MILANTOAST 18001 Conveyor Toaster Instruction Manual

June 5, 2024
MILANTOAST

MILANTOAST - logo Tostapane rotativo – Conveyor toaster

18001 Conveyor Toaster

Instructions for use

Thank you for purchasing this quality product please read these instructions carefully before use

1 Lighting switch
2 Speed control
3  Crumb collector
4 load-up area
5  unloading chut
7  top heating control
8  bottom heating control

18051(2,1 kW) 18061(3 kW)

1 Lighting switch
2 Speed control
3  Crumb collector
4 load-up area
5 unloading chut
7  top heating control
8 bottom heating control

18021(2,1 kW) 18031(3 kW)

1 Lighting switch
2 Speed control
3  Crumb collector
4  load-up area
5 unloading chut
6  toast -bun switch /toast

PRELIMINARY RECOMMENDATIONS

Unpack the appliance carefully. Keep and use the original packing in case you return the product to the retailer. Remove plastic, cardboard, and various protective materials and other accessories. Remove the adhesive plastic film protecting the stainless steel parts before switching the appliance on. ln case of a damaged unit please contact the retailer before use. Children should be kept away from packing material (foam polystyrene, plastic bags, dips, etc.), as it may be very dangerous for them to play with

SAFETY STANDARDS :

Check that the supply voltage of the grid corresponds to the one marked on the rating plate under the appliance, which must be earthed and whose circuit must be in compliance with the applicable safety standards. In case the power socket and the plug of the appliance do not correspond, let the socket be removed and changed by an authorized person only. In case you dispose of the appliance near walls and partition walls, kitchen furniture. decorative elements, etc., should be made of fire-resistant material in compliance with fire prevention standards. Keep a minimum distance of 25 cm from surrounding elements and 50 cm from the top. In case of damage, the power cord should be removed and replaced by an original one from trained personnel only. Use original parts and accessories only. Do not leave the working appliance unattended. Keep children and unauthorized people away from the appliance. Do not use it outdoors and do not expose it to dampness. Do not soak it in water or any other liquid or sprinkle it. Avoid cleaning the appliance with liquids, as it is not waterproof. Do not cover the appliance: otherwise, risk of fire. Disconnect the plug when the appliance is switched off. Disconnect the plug before moving the appliance. Do not tear the power cord or the appliance to disconnect the plug from the power socket. Avoid any contact between the power cord and the appliance. Do not place anything on top of the toaster. Risk of bum. Let the appliance cool off for about 45 minutes before moving it.

USING YOUR TOASTER :

This conveyor toaster is ideal to toast bread slices and bagels with radiant heat. The toasting of coated products such as garlic bread and cheese sandwiches is not recommended. Any other use of the appliance is improper and dangerous.

First Use or Reuse of the Appliance after a long Period of Idleness

  1. Use the appliance in airy spots.
  2. Check the position of the crumb tray (3) and toast collector (5).
  3. Connect the power plug with the socket.
  4. Turn the lighting switches on (1).
  5. Set speed (2).
  6. Set-top heating (7)and bottom heating (8)
  7. Leave it working for about 40 minutes before loading.

How to Use Your Conveyor Toaster

  1. Check the position of the crumb tray (3) and toast collector (5).
  2. Connect the power plug with the socket.
  3. Turn the lighting switches on (1).
  4. Set speed (2),
  5. Set-top heating (7), and bottom heating (8).
  6. Load up.

Warning: The dimension of bread to be put in the heating chamber should not exceed: 14x 14 cm (MAX), 4×4 cm (MIN), and 5 cm (4,5 cm for mod 18001) thickness.
The time needed to reach the right bread and food cooking point depends on several factors: quality, freshness, thickness, the shape of food, and its stuffing. Find the right cooking as a result of tests, also considering that:
– when the appliance is cold, cooking time should be increased;
– food cooked in this appliance can be very hot
– handle with care. Loading bread slices:
– model 18001: put bread slices on the conveyor belt in load up area (4)
– models 18021/18031/ 18051 and 18061: the conveyor feeder guide can be used in two positions.


I) when in the upright position, the toaster is set for the automatic feed. Bread slices enter the toaster simply by placing them on the feeder guide (4)
II) for manual feeding of bread, tip the feeder guide until it rests on top of the toaster. In this position, slices can be manualy loaded by placing them directly on the conveyor belt.
Output/discharge of bread slices:
model 18001: output on the rear of the toaster, by crumb tray(5), opposite the loading area. models 18021/18031/ 18051 and 18061: bread discharges at the front of the unit.

