anko 43200016 Solar Powered 500 LED Multi-Coloured String Lights Instruction Manual
- June 9, 2024
- Anko
Table of Contents
anko 43200016 Solar Powered 500 LED Multi-Coloured String Lights
INSTALLATION INSTRUCTIONS
- Assemble the solar panel as shown in the picture.
- A -Solar Panel
- B – Plastic Cylinder
- C -Plastic Spike
- Attach part B on to the back of solar panel A, then attach C to B by pressing firmly.
- Turn the unit on. You will only need to do this once, as the solar panel will turn the lights on and off automatically. Then you can choose the working functions by Mode switch.
- Place entire unit in a sunny position where there is soft ground to enable the spike to be pushed in easily.
Specification
Multi-Coloured LED 5V/80mA Solar Panel 3x AAA Ni-Cd rechargeable battery 1.2V, 300mAh 12 Functions
- Cycle through flashing fast /slow
- Light string on /off
- Steady on
- Full brightness to dim
- Flashing brightness to dim
- Brightness to dim
- Flashing on / off
- Flashing slow to fast
- Flashing full brightness to dim
- Flashing fast to slow
- Cycle through all flash
- Quick flash full bright to dim
IMPORTANT:
- Charge battery for at least 8 hours before first use.
- The solar light panel MUST be placed in a well-lit location for maximum sunlight. Anything that shades the panel will affect the brightness and lighting duration
- Put the switch on the “OFF” position when not in use or in storage.
- Use a damp cloth to clean it when there is a buildup of dust
- and/or dirt on the surface of the solar panel.
Battery Replacement
The battery is non-replaceable. DO NOT attempt to replace it.
Bulb Changing
The light set is constructed with non-replaceable bulbs. DO NOT attempt to replace any of the bulbs in the light set.
WARNING : FOR DECORATION ONLY. THIS IS NOT A TOY. DO NOT ALLOW CHILDREN TO PLAY WITH AND HANDLE LIGHT SETS.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>