anko 43115051 12 Inch RGB Ring Light Remote Control Instruction Manual

12″ RGB RING LIGHT WITH REMOTE CONTROL
INSTRUCTION MANUAL

includes:

• 12″ RGB ring light
• Remote control
• Universal smart phone holder
• Tripod stand
• 360° ball head mounting bracket
• Mini microphone

Installation Method:

1. Take the tripod stand 0 from box. Pull out the fixed feet. Adjust tripod height, turn fixed handle clockwise to lock it. (as shown image 1)

2. Take out 0 and (4) from the packing box, turn ® clockwise to the top of IS, and then screw (2) to the top of ® (as shown in image 2)

Mini Microphone Specification:

1. Microphone size: Φ 6.0x5mm microphone core
2. Sensitivity: – 32dB ± 1dB
3. Directivity: omnidirectional
4. Impedance: 2.2k Ω
5. Working voltage: 2.0V
6. Frequency ronge:100Hz-16kHz
7. Signal to noise ratio: greater than 60dB
8. Plug diameter: 3.5mm
9. Length:150cm
10. For use with compatible Mobile Devices. connection via 3.5mm jock

Remote Control Operation:

1. OFF Button – Press once to turn light off.
2. ON Button – Press once to turn light on.
3. UP Button – Press once to increase light by 1 level
4. DOWN Button – Press once to reduce the brightness by 1 level.
5. Red Light – Press once to change Red light.
6. Green Light – Press once to change Green light.
7. Blue Light – Press once to change Blue light.
8. White Light – Press once to change to Natural white/Warm white/Cool white lights.
9. 12 RGB Lights – Press buttons in different colors to chose RGB solid lights
10. FLASH Mode – Press once to change flash mode.
11. STROBE Mode – Press once to change strobe mode.
12. FADE Mode – Press once to change fade mode.
13. SMOOTH Mode – Press once to change smooth mode.

In-line Control Operation:

1. ON/OFF and RGB Button
   Press once to turn light on or off, and change to RGB light.

2. UP Button
   Press once to increase light by 1 level.

3. DOWN Button
   Press once to reduce the brightness by 1 level.

4. ON/OFF and LED Button
   Press once to turn light on or off, and change to Warm/Natural white/Cool light.

Specifications:

Model No:
43115051
Power.
10W
Colours:
13 RGB solid colours + 3 white colours
Power Supply Mode:
USB 5V/2A Product Size: 30cm x 190cm
WARNING:

1. Only qualified service technicians or service agents should attempt to repair this product.
2. The light source contained in this light shall only be replaced by the manufacturer or his service agent or a similar qualified person.
3. The external flexible cable or cord of this light cannot be replaced: If the cord is damaged. the light should not be used.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>