the structure prior to installation as some surfaces may not be suitable for installation.
- Designed for indoor use, this mount is suitable for public or home installation.
- If located in a public or frequently populated area ensure that the product is out of the immediate reach of people.
- When drilling holes, avoid contact with electrical cables and water or gas pipes contained within. Use of a good quality live wire detector and hidden object locator is recommended. Only drill into structures when you are sure it is safe to do so.
- Do not attempt to install this product until all instructions and warnings have been read and properly understood.
- Please keep these instructions for future reference.
- Please check carefully to make sure there are no missing or defective parts – defective parts must never be used.
- B-Tech AV Mounts, its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions. In such cases, all guarantees will expire.
General
- B-Tech AV Mounts recommends that a professional AV installer or other suitably qualified person install this product.
- Great care must always be taken during installation as most AV equipment is of a fragile nature, possibly heavy and easily damaged if dropped.
- If you do not fully understand the instructions or are not sure how to install this product safely, then please consult a professional for advice and/or to install this product for you. Failure to mount this product correctly may cause serious injury or death both during installation and at any time thereafter.
- Do not mount any AV equipment that exceeds the specific weight limit of the product you are installing.
- This weight limit will be clearly stated on each product and its packaging and will vary from product to product.
Product location
-
Please pay careful attention to where this product is located. Check load capacity of the structure prior to installation as some surfaces are not suitable for installation.
-
Designed for indoor use, this mount is suitable for public or home installation If located in a public or frequently populated area ensure that the product is out of the immediate reach of people.
-
If any AV equipment is to be suspended over the likely path or location of people then great care should be taken to
secure all parts of the installation from falling. -
When drilling holes it is essential to avoid contact with electrical cables and water or gas pipes contained within.
-
Use of a good quality live wire detector and hidden object locator is therefore recommended.
-
Only drill into structures when you are sure it is safe to do so.
Fixing hardware
- It is highly recommended that all fixing screws be used where supplied and that the purpose of all other fixing hardware is fully understood. In some cases more AV equipment fixing hardware will be supplied to accommodate different models of equipment and set up configurations.
- The installer must be satisfied that any supplied fixing hardware is suitable for each specific installation. The fixing kit supplied with the product may not be suitable for all walls.
- If any fixing screws or included hardware are deemed not sufficient for a safe installation then please consult a professional or your local hardware store.
Hazard limitation
- When routing cables take advantage of any built in cable management features that the product might provide and ensure that all cables are tidy and secure. Check to see that any moving aspect of the product can do so unhindered by any cabling. Some products have moving parts and the potential to cause injury through the crushing or trapping of fingers or other body parts. Particular attention to the nature of moving parts is required especially when assembling installing and adjusting during set up. Immediately after installation double-check that the work done is safe and secure. Double-check all necessary fixings are present and are of ample tightness.
- It is recommended that periodic inspections of the product and its fixing points are made as frequently as possible (no more than 6 months apart) to ensure that safety is maintained.
- If in doubt consult a professional AV installer or other suitably qualified person.
Parts List
- Mounting bracket
- Screws and bolts
- Installation instructions
Product Dimensions
- Width: 90mm (3.5″)
- Height: 60mm (2.3″)
- Depth: 63mm (2.5″)
- Weight limit: 3kg (6.6lbs)
| ITEM | PART NAME | QTY |
|---|---|---|
| 1 | ADAPTOR PLATE | 1 |
| 2 | UNC 1/4 -20 x 1/2″ SCREW | 2 |
| 3 | M4 x 8mm SCREW | 4 |
| 4 | SPACER | 4 |
Suitable for loads up to 4kg (8.Slbs)
B-Tech Contact Details
- Website: www.btechavmounts.com
- Email: info@btechavmounts.com
- Phone: + 202 23480700/15
Product Usage Instructions
- Read and understand all safety instructions and warnings before attempting to install the product.
- Check that all parts are included and in good condition before installation.
- Ensure that the installation location is suitable and can support the weight of the product and the AV equipment to be mounted.
- If unsure about how to install the product safely, consult a professional.
- Follow the installation instructions carefully, using the screws and bolts provided.
- If drilling holes, use a good quality live wire detector and hidden object locator to avoid contact with electrical cables and water or gas pipes contained within.
- Do not attempt to mount any AV equipment that exceeds the specific weight limit of the product being installed.
- If located in a public or frequently populated area, ensure that the product is out of the immediate reach of people.
- If any AV equipment is to be suspended over the likely path or location of people then great care should be taken to secure all parts of the installation from falling.
SPECIFICATIONS
-
Mounts Yealink UVC40 or Meeting Eye Video Bar,
Logitech Meetup Video Conferencing Camera or a Poly Studio X30 to a range of B-Tech products -
Suitable for pole mounting using a B-Tech accessory collar or can be mounted directly to a System X column
-
Use with BT8390-SA mounting arm to mount a video bar above or below a screen mounted on a System X rail
INSTALLATION INSTRUCTIONS
- RAIL MOUNTING
Fix item 1 to a BT8390-SA /BT7031 Adjustable Mounting Arm using the fixings supplied with the Mounting Arm.
- POLE MOUNTING
Use an Accessory Collar (BT7052/BT7841) to mount item 1 onto a 050mm Pole (BT7850/BT4116/BT4118/BT8504) using the fixings supplied with the Collar.
- COLUMN MOUNTING
Insert 2x MB insert nuts (supplied with column) into the front channels of the Column (BTB3BO / BTB3B1) and fix item 7 using the screws supplied with the Column.
- MOUNTING YEALINK UVC40
Mount the Yaelink UVC40 onto item 7 and secure in place using item 2.
- MOUNTING LOGITECH MEETUP
- Fix item 7 to a Mounting Adaptor/Collar/Column, as shown in Step 7.
- Attach the Logitech Meetup mounting bracket (supplied with VC camera) to item 7 using items 3 & 4.
- **Hook the Logitech Meetup onto the bracket using the slot in the mounting bracket.
**
DIMENSIONS
FRONT VIEW
TOP VIEW
THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
CONTACT:
info@btechavmounts.com
©2022 B-Tech International Design and Manufacturing Ltd. All rights reserved.
B-Tech AV Mounts is a division of B-Tech International Design and
Manufacturing Ltd. B-Tech AV Mounts and the B-Tech logo are registered trade
marks.
All other brands and product names are trademarks of their respective owners.
Photographs are for illustrative purposes only. E&OE.
AMA-BT7875-V1 .1-PROBX-1122-57 MADE IN THE UK
@ For More Information Visit www.btechavmounts.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>