MILANTOAST 420099 Toaster Grill User Manual

MILANTOAST 420099 Toaster Grill

Product Information Toaster Grill Infrarotgrill

The Toaster Grill Infrarotgrill is a high-quality appliance made in Italy by MILANTOAST. It is designed to toast bread, sandwiches, pizza, focaccia, and bruschetta using radiant heat. The device comes with a kippschalter with a Kontrolllampe, zeitschaltuhr, and a removable crumb-/grease tray. It has a power output of 1.09-2.92 Kw, weighs between 4.5-9.5 Kg, and has dimensions ranging from 38x30x31 to 50x30x43 Cm.

Product Usage Instructions

Preliminary Operations

1. Place the device on a suitable work surface in a well-ventilated place.
2. Remove the grill tongs and the grill grate from the grill.

Carefully remove the product from the packaging and keep the original packaging for any return of the product. Remove all plastic, cardboard, any other protective element, accessories must be removed. The adhesive plastic film covering the stainless-steel parts must be removed before putting into operation unit. Remove any adhesive residue with an available stainless-steel cleaner on the market. Data sheet and warnings must not be removed! The packing items should not be left within the reach of children. If the appliance shows signs of damage contact the seller

Important Safety Instructions

Do not touch the hot surfaces of the appliance. The temperature of hot surfaces can be remarkably high when the appliance is working. Always use the handles and control knobs. Before using the device, read the safety instructions carefully and keep the manual for future reference. The safety instructions of this appliance comply with the recognized rules of technology. Nevertheless, we draw your attention to the following safety instructions:

• The infrared grill is only intended for indoor use. Do not use the device outdoors or in damp or wet areas.
• The device is not designed for use at altitudes above 2000 m.
• Only connect the device to a power supply system whose voltage corresponds to the information on the rating plate (on the underside of the device) and which complies with the applicable standards.
• The socket must have a ground contact. If the connection cable of this device is damaged, you must only have it replaced by a specialist in order to avoid hazards. It is recommended to protect the socket with a differential switch with 0.03 A (30 mA).
• It is recommended to connect an equipotential conductor to the M5 terminal located near the entry of the appliance power cable. The terminal is identified with the symbol
• Do not use multiple sockets or extension cables. If the connection cable of this device is damaged, you must only have it replaced by a specialist in order to avoid hazards.
• Never operate this device if it has been dropped or shows visible damage. Have repairs to this device carried out by qualified personnel only. In case of damage, the power cable must be replaced with an original cable by qualified personnel only.
• Make sure that the plug and socket are easily accessible. Once the machine is installed, make sure that the plug and socket are always accessible and the data sheet clearly visible. Any use of the plate for purposes other than those described in this manual is to be considered improper and therefore dangerous. Do not leave the appliance unattended during use. Do not let children or disabled people use it. Do not use outdoors. Do not use in humid environments.
• Do not pull the power cable or the appliance itself to disconnect the plug from the socket. Make sure that the power cord has no contact with the appliance.
• Always pull out the power plug after each use before cleaning and before storing. Never pull the power plug out of the socket by the connection cable. Do not let the connection cable hang down.
• Make sure that the connection cable does not touch the hot device.
• Always place the device centrally on a firm, stable, level, dry and heat-resistant work surface.
• Make sure there is sufficient distance (at least 50 cm) between surrounding objects and the device.
• If the appliance is placed near walls, kitchen furniture, decorative finishes, etc. it is recommended that these are made of suitable and non-combustible materials. The utmost attention must be paid to fire prevention standards. We also recommend keeping the appliance at one minimum distance of 20 cm from the surrounding walls and at a large distance from the ceiling upwards. Do not cover the device: risk of fire!
• Do not place the device on hot surfaces or near open flames. Do not cover the device: risk of fire! Do not operate the device close to flammable, easily inflammable materials. Do not cover the switched on or still warm device with cloths.
• Only use the device with original accessories.
• Always place heat-resistant cookware on the grillage for grilling or gratinating.
• Do not place heavy or hard objects on the device.
• Use the device out of the reach of children. Make sure that children cannot pull the cable and tear off the device and get hurt by it.
• Do not pour any liquids into or over the device! Do not immerse or bathe in water or other liquid. The appliance is not water jet proof and therefore must not be cleaned with this system. Do not cover the appliance as there might be a fire hazard. Disconnect the plug when not in use. Disconnect the plug before moving it. Do not pull on the power cord or the appliance itself to remove the plug from the socket. Keep the power cord from getting in contact with the appliance.
• When starting up the device, high temperatures arise which can lead to burns if touched! Even after being switched off, the device remains very hot for a long period of time.
• Do not grasp the device during operation and not until it has not cooled down. There is a risk of burns!Always use the handles and knobs. Let the device cool down completely before moving it or cleaning it. Before moving the appliance, let it cool down for at least 45 minutes.
• Always keep the device out of the reach of children, in a dry and frost-free place. During use, be careful not to obstruct the ventilation openings of the appliance. Keep adequate space to place the machine. The support surface must be stable and adequately resistant to the heat given off by the appliance and its weight.
• Make other users aware of possible dangers.
• Only use the device for the purposes described in these operating instructions. If the device is used for purposes other than intended or operated incorrectly, no responsibility will be accepted for any damage.
• Do not use if it has been exposed to temperatures below 0 ° C in the last 24 hours.
• Do not clean with a steam cleaner.
• The machine does not produce a sound pressure level> at 70db (A)
• Danger of burns. Do not touch the hot surfaces of the appliance. The temperature of hot surfaces can be remarkably high when the appliance is working. Always use the handles and control knobs. Before moving the appliance, let it cool down. Do not use if it has been exposed to temperatures below 0 ° C in the previous 24 hours.

