ANKER 523 Nano 3 47W Charger User Manual

ANKER 523 Nano 3 47W Charger

INSTALLATION INSTRUCTION

Attention

• Read all the instructions before using the product.
• The product is designed for use with IT equipment only.
• Naked flame sources, such as candles, must not be placed on the product.
• The disconnection from line voltage is made by an AC plug.
• In case of broken plugs, the product must be disposed of.
• If you want to clean the product, only use a dry cloth or brush.
• The socket outlet shall be installed near the equipment and shall be easily accessible.
• The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of)

Connection

FCC Statement

• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

• This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

• The following importer is the responsible party (for FCC matters only).

• Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764

• Telephone: +1 (800) 988 79733

• This device complies with Industry Canada license-ICES-003.

Operation is subject to the following two conditions:

• This device may not cause interference, and
• This device must accept any interference, including interference that may cause undesired operation of the device.

IC Statement

• This digital apparatus complies with CAN ICES-003(B)/NMB003(B).

Declaration of Conformity

• Hereby, Anker Innovations Limited declares that this product is in compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC & 2019/1782/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com.
• Hereby, Anker Innovations Limited declares that this product is in compliance with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility
• Regulations 2016 & The Restriction of the Use of Certain
• Hazardous Substances in Electrical and Electronic Equipment
• Regulations 2012 & The Ecodesign for Energy-Related
• Products Regulations 2010. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com.

Specifications

• Input
  • 100-240V~ 1.4A 50-60Hz
• Output
  • Use One Port
  • USB-C1 or USB-C2 Output
  • 5V 3A/ 9V 3A/ 11V 4A/ 15V 3A/ 20V 2.25A (45W Max Use Two Ports Output 27W(C1) + 20W(C2) (47W Max)
  • Total Output 47W Max
• Average Active Efficiency
  • 89.00%
• Efficiency at Low Load (10%)
  • 77.69%
• No-Load Power Consumption
  • Recommended Operating Temperature
• 0-25℃ /32-77 ℉

Note: To ensure electrical safety and product performance, the output power may fluctuate based on the ActiveShield™ 2.0* safety mechanism when the ambient temperature is between 26-35℃ （78.8-95℉）with a high output load.

• ActiveShield™ 2.0 enhances protection by intelligent monitoring temperature and adjusting power output to safeguard your connected devices

Customer Service

• 18-month limited warranty
• Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
• Lifetime technical support
• support@anker.com
• support.mea@anker.com (For Middle East and Africa Only)
• (US/CA) +1 (800)988 7973
• (UK) +44 (0) 1604 936200
• (DE) +49 (0) 69 9579 7960
• (Middle East & Africa) +971 42428633
• (UAE) +971 8000320817
• (KSA) +966 8008500030
• (Kuwait) +965 22069086
• (Egypt) +20 8000000826
• (AU) +61 3 8331 4800
• (TR) +90 0850 460 14 14
• (RU) +8 (800) 511-86-23
• (India) +91 18003138831
• +86 400 0550 036
• 0344557823
• +82 02-1670-7098
• For FAQs and more information, please visit: anker.com/support

Indoor use only

• This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
• Anker Innovations Limited
• Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
• Kowloon, Hong Kong
• The following importer is the responsible party (contract for EU and UK matters)
• Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany
• Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>