DOMUS NEO-10-SM-TILT Surface Mount Tiltable LED Dimmable Downlight Instruction Manual
- June 9, 2024
- DOMUS
Table of Contents
DOMUS NEO-10-SM-TILT Surface Mount Tiltable LED Dimmable Downlight
Instruction Manual
Introduction
Thank you for purchasing your new LED NEO-10-SM-TILT, Please take the time to
read and understand the instruction sheet below.
Failure to do so may void warranty.
NEO-10-SM-TILT
Variants
Blk| Wht| Item No.| Colour Temp
21294| 21298| NEO-10-SM-TILT| TRIO
Specifications
Voltage| 240V| Lumen (±5%):| Warm White 3000K – 880lm
Neutral White 4000K – 960lm White 5000K – 945lm| Dimmable| Yes
---|---|---|---|---|---
Power| 10W| Beam Angle:| 60°| Operating Temp:| -20°C~45°C
P Rating:| IP20| CCT| 3000K – 4000K – 5000K (Switchable| Power Factor| 0.85
CRI:| ≥80| Lifespan| 50,000hrs| |
Assembly Instruction
-
Step 1: Take out the fixtures and fitting from the carton.
-
Step 2: Loosen the screws on surface mounted frame.
-
Step 3: Hammer the anchors into the ceiling according to the hole distance
-
Step 4: Fix the frame to the ceiling with screws provided.
-
Step 5: Fix the “L””N”“G” into the terminal block.
-
Step 6: Screw back the lamp to the frame according to step 2, adjust the lighting direction.
Note:
- The lamp must be installed by professional electrician
- Ensure the power supply is switched off before fitting this product
- Do not touch the lamp when in use
- Keep away from hot steam and corrosive gas
CUSTOMER SUPPORT
29-31 Richland St. Kings grove. Sydney NSW 2208 Australia
Phone: 02 9554 9600 | Fax: 02 9554 9433
enquiries@domuslighting.com |
www.domuslighting.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>