anko 43199372 Low Voltage Christmas Lamp Post Instructions
- June 9, 2024
- Anko
Table of Contents
anko 43199372 Low Voltage Christmas Lamp Post
These instructions are for your safety. Please read through them thoroughly before use and retain for future reference.
Before You Start
Decide on an appropriate location for your product (See Installation and
Instruction below).
If