LAMAX X9.2 Action Camera 4K User Guide
- June 9, 2024
- LAMAX
Table of Contents
X9.2 Action Camera 4K User
Guide
X9.2 Action Camera 4K
|
---|---
https://www.lamax-electronics.com/x92/app
https://www.lamax-electronics.com/x92/downloads
BOX CONTENTS
| A | LAMAX X9.2 action camera |
|---|---|
| B | Case, waterproof up to 40 m |
| C | Remote control |
| D | Li-ion battery |
| E | External microphone |
| F | Micro USB cable for charging / file transfer |
| G | Microfibre cloth |
| H | Frame |
| I | Attachments |
GETTING TO KNOW THE CAMERA
A POWER / MODE button
B REC / OK button
C UP button
D DOWN button
E Memory card slot
F Micro USB port
G Video out
H Battery compartment door
Camera controls
| Start / stop recording | Press the REC / OK button |
|---|---|
| Quick menu | Hold the REC / OK button |
| Switch modes | Press the POWER / MODE button |
| Power on / off | Hold down the POWER / MODE button |
| Audio recording on / off | Press the UP button |
| Switch between displays | Hold down the DOWN button |
| Switch WiFi on / off | Press the DOWN button |
USING THE CAMERA FOR THE FIRST TIME
A Connect the camera to the power supply
- Charge the camera either by connecting it to a computer or by using the optional AC adapter.
- Fully charge the battery before first use.
- It takes approximately 4 hours to charge the battery from 0 to 100 %.
- After fully charging, the charging indicator goes out.
- Note: It takes 2.5 hours to charge the battery from 0 to 80 %.
B Insert the microSD card into the camera as shown (connectors towards the lens)
- Insert the card only when the camera is turned off and not connected to the computer.
- Format the card directly in the camera the first time you use it.
- Use branded cards of U3 class and above with a capacity of up to 128 GB.
WIFI APP
A Scan the QR code or enter the URL lamax.cz/x92/app
B Install the app on your smart device.
C Turn on WiFi in the camera by pressing the DOWN button.
D On your smart device, connect to the WiFi network with the camera name. The
WiFi password is shown on the camera display (factory default 1234567890).
FOR MORE INFORMATION
For complete instructions and firmware updates, scan the QR code or go to the URL lamax.cz/x92/downloads
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>