Conveyor toaster – Recommendations for use
Allow approximately 15 minutes for the toaster to warm up.
Parameters of the belt (2) speed and energy of top (7) and bottom (8) heating elements can be easily changed. To diminish roll knobs left; to increase roll knobs right. Find an ideal setting and take note.
For models 18021 and 31 belt speed is adjustable. The working mode has to be selected by the right lighting switch (6): toast (upper and lower heating) or bun (lower heating only).
Only for model 18001 remember to place a dish or a tray by the output area to collect toasted bread slices.
The cooling system of the appliance keeps most of the external surfaces of the appliance warm, with no burning risks.
Avoid blocking cool air flow gates on the rear and bottom of the unit. The belt and elements next to the baking chamber are anyway very hot. At the switching off of the appliance (and cooling system) the temperature of the cover raises for about 10 minutes. Place the appliance on a steady surface.
Models 18501 and 18061 have a cover that prevents changing settings by the final user.
Remove the cover, set the appliance, and replace the cover (as in the figure).
CLEANING: Disconnect the power plug before cleaning the appliance. Let the appliance cool off before cleaning or moving it. Clean the appliances externally with a damp cloth or special products for stainless steel. Take the crumb tray periodically out (3) and clean it with a damp cloth. For models 18021/18031/ 18051 and 18061, the toast crumb tray can be easily removed by sliding it out from the front of the unit. On the toaster mod 18001, it’s on the back of the unit and can be removed after taking off the unloading chut(5).
MAINTENANCE: No parts can be repaired by the user. Your retailer will be able to provide all suitable tooling and equipment to repair this appliance, together with the original spare parts. Check regularly the state of the power cord, moving parts, belt, knobs, securing screw, sleeves, fun, and inner wires. Clean monthly from dust internal parts (fun, pcs)
M I LANTOAST ® is a trademark

GUARANTEE:

  1. This product is guaranteed against manufacturing defects for a period of one year from the date of purchase – parts, and labor free of charge. As the purchaser and the retailer agreed on this guarantee, this product is carriage forward. The retailer has the exclusive rights of ownership for any replaced part.

  2. This guarantee is valid in all UE Member Countries.

  3. This guarantee does not cover repairs undertaken for: a) breakage due to crashing or falling off the product;
    b)connections to a higher current or voltage than it is indicated; c)normal wear and tear of the product; d)damage of parts due to negligence and/or misuse of the product.

  4. Within the guarantee period, the retailer is not responsable for material damages or accidents due to any installation not in accordance with the safety standards of the country where the product is used, and in particular to: a) damaged plugs, lack of earth connection, etc; b)misuse of the appliance by the purchaser.

DICHIARAZIONE DI CONFORMITA’
DECLARATION OF THE PRODUCER

EGI MILAN TOAST, visto I’esito positivo dei rapporti di prova e di collaudo, dichiara sotto la propria responsabilita the i prodotti Tostapane Rotativo miLANTonst @ identificati con i codici 18001, 18021, 18031, 18051, 18061 sono conformi alle seguenti Direttive: In consideration of the positive results of the tests carded out, EGI MILAN TOAST declares on its own responsability that its Conveyor Toaster MILANTOAST CI, identification code 18001, 18021,18031, 18051, 18061are in accordance with the following Directives: 73/23/CEE, 93/68/CE, 2006/95/CE (LVD), 2004/108/CE (EMC), 2004/40/CE (EMF) 1935/2004 (FOOD CONTACT), DM 21/03/1973 (FOOD CONTACT)
They also comply with European Directives: 2011/65/CE (RoHS), 2002/96/CE (WEEE)

Sulbiate 18 Gennaio 2013

Sole UK Importer / Distributor:

R.H.Hall (Microwave) Ltd – Hallco House,Beacon Court, Pitstone Green Business Park Pitstone, nr Tring – Leighton Buzzard Bedfordshire LU7 9GY Tel 01296 663400 service fax line: 01296 663403 info@rhhall.com

EG I 144 I LANTOAST ®
via delle Industrie, 26 20884 Sulbiate (MB) ITALY
tel +39.039.68.83.332 Fax +39.039.60.22.896
www.milantoast.com info@milantoast.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals