ANKER A83A2 Dual 4K HDMI 364 USB C Hub User Manual

: June 9, 2024
: Anker

Table of Contents

ANKER A83A2 Dual 4K HDMI 364 USB C Hub
At a Glance
Specifications
Important Safety Instructions
Declaration of Conformity
GB Declaration of Conformity
FCC Statement
HIGH DEFINITION MULTIMEDIA INTERFACE
Customer Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANKER A83A2 Dual 4K HDMI 364 USB C Hub

At a Glance

ANKER A83A2 Dual 4K HDMI 364 USB C Hub 1

Item	Description
1. USB-C Port (Connects to Host)	Connects to a laptop.

2. Power Indicator

| Turns white when connected to a laptop.

Flashes white once every second when upgrading firmware.

3. USB-A 3.2 Gen 1 Port| 5 Gbps data transfer.
4. USB-C 3.2 Gen 1 Port| 5 Gbps data transfer.

5. SD

| • UHS-I, 104 MB/s.

• The SD 3.0 card slot lets you insert an SD 3.0 card to copy files to and from your device.

6. PD-IN

| • Connect to a Power Delivery charger to charge a connected laptop or tablet.

• Supports up to 100W input.

7. Ethernet Port| Connect to a router or modem at 10/100/1000 Mbps.
8. HDMI Port| Up to 4K@60Hz output to a single display when connected to a laptop.

Specifications

Data Speed: 5 Gbps
HDMI:
- Single Display:
- Up to 4K@60Hz
- 4K (60Hz)
- Dual Display
- Up to 4K@30Hz
- 4K (30Hz)
Supported Systems: Windows 10/11, macOS 10.14 and above
OS: Windows 10/11、macOS 10.14

Important Safety Instructions

Avoid dropping
Do not disassemble
Do not expose to liquids.
For the safest and fastest charge, use original or certified cables
This product is suitable for moderate climates only
The maximum ambient temperature when using this product must not exceed 104°F / 40°C.
Open flame sources, such as candles, must not be placed near this product.
Only use a dry cloth or brush to clean this product.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product is in compliance with Directives 2014/30/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com. Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong The following importer is the responsible party contract for EU matters: Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany

GB Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product is in compliance with the following Directives: The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & Electromagnetic Compatibility Regulations 2016 The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com. The following importer is the responsible party contract for UK matters: Anker Technology (UK) Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. The following importer is the responsible party contract for FCC matters: Company Name: Fantasia

Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1-800-988-7973

IC Statement
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (

This device may not cause interference, and
This device must accept any interference, including interference that may cause undesired operation of the device.

This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

HIGH DEFINITION MULTIMEDIA INTERFACE

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.