Device Connection, Usage, and Operation

Insert the power plug into the socket and turn the timer knob clockwise. The indicator lights remain on for the set time. Repeat the sequence described above after a few minutes. Operate the device this way without food and let it cool down between each switch-off and switch-on process. During the execution of these vacuum cycles for the first time, there may be a slight development of smoke, but this is harmless and no longer occurs after the first cleaning. It is the processing residue of the heating element. Professional Toaster Grill. The toaster is intended for toasting bread, sandwiches, Pizza, Focaccia and Bruschetta using radiant heat. Any other use is to be considered improper and therefore dangerous. FIRST IGNITION OR RE-IGNITION AFTER A LONG PERIOD OF INACTIVITY (Reference page 2) Always follow the safety instructions

1. Place the device on a suitable work surface in a well-ventilated place.
2. Remove the grill tongs and the grill grate from the grill.
3. Insert the power plug into the socket
4. Turn the timer knob (2) clockwise.
5. The indicator lights (1) remain on for the set time.
6. Repeat the sequence described above after a few minutes.

Operate the device this way and without food and let it cool down between each switch-off and switch-on process. During the execution of these vacuum cycles for the first time, there may be a slight development of smoke, but this is harmless and no longer occurs after the first cleaning. It is the processing residue of the heating element.

Recommendations for Use

The device is only intended for heating, grilling, and baking toast, bread, pizza, bruschetta, and other food specialties. Place the prepared food in the grill tongs or directly on the grillage. Turn the rotary switch of the timer clockwise to the desired heating duration. For continuous operation, turn the rotary switch of the timer counterclockwise as far as it will go. Then switch on the desired heating element with the respective toggle switch. The lamps of the selected toggle switches light up as soon as the grill is switched on. Note that the maximum thickness of food inserted in the tongs is 6 cm.  Place the prepared food in the grill tongs. To do this, press the tongs handle so that the tongs open and you can put the bread in. Then slide the closed tongs with their contents onto the grillage in the oven. Instead of the tongs, you can also place the food directly on the grillage. First, fold out the handle of the grillage, then place the food on the grill and push everything into the oven.

Turn the rotary switch of the timer clockwise to the desired heating duration. For continuous operation, turn the rotary switch of the timer counterclockwise as far as it will go. Then switch on the desired heating element with the respective toggle switch. The lamps of the selected toggle switches light up as soon as the grill is switched on.
After the set heating time has elapsed, the heating elements are switched off via the expired timer. Now take the tongs or the grillage out of the grill. Always hold the tongs and the grill grate by their handles. The optimal cooking time for the various dishes depends on a number of factors, such as quality, freshness, weight, thickness, consistency, composition and temperature of the food as well as individual preferences. The thinner and more heat-sensitive the food, the lower the necessary grilling temperature and cooking time. Choose a slightly longer heating time when the device is still cold; As soon as the device is heated up, the heating time can be reduced. Occasionally check the cooking condition of the food during the grilling process. The following should also be noted: The best results are achieved with a toast slice and filling at room temperature.

• If you use brown bread instead of white bread, the cooking time should be increased.
• The cooking time should be increased for cold bread.
• The toasting of toast slices and the preparation of panini, piadina and grilled sandwiches make it easier with the grill tongs provided; Of course, sausages and meat, fish or vegetables can be grilled just as well, and the device can also be used excellently for baking pizza and Italian bread specialties or for warming up and keeping food warm. It can even be used as a “salamander” for gratinating, browning and caramelizing dishes.

Warning : this toaster can make the food very hot. Be careful. Turn and remove the grilled food carefully, preferably with grill utensils or a pan lifter, as the grilled food gets very hot.

OVERVIEW

On / Off switch with indicator light

Timer knob

Removable crumb-/grease tray

Thank you for purchasing this high-quality appliance, original MILANTOAST, made in Italy. Please read the instructions carefully before using it. Follow the safety instructions and keep the manual for future reference.

OPERATION

Warning : The maximum thickness of food inserted in the tongs is 6 cm.

• Insert the crumb tray (3)
• Insert the power plug into the power outlet.
• The operation of the device is completely automatic with timer knob.
• Light switches (1) select upper and lower heating elements
• The toaster operates fully automatically, and the toast slots are completely independent of each other, each with its own timer.
• Insert the product into the mouth of the oven.
• Turn the timer knob (2) clockwise to the desired heating time.
• Alternatively, turn the timer knob (2) slightly counterclockwise until it stops in order to keep the device continuously on. This is valid only on models that have a settable time of 15 minutes and the MAN position on the knob.
• The lighting of the indicator lights (1) displays the operating period.
• Once the set heating time has elapsed, remove the food.
• Disconnect the power plug at the end of use.

Warning : Do not put your hands into the Toaster Grill.

CLEANING

Disconnect the power plug before any cleaning operation. Before cleaning the device, pull out the plug and allow it to cool down to a room temperature. Clean the Toaster Grill externally with a damp cloth or specific products for stainless steel. Periodically remove the crumb tray (34) and clean it with a damp cloth or in the dishwasher. Put the crumb tray back in place. It is forbidden to use tools for cleaning the heating elements.

MAINTENANCE

In case of fault, contact the manufacturer. Periodically check the conditions of the following parts: power cable, knobs, tightening screws.

DISPOSAL

The symbol on the device and on the packaging indicates that this device should not be treated like ordinary household waste. Every consumer is legally obliged to dispose of old devices separately from household waste and e.g. be delivered to a collection point in your community / district. This ensures that old devices are properly recycled in order to avoid negative effects on the environment.

WARRANTY

1. The purpose of the warranty is to insure the buyer against any manufacturing defect. The duration is 2 years from the documented purchase date for private use and 1 year for commercial use. During this period, the warranty also covers spare parts and labour. The warranty is at the retailer’s laboratory, therefore, the transport costs that are charged to the customer. Any replaced parts become exclusive property of the retailer.
2. The warranty is valid in all countries of the European Union.
3. The warranty does not cover the necessary interventions:
4. a ) breakage caused by knocks and falls
5. b ) connections to higher electric voltage than the indicated one.
6. c ) normal wear of the appliance.
7. d ) parts damaged by neglect and / or tampering.
8. Under this warranty, the manufacturer cannot be held liable responsible for material damage or accidents to people, resulting from an installation that does not comply with safety standards in force and for:
9. a ) faulty power socket, absence of earth connection, etc.
10. b ) unsuitability of the product for the use for which the buyer intends to use it.

DECLARATION OF CONFORMITY

MILANTOAST, given the positive outcome of the test and inspection reports, declares under its own responsibility that the Products TOASTER GRILL MILANTOAST identified with the codes 14701, 1400x, 1405x, 14071, 1290x comply with following Directives: 2014/35/UE (LVD), 2014/30/UE (EMC), 1935/2004 (FOOD CONTACT), DM 21/03/1973 (FOOD CONTACT) They also comply with following standards: 2011/65/CE (RoHS). It is also declared that these products do not contain asbestos and / or mercury elements.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>