MILANTOAST 420.042 Bread Toaster User Manual
- June 9, 2024
- MILANTOAST
Table of Contents
420.042 Bread Toaster
User Manual BREAD
TOASTER
model: 420.042 – 420.044
420.042 Bread Toaster
CODE
POWER | Kw |
---|---|
WEIGHT | Kg |
DIMENSIONS W x D x H | Cm |
720X | 7240 |
--- | --- |
1,37 | 2,74 |
4 | 7,5 |
18x30x22 | 37x30x22 |
1 | Slots with Heating chambers |
---|---|
2 | Breadlift |
3 | On / Off switch with indicator light |
4 | Removable crumb tray |
5 | Timer knob |
TOASTER
SLICE TOASTER
Thank you for purchasing this high-quality appliance, original MILANTOAST, made in Italy. Please read the instructions carefully before using it. Follow the safety instructions and keep the manual for future reference.
PRELIMINARY OPERATIONS
Carefully remove the product from the packaging and keep the original
packaging for any return of the product.
Remove all plastic, cardboard, any other protective element, accessories must
be removed.
The adhesive plastic film covering the stainless-steel parts must be removed
before putting into operation unit.
Remove any adhesive residue with an available stainless-steel cleaner on the
market.
Data sheet and warnings must not be removed! The packing items should not be
left within the reach of children. If the appliance shows signs of damage
contact the seller.
IMPORTANT SAFETY INSTRUCTIONS
The safety instructions of this appliance comply with the recognized rules of technology. Nevertheless, we draw your attention to the following safety instructions:
- The device is not designed to be used in an altitude above 2000 m.
- It is not suitable for use in commercial kitchens in hotels, restaurants, and canteens.
- This appliance is intended for use in commercial applications such as bars, etc., but not for continuous series production of food.
- Do not clean with a steam cleaner.
- The machine does not produce a sound pressure level> at 70db (A)
- Connect the device only to a power source whose voltage corresponds to the information on the nameplate and complies with the applicable standards. Make sure that the supply voltage of the distribution network corresponds to that indicated on the appliance plate. The plate is located on the side of the appliance. Make sure that the power outlet is equipped with earth contact and that the electrical system follows current regulations.
- In case of incompatibility between the socket and plug of the appliance, have the socket replaced with another of a suitable type by professionally qualified personnel. Single or multiple extension cords and adapters are not recommended. It is possible to avoid its use by choosing only adapters or extensions compliant with current safety standards, without exceeding the load limits indicated.
- It is recommended that the power outlet is protected by a 0.03 A (30mA) differential switch.
- If the appliance is placed near walls, kitchen furniture, decorative finishes, etc. it is recommended that these are made of suitable and non-combustible materials. The utmost attention must be paid to fire prevention standards. We also recommend keeping the appliance at one minimum distance of 20 cm from the surrounding walls and at a large distance from the ceiling upwards. Do not cover the device: risk of fire!
- During use, be careful not to obstruct the ventilation openings of the appliance. In the event of damage, the power cable must be replaced with an original cable. Keep adequate space to place the machine. The support surface must be stable and adequately resistant to the heat given off by the appliance and its weight.
- Once the appliance is installed, make sure that the plug is always accessible and the data sheet clearly visible. Any use of the plate for purposes other than those described in this manual is to be considered improper and therefore dangerous. Do not leave the appliance unattended during use. Do not let children or disabled people use it. Do not use outdoors. Do not use in humid environments.
- Do not immerse or bathe in water or other liquid. The appliance is not water jet proof and therefore must not be cleaned with this system. Do not cover the appliance as there might be a fire hazard. Disconnect the plug when not in use. Disconnect the plug before moving it. Do not pull on the power cord or the appliance itself to remove the plug from the socket. Keep the power cord from getting in contact with the appliance.
- Before moving the appliance, let it cool down for at least 45 minutes.
- Do not pull the power cable or the appliance itself to disconnect the plug from the socket. Make sure that the power cord has no contact with the appliance.
- Do not leave the appliance unattended during use. Do not use outdoors. Do not let children use it unattended. Make sure children do not pull on the cord and cannot break the device or be crushed by it. Also inform other users about possible dangers.
- Do not use in humid environments. Do not place the device on hot surfaces or near flames. Always keep the device in a dry and frost-free place.
- Danger of burns ****. Do not touch the hot surfaces of the appliance. The temperature of hot surfaces can be remarkably high when the appliance is working. Always use the handles and control knobs. Before moving the appliance, let it cool down. Do not use if it has been exposed to temperatures below 0 ° C in the previous 24 hours.
DEVICE CONNECTION, USAGE AND OPERATION
Slice Toaster for commercial use only. The toaster is intended for toasting one or more slices of bread using radiant heat. Any other use is to be considered improper and therefore dangerous.
FIRST IGNITION OR RE-IGNITION AFTER A LONG PERIOD OF INACTIVITY (Reference page 2)
- Carry out the operations in a ventilated room
- Insert the power plug into the socket
- Turn the timer knob (5) of the timers clockwise
- Select the switches (3) in position “ON”
- The indicator lights (3) should stay on for about 4 minutes
- Repeat the sequence described above after a few minutes
- During the execution of these vacuum cycles, white smoke might come out of the ovens.
- It is the processing residue of the heating element.
OPERATION
Attention: The maximum thickness of bread slices is 2 cm.
The minimum size of the slice of bread is 8×8 cm while the maximum is 14×14
cm.
- Insert the crumb tray (4).
- Insert the power plug into the power outlet.
- The toaster works then automatically, and the slots are completely independent of each other, each one with its own timer.
- Insert the slices of bread in the slot (1).
- Turn the timer knob (5) of the timer clockwise to the desired heating time.
- Select the slot you want to use using the light switch. The left switch selects the oven on the left, while the right switch selects the oven on the right.
- The lighting of the indicator light (3) displays the operating period.
- Once the set heating time has elapsed, remove the slice of bread by lowering the bread lift (2).
- Disconnect the power plug at the end of use.
Warning: Do not put your hands into the slot.
RECOMMENDATIONS FOR USE
Always follow the requirements for safe use (CAP 2)
Different types of bread may require different browning levels: The time
required to obtain the right toasting level depends on many different
variables such as bread thickness, type, dimensions, quality, and temperature.
For information purposes only, the toasting time for a slice of white bread
(size 10×10 cm, room temperature) can be set with the timer to less than two
minutes.
It is then recommended to establish the ideal cooking time for your needs
through subsequent tests.
It should also be noted that:
- The best results are obtained by using bread at room temperature.
- If you use black bread instead of white bread, you need to increase the cooking time.
- When the toaster is cold, the cooking time must be increased.
- If you are using hand-cut bread, please try to cut slices as evenly as possible. Uneven slices will toast unevenly.
- Do not use slices of bread that are very thin or broken as they may burn.
- Food cooked with this toaster can be extremely hot. Handle it carefully.
CLEANING
Always follow the safety instructions!
Before cleaning the device, pull out the plug and allow it to cool down to a
room temperature.
Clean the 2-slice toaster (7200) externally with a damp cloth or specific
products for stainless steel.
Periodically remove the crumb tray (4) and clean it with a damp cloth or in
the dishwasher.
Put the crumb tray back in place.
It is forbidden to use tools for cleaning the heating elements.
MAINTENANCE
In case of fault, contact the manufacturer.
Periodically check the conditions of the following parts: power cable, knobs,
tightening screws.
Only original spare parts can be used.
DISPOSAL
The symbol on the device and on the packaging indicates that this device should not be treated like ordinary household waste. Every consumer is legally obliged to dispose of old devices separately from household waste and e.g. be delivered to a collection point in your community / district. This ensures that old devices are properly recycled in order to avoid negative effects on the environment.
WARRANTY
-
The purpose of the warranty is to insure the buyer against any manufacturing defect. The duration is 2 years from the documented purchase date for private use and 1 year for commercial use. During this period, the warranty also covers spare parts and labour. The warranty is at the retailer’s laboratory, therefore, the transport costs that are charged to the customer. Any replaced parts become exclusive property of the retailer.
-
The warranty is valid in all countries of the European Union.
-
The warranty does not cover the necessary interventions:
a. breakage caused by knocks and falls
b. connections to higher electric voltage than the indicated one.
c. normal wear of the appliance.
d. parts damaged by neglect and / or tampering. -
Under this warranty, the manufacturer cannot be held liable responsible for material damage or accidents to people, resulting from an installation that does not comply with safety standards in force and for:
a. faulty power socket, absence of earth connection, etc.
b. unsuitability of the product for the use for which the buyer intends to use it.
DECLARATION OF CONFORMITY
MILANTOAST, given the positive outcome of the test and inspection reports,
declares under its own responsibility that the Product 2 SLICE TOASTER
MILANTOAST identified with the code 7200 comply with the following
Directives:
2014/35/UE (LVD), 2014/30/UE (EMC), 1935/2004 (FOOD CONTACT), DM 21/03/1973
(FOOD CONTACT)
They also comply with the following standards: 2011/65/CE (RoHS).
It is also declared that these products do not contain asbestos and / or
mercury elements.