STIHL FSE 52 Powerful Electric Grass Trimmer Instruction Manual

Introduction

Dear Customer,
Thank you for choosing STIHL. We develop and manufacture our quality products to meet our customers’ requirements. The products are designed for reliability even under extreme con‐ditions.
STIHL also stands for premium service quality. Our dealers guarantee competent advice and instruction as well as comprehensive service support.
STIHL expressly commit themselves to a sus‐tainable and responsible handling of natural resources. This user manual is intended to help you use your STIHL product safely and in an environmentally friendly manner over a long service life.
We thank you for your confidence in us and hope you will enjoy working with your STIHL product.
Dr. Nikolas Stihl
IMPORTANT! READ BEFORE USING AND KEEP IN A SAFE PLACE FOR REFERENCE.

Guide to Using this Manual

Applicable Documentation

Local safety regulations apply.

• Read, understand and save the following documents in addition to this instruction man‐ual:
  • Instruction manual and packaging of the cutting attachment you are using

Symbols used with warnings in the text

WARNING

• This symbol indicates dangers that can cause serious injuries or death.
  •  The measures indicated can avoid serious injuries or death.

NOTICE

• This symbol indicates dangers that can cause damage to property.
  • The measures indicated can avoid damage to property.

Symbols in Text

This symbol refers to a chapter in this instruction manual.

Overview

TrimmerTrimmer with fanwheel

1. Trigger
   The trigger switches the motor on and off.

2. Appliance Plug
   Connects connecting cable to extension cable.

3. Control Handle
   For operating, holding and controlling the trimmer.

4.   Connecting Cable
   Connects trimmer to appliance plug.

5. Trigger Lockout
   Unlocks the trigger.

6. Star Knob Nut
   Secures loop handle to shaft.

7. Lock Button
   Locks the shaft at the required length.

8. Loop Handle
   For holding and controlling the trimmer.

9. Shaft
   Connects all components.

10. Bump Guard

Helps protect objects from contact with the cutting attachment.

Rating Label with Serial Number

Deflector and Cutting Attach‐ments

Trimmer with fanwheel

1. Line Limiting Blade
   Trims nylon lines to correct length.

2. Mowing Head
   Holds the nylon lines.

3. Fanwheel
   Cools the electric motor.

4. Deflector
   Protects user from flying debris and contact with the cutting attachment.

Trimmer without fanwheel

1. Deflector
   Protects user from flying debris and contact with the cutting attachment.

2. Line Limiting Blade
   Trims nylon lines to correct length.

3.  Mowing Head
   Accommodates the nylon lines.

4.  Mowing Line

Symbols

Meanings of symbols that may be on the trim‐mer:

This symbols indicates that the length of the shaft is adjustable.
This symbols indicates that the control han‐dle can be rotated 90°.

according to directive 2000/14/EC in dB(A) in order to make sound emissions of products comparable.
Do not dispose of the product with your household waste.

Safety Precautions

Warning Signs

Warning Symbols

Meanings of warning signs on the trimmer:

• Observe safety notices and take the necessary precautions.
• Read, understand and save the instruction manual.
• Wear safety glasses.
• If the connecting cable or extension cable is damaged: Disconnect the plug from the wall outlet.
• Wait until the cutting attachment comes to a complete stop.
• Protect the trimmer from rain and dampness.

Intended Use

The STIHL FSE 52 trimmer is designed for mow‐ing grass.
The trimmer must not be used in the rain.

WARNING

• Using the trimmer for purposes for which it is not designed may result in serious or fatal inju‐ries and damage to property.
  • Use the trimmer with an extension cable.
  • Use the trimmer as described in this instruction manual.

The Operator

WARNING

•  Users who have had no instruction cannot rec‐ognize or assess the risks involved in using the trimmer. The user or other persons may sustain serious or fatal injuries.
  • Read, understand and save the instruction manual.
  • If the trimmer is passed on to another user: Always give them the instruction manual.
  • Make sure the user meets the following requirements:
  •  The user must be rested.
  • The user must be in good physical condition and mental health to operate and work with the trimmer. If the user’s physical, sen‐sory or mental ability is restricted, he or she may work only under the super‐vision of or as instructed by a responsible person.
  •  The user is able to recognize and assess the risks involved in using the trimmer.
  • accordance with national rules and regulations.

The user must be of legal age or is being trained in a trade under supervision in

• The user has received instruction from a STIHL servicing dealer or other experienced user before working with the trimmer for the first time.
• The user must not be under the influ‐ence of alcohol, medication or drugs
• .If you have any queries: Contact a STIHL servicing dealer for assistance.

Clothing and equipment

WARNING

•  Objects can be thrown at high speed during operation. This may result in injury to the user.
  •  Wear close-fitting safety glasses. Suitable safety glasses are tested in accordance with EN 166 or national regulations and available commer‐cially with the corresponding mark‐ing.
  • Wear face protection.
  • Wear long trousers made from resistant material.
•  Dust can be whipped up during operation. Whipped up dust can damage the respiratory passages and cause allergic reactions.
  •  If dust is generated: Wear a dust respirator mask.
• Inappropriate clothing can snag on wood, brush or the brushcutter. Users not wearing suitable clothing are at risk of serious injury.
• Wear close-fitting clothing.
•  Remove scarves and jewelry.
  • The user may come into contact with the rotat‐ing cutting attachment during operation. This may result in serious injury to the user.
  •  Wear robust footwear.
  •  Wear long trousers made from resistant material.
  • There is a risk of the user coming into contact with the cutting attachment or the line limiting blade during cleaning and maintenance work and when the cutting attachment is mounted or removed. This may result in injury to the user.
•  Wear work gloves made from resistant material.
•  Wearing unsuitable footwear may cause the user to slip. This may result in injury to the user.
•  Wear sturdy, closed-toed footwear with high-grip soles.

Trimmer

WARNING

Bystanders, children and animals are not aware of the dangers of the trimmer or flying debris. Bystanders, children and animals may be seriously injured and damage to property may occur.

Do not allow bystanders, children or animals within 15 meters of the work area.

• Maintain a clearance of 15 meters from objects.
• Do not leave the trimmer unattended.
• Make sure that children cannot play with the trimmer.
  • ■ The trimmer is not waterproof. Working in the rain or a damp location may result in an elec‐tric shock. This can result in injuries to the user and may damage the trimmer.
•  Do not work in the rain or a damp location.
  •  Electrical components of the trimmer can pro‐duce sparks. Sparks may cause a fire or an explosion in an easily combustible or explo‐sive environment. This can result in serious or fatal injuries and damage to property.
  •  Do not work in an easily combustible or explosive environment.
  • Persons may trip over the extension cable. This can result in injuries and may damage the trimmer.
•  Lay the extension cable flat on the ground and make sure it is easily visible.
  •  The cutting attachment and deflector are prop‐erly mounted.
  •  Genuine STIHL accessories for this brushcut‐ter are fitted.
  •  The accessories are correctly attached.

WARNING

•  If not in safe condition, components may no longer operate correctly and safety devices may be disabled. This may result in serous or fatal injury to people.
•  Work only with an undamaged brushcutter.
•  Work only with an undamaged extension cable and an undamaged plug.
•  If the brushcutter is dirty or wet: Clean the brushcutter and allow it to dry.
•  Never attempt to modify your brushcutter. Exception: Mounting one of the combina‐tions of cutting attachment and deflector recommended in this user manual.
• If the controls do not function properly: Do not use your brushcutter.
• Never mount metal cutting attachments.
•  Fit genuine STIHL accessories for this brushcutter.
• Mount the cutting attachment and deflector as described in this user manual.
• Attach accessories as described in this User Manual or in the User Manual for the accessories.
• Never insert objects in the openings of the brushcutter.
• Replace worn or damaged labels.
•  If you have any doubts, be sure to consult a STIHL dealer.

Deflector
The deflector is in a safe condition if the following points are observed:

• * The deflector is not damaged.

  • The line limiter blade is correctly installed.

WARNING

• If the product does not comply with safety requirements, components will no longer func‐tion properly or safety devices may be ren‐dered inoperative. This can result in serious injuries.
• Work only with an undamaged deflector.
•  Work with a correctly installed line limiter blade.
• If you have any queries: Contact your STIHL servicing dealer.

Safety Precautions

Mowing Head

The mowing head is in a safe condition if the fol‐lowing points are observed:

• The mowing head is not damaged.
• The mowing head is not jammed.
• The mowing lines are properly installed.
• The wear limits are not exceeded.

WARNING

• If they are in an unsafe condition, parts of the mowing head or mowing lines may come off and be ejected at high speed. They may cause serious injury to persons.
• Work only with an undamaged mowing head.
• Never use metal objects in place of the nylon mowing lines.
• Observe and remain inside the wear limits.
• If you have any doubts, be sure to consult a STIHL dealer.

Working

WARNING

• In certain situations, the user may no longer be able to concentrate on their work. This may result in the user stumbling, falling and suffer‐ing serious injury.
• Work carefully and in a considered manner.
• If light and visibility are poor: Do not use your trimmer.
• Operate the trimmer alone.
• Keep the cutting attachment close to the ground.
• Watch out for obstacles.
• Work standing on the ground and keep your balance.
• If you feel tired, take a break.
• The rotating cutting attachment can cut the user. This may result in serious injury to the user.
• Do not touch the rotating cutting attach‐ment.

If the cutting attachment is blocked by an object: Switch off the brushcutter and remove the extension cable connection from the brushcutter plug. Only then should you remove the object.

• If the behavior of the trimmer changes during operation or feels unusual, it may no longer be in a safe condition. This can result in serious injury to people and damage to property.
• Stop work, remove extension cable connec‐tion from brushcutter plug and contact your STIHL servicing dealer for assistance.
• Vibrations may occur during brushcutter oper‐ation.
• Wear gloves.
• Take breaks.
• If signs of a circulatory disturbance occur: Consult a doctor.
• If the cutting attachment makes contact with a foreign object during operation, the object or parts of it may be thrown at high speed. Per‐sons may be injured or property damaged.
• Remove foreign objects from the working area.
• Note that the cutting attachment contin‐ues to rotate for a short period after you release the trigger. There is a risk of serious injury to persons.
• Wait until the cutting attachment comes to a complete stop.
• If the rotating cutting attachment makes con‐tact with a hard object, sparks may occur and the cutting attachment may be damaged. Sparks can cause fires in a flammable envi‐ronment. Persons may be seriously or fatally injured and property may be damaged.
• Do not use in a flammable environment.
• Make sure the cutting attachment is in a safe condition.

Connecting to the power supply

Contact with live components may occur for the following reasons:

• * The connecting cable or the extension cord is damaged.

  • The mains plug of the connecting cable or extension cord is damaged.
  • The socket is not properly installed

. DANGER

• Contact with live parts may result in electric shock. This may result in serious or fatal injury to the user.
• Make sure that the connecting cable, exten‐sion cord and their mains plugs are undam‐aged.

If the connecting cable or the extension cord is damaged:

• Do not touch the damaged area.
• Disconnect the mains plug from the power supply.
• Make sure your hands are dry before touch‐ing the connecting cable, extension cord or mains plugs.
• Plug the mains plug of the connecting cable or extension cord into a properly installed, shockproof socket with the correct fuse rat‐ing.
• Connect the brushcutter via a ground fault circuit interrupter (30 mA, 30 ms).
• A damaged or unsuitable extension cord can result in electric shock. There is a risk of seri‐ous or fatal injury.
•  Use an extension cord with the correct cross-section, 19.2.
•  Use a splash water protected extension cord approved for outdoor use.
• Use an extension cable with the same specifications as the brushcutter’s connect‐ing cable, 19.2.

WARNING

• Overvoltage can occur in the brushcutter if the line voltage and/or frequency are incorrect during operation. This can damage the brush‐cutter.
• Make sure the line voltage and frequency of the power supply agree with the data on the brushcutter’s rating label.
  • If several electric power tools are connected to a multiple socket, electrical components may be overloaded during operation. The compo‐nents may overheat and cause a fire. Persons may be seriously or fatally injured, and prop‐erty may be damaged.
•  Connect the brushcutter to a separate wall outlet.
• Do not connect the brushcutter to a multiple socket.
  •  An incorrectly routed connecting cable or extension cord may be damaged, and people may trip over it. People may be injured, and the connecting cable or extension cord may be damaged.
• Position the connecting and extension cables so that there is no risk of contact with the cutting attachment.
• Route and mark the connecting cable and extension cord so that people will not trip over them.
• Route the connecting cable and extension cord so that they are not under tension or tangled.
•  Route the connecting cable and extension cord so that they will not be damaged, kinked or crushed and will not be chafed.
•  Protect the connecting cable and extension cord from heat, oil and chemicals.
• Lay the connecting cable and extension cord on a dry surface.
  • The extension cord warms up in operation. If that heat cannot escape, it may cause a fire.
• If using a cable reel: completely unroll the cable reel.

Transporting

Trimmer

WARNING

• The trimmer may turn over or shift during transport. This may result in personal injuries and damage to property.
  • Disconnect extension cable’s coupling from trimmer’s plug.
  • Secure the trimmer with lashing straps, belts or a net to prevent it turning over and moving.

Storing

Trimmer

WARNING

•  Children are not aware of and cannot assess the dangers of a trimmer and can be seriously injured.
  •  Disconnect extension cable’s coupling from trimmer’s plug.
•  Store the trimmer out of the reach of children.
  •  Dampness can corrode the electrical contacts on the trimmer and metal components. This can damage the trimmer.
  •  Disconnect extension cable’s coupling from trimmer’s plug.
  • Store the trimmer in a clean and dry condition.

Cleaning, Maintenance and repair

WARNING

• The brushcutter may be switched on uninten‐tionally if it remains connected to the power supply during cleaning, maintenance or repair operations. This can result in serious injury to people and damage to property.
  • Disconnect extension cable connection from brushcutter plug.
  • Aggressive cleaning agents, water jets or pointed objects can damage the trimmer, deflector and the cutting attachment.

If the brushcutter, deflector and cutting attachment are not cleaned correctly, components may no longer function properly or safety devices may be rendered inoperative. There is a risk of serious injury to persons.

 Preparing Trimmer for operation

Preparing Trimmer for Opera‐tion

Perform the following steps before starting work :

•  Make sure the following components are in a safe condition:
  • Trimmer and connecting cable, 4.6.1.
  • Deflector, 4.6.2.
  • Mowing head, 4.6.3.
•  Clean the trimmer, 15.1.
• Mount the deflector, 6.1.
•  Fit spool when using trimmer without fan‐wheel, 6.2.
• Fit spool when using trimmer with fanwheel,
• Mount the loop handle, 6.3.
•  Adjust length of shaft, 7.1.
• Adjust the loop handle, 7.3.
• Connect trimmer’s plug to an extension cable and the extension cable’s plug to a convenient wall outlet.
• Check the controls, 10.1.
• If you cannot carry out the above steps: Do not use your trimmer and contact a STIHL dealer for assistance.

Assembling the Trimmer

Mounting the Deflector

• Switch off the trimmer and disconnect extension cable’s coupling from trimmer’s plug.

The line limiting blade

1. is already installed in the deflector

2. and must not be removed.► Push the deflector (2) into the guides on the housing as far as stop.
   The deflector (2) is tight against the housing.

   •  Insert and tighten down the screws (3) firmly. The deflector (2) must not be removed again.

Mounting and Removing the Mowing Head

 Mounting the Mowing Head Trimmer with fanwheel]

• Switch off the trimmer and disconnect exten‐sion cable’s coupling from trimmer’s plug.

•  Fit the fanwheel

  •  on the shaft
  •  with fan blades facing down.

If the fanwheel is not fitted, the motor will not be cooled properly and it will not be possible to remove the mowing head.

• Hold fanwheel
  •  steady with one hand.
• Fit the mowing head
  •  on the shaft
  • and screw it on counterclockwise.

Trimmer without fanwheel
The trimmer comes with the AutoCut 2-2 mowing head already mounted. The spool can be fitted by the user.

• Switch off the trimmer and disconnect exten‐sion cable’s coupling from trimmer’s plug.

• Place spool in a container filled with water for 12 to 24 hours before installing.
  This makes the nylon mowing lines supple.

•  Thread the ends of the nylon lines (4) from the spool (2) through the openings (1) in the mow‐ing head (5).

•  Insert the spool (2) in the mowing head (5).

• Fit the cover (7) on the mowing head (5) so that its tabs (3) line up with the openings (6) in the mowing head (4).
  Push the cover (7) onto the mowing head (5) as far as stop.
  The tabs (3) engage audibly.

Removing the Mowing Head

Trimmer with fanwheel

• Switch off the trimmer and disconnect exten‐sion cable’s coupling from trimmer’s plug.
•  Hold fanwheel (2) steady with one hand.
• Unscrew the mowing head (1) counterclock‐wise.
• Remove the fanwheel.
  Trimmer without fanwheel

The trimmer comes with the AutoCut 2-2 mowing head already mounted and cannot be removed by the user.. The spool can be removed by the user.

• Switch off the trimmer and disconnect exten‐sion cable’s coupling from trimmer’s plug.

• Press in the tabs (1) and remove the cover (3).

• Remove the spool (2).

Mounting the Loop Handle

• Switch off the trimmer and disconnect exten‐sion cable’s coupling from trimmer’s plug.

• Line up the loop handle (2) so that the recess for the star knob nut (1) is on the right of the control handle and the openings in the loop handle (2) are facing the operator.

• Ease the ends of the loop handle (2) apart and push it onto the control handle until it engages in position.

• Insert the screw (3) through the hole.

• Fit the star knob nut (1) and tighten it down. The loop handle (2) must not be removed again.

Adjusting Trimmer for User

Adjusting Length of Shaft

The length of the shaft can be adjusted to suit the height and reach of the user.

• Switch off the trimmer and disconnect exten‐sion cable’s coupling from trimmer’s plug.

• Hold the shaft firmly.

• Line up the loop handle (2) so that the recess for the star knob nut (1) is on the right of the control handle and the openings in the loop handle (2) are facing the operator.

•  Ease the ends of the loop handle (2) apart and push it onto the control handle until it engages in position.

• Insert the screw (3) through the hole.

• Fit the star knob nut (1) and tighten it down. The loop handle (2) must not be removed again.

Insert the plug (1) into the extension cable coupling (2).

The strain relief (cable retainer) protects the con‐necting cable from damage.

• Make a loop in the extension cable.
• Pass the loop (3) through the opening (4).
• Slip the loop (3) over the hook (5) and pull it fight.
• Insert the extension cable’s plug in a properly installed wall outlet.

Switching the Trimmer

On/Off

Switching On

• Hold the trimmer firmly with one hand on the control handle – wrap your thumb around the handle.

• Hold the trimmer firmly with the other hand on the loop handle – wrap your thumb around the handle

•  Depress the trigger lockout (1) with your hand and hold it there.

• Pull the trigger (2) with your index finger and hold it there.
  The motor accelerates and the cutting attach‐ment rotates.

Switching Off

Checking the controls
Trigger lockout and trigger

• Switch off the brushcutter and remove exten‐sion cable connection from brushcutter plug.

• Try pressing the trigger without pressing the trigger lockout.
  If you can press the trigger: Stop using your brushcutter and contact a STIHL dealer. The trigger lockout is faulty.

•  Press and hold the trigger lockout.

•  Press and release the trigger.

• If the trigger or trigger lockout is stiff or does not spring back to the idle position: Do not use your brushcutter and contact your STIHL dealer for assistance.
  The trigger or the trigger lockout is defective.

Switching the Brushcutter on

• Connect the brushcutter to a separate wall outlet.

•  Press and hold the trigger lockout.

• Press and hold the trigger.
  The cutting attachment rotates.
  Release the trigger.
  The cutting attachment stops rotating after a brief delay.

• If the cutting attachment continues to rotate: Stop work, remove extension cable conection from brushcutter plug and contact your STIHL servicing dealer for assistance.
  The brushcutter is defective.

Operating the Trimmer

Holding and Controlling the trimmer

• Hold the trimmer with one hand on the control handle – wrap your thumb around the control handle.
• Hold the trimmer with the other hand on the loop handle – wrap your thumb around the loop handle

 Mowing

The cutting height is determined by the distance of the cutting attachment from the ground..

• Swing the brushcutter steadily back and forth in an arc.
•  Move forward slowly in a controlled manner.
• If you work with a bump guard: Extend the bump guard (1) fully.

Adjusting Nylon Line

Tap the rotating mowing head on the ground. About 30 mm of fresh nylon line is advanced. The line limiting blade in the deflector trims the mowing lines to the correct length

Automatic feed will not take place if the mowing lines are shorter than 25 mm..

Switch off the trimmer and disconnect exten

 After Finishing Worksion cable’s coupling from trimmer’s plug.

•  Press the button on the mowing head and hold it depressed.
• Pull out the mowing lines.
•  If the mowing lines cannot be pulled out to required length: Install a new spool with mow‐ing line.
  The spool is empty.

After Finishing Work

12.1 After Finishing Work

• Switch off the trimmer and disconnect exten‐sion cable’s coupling from trimmer’s plug.
• If the trimmer is wet: Allow the trimmer to dry.
• Clean the trimmer.
• Clean the deflector.
• Clean the cutting attachment.

Transporting

Transporting the brushcutter

• Switch off the brushcutter and remove exten‐sion cable connection from brushcutter plug.
• Adjust the shaft to its shortest length. Carrying the brushcutter
• Carry the brushcutter in one hand properly balanced by the shaft, with the cutting attach‐ment behind you.

Transporting the trimmer in the car

• Secure the trimmer to prevent turnover and movement.

Storing

Storing the Trimmer

• Switch off the trimmer and disconnect exten‐sion cable’s coupling from trimmer’s plug.
• Remove the mowing head.
• Observe the following points when storing the trimmer:
  • The trimmer is out of the reach of children.

Cleaning

Cleaning the Brushcutter

• Switch off the brushcutter and remove exten‐sion cable connection from brushcutter plug.
• Clean the brushcutter with a damp cloth.
• Clean vents with a paintbrush.

Cleaning the Deflector and Cut‐ting Attachment

•  Switch off the trimmer and disconnect exten‐sion cable’s coupling from trimmer’s plug.
• Clean the deflector and cutting attachment with a damp cloth or a soft brush.

Maintenance

Maintenance Intervals

The maintenance intervals are dependent on the environmental and operating conditions. STIHL recommends the following maintenance inter‐vals:
Every 12 months
Have the trimmer checked by a STIHL servic‐ing dealer.

Repairing

Repairing the Trimmer and Cutting Attachment

The trimmer and cutting attachment cannot be repaired by the user.

• If the trimmer or cutting attachment is dam‐aged: Do not use your trimmer or cutting attachment and contact your STIHL servicing dealer for assistance.

 Troubleshooting

 Troubleshcooting Trimmer

• Reconnect connecting cable plug or extension cable plug.

Miniature circuit breaker (fuse) or ground fault circuit interrupter has trip‐ ped. Circuit is overloaded or faulty.|  Determine reason for circuit breaker tripping and rectify the problem. Switch on miniature circuit breaker (fuse) or ground fault circuit interrup‐ ter.

Switch off other consumers in the same circuit.

Trimmer cuts out during operation.

| Wall outlet’s fuse rating is too low.|

• Insert the connecting cable plug in a wall outlet with the correct fuse rating,     19.1.

Wire gauge of extension cable is wrong.|

• Use an extension cable of the right wire gauge.     19.2

The extension cable is too long.|

• Use an extension cable of the cor‐ rect length,     19.2

Connecting cable plug or extension cable plug has been pulled out of wall outlet.|

• Reconnect connecting cable plug or extension cable plug.

Miniature circuit breaker (fuse) or ground fault circuit interrupter has trip‐ ped. Circuit is overloaded or faulty.|

• Determine reason for circuit breaker tripping and rectify the problem. Switch on miniature circuit breaker (fuse) or ground fault circuit interrup‐ ter.
• Switch off other consumers in the same circuit.

Wall outlet’s fuse rating is too low.|

• Insert the connecting cable plug in a wall outlet with the correct fuse rating,     19.1.

Mowing head cannot be unscrewed by hand.| Mowing head overtightened.|

•   Block the fanwheel with the stop pin.
• Unscrew mowing head by hand.
• Remove stop pin.

Specifications

STIHL FSE 52 Trimmer

• Supply voltage: 220-240 V
• Frequency: 50/60 Hz
• Rated current: 2.3 A
• Fuse: 10 A
• Power consumption: 500 W
• Rated speed under load: 6000 rpm Weight with deflector ad cutting attachment
• Version with 0.3 m cable: 2.2 kg
• Version with 9.9 m cable: 2.8 kg
• Electrical protection class: II

Extension Cords

If an extension cord is used, it must have a ground wire and the wire gage of its conductors must meet the following minimum requirements –depending on the line voltage and length of the extension cord:
If rated voltage on the rating label is 220V to 240V:

• Cord length up to 20 m: AWG 15 / 1.5 mm²
• Cord length 20 m up to 50 m: AWG 13 / 2.5 mm²

If rated voltage on the rating label is 100 V to 127 V:

• Cord length up to 10 m: AWG 14 / 2.0 mm²
• Cord length 10 m up to 30 m: AWG 12 / 3.5 mm²

Noise and Vibration Data

K-value (uncertainty) for sound pressure levels is 2 dB(A). K-value (uncertainty) for sound power levels is 2 dB(A). K-value (uncertainty) for vibra‐tion levels is 2 m/s².
STIHL recommends that you wear hearing pro‐tection.

• Sound pressure level LpA measured according to EN 50636-2-91: 83 dB(A)
• Sound power level LwA measured according to EN 50636-2-91: 94 dB(A)
• Vibration level ahv measured according to EN 50636291
• Control handle: < 4.5 m/s²
• Loop handle: 3.0 m/s²

The vibration values quoted above have been measured according to a standardized test pro‐cedure and may be used to compare electric power tools. Depending on the type of usage, the vibrations that actually occur may differ from the values quoted. The vibration values quoted may be used for an initial assessment of the user’s exposure to vibrations. The actual expo‐sure to vibrations has to be estimated. This proc‐ess may also take into account times during which the electric power tool is switched off and times during which it is switched on but running off load.

For information on compliance with Vibration Directive 2002/44/EC visit www.stihl.com/vib.
REACH
REACH is an EC regulation and stands for the Registration, Evaluation, Authorisation and Restriction of Chemical substances.
For information on compliance with the REACH regulation see www.stihl.com/reach.

Combinations of Cutting

STIHL FSE 52 Trimmer

Trimmer with fanwheel
The following mowing heads may be mounted with the deflector:

• with round, low-noise trimmer line with a diameter of 1.6 mm or 2.0 mm
  Trimmer without fanwheel

• AutoCut 2-2 mowing head cannot be installed by the user.

• Have the required mowing head installed by a STIHL servicing dealer.

Spare Parts and Accesso‐ries

Spare parts and accessories

These symbols indicate original STIHL spare parts and original STIHL accesosories.

STIHL recommends the use of original STIHL spare parts and accessories.
Despite ongoing market observation, STIHL is unable to judge the reliability, safety and suitabil‐ity of other manufacturers’ spare parts and accessories; accordingly, STIHL cannot warrant for the use of those parts.
Original STIHL spare parts and original STIHL accessories are available from STIHL dealers.

Disposal

Disposing of Brushcutter

Contact the local authorities or your STIHL dealer for information on disposal.
0458-777-9621-B

Improper disposal can be harmful to health and pollute the environment.

•  Take STIHL products including packaging to a suitable collection point for recycling in accord‐ance with local regulations.
• Do not dispose with domestic waste.

EC Declaration of Con‐formilty

23.1 STIHL FSE 52 Brushcutter
ANDREAS STIHL AG & Co. KG Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that

• Designation: Electric brush cutter
• Manufacturer’s brand: STIHL
• Series: FSE 52
• Serial number: 4816

conforms to the relevant provisions of Directives 2011/65/EU, 2006/42/EC, 2014/30/EU and 2000/14/EC and has been developed and manufactured in compliance with the following standards in the versions valid on the date of production: EN 55014‑1, EN 55014‑2, EN 60335‑1 and EN ISO 12100 taking EN 50636‑2‑91 into account.
The measured and guaranteed sound power lev‐els were determined according to Directive 2000/14/EC, Annex VI.

• Measured sound power level: 94 dB(A)
• Guaranteed sound power level: 96 dB(A)
• The technical documents are stored at ANDREAS STIHL AG & Co. KG Produktzulas‐sung.
  The year of manufacture, country of manufacture and serial number are specified on the rating plate of the brushcutter.
  Waiblingen, 15.07.2021
  ANDREAS STIHL AG & Co. KG

References

• Country Routing Page: Welcome to STIHL | STIHL
• Information on Physical Agents Directive Vibration | STIHL | STIHL
• Country Routing Page: Welcome to STIHL | STIHL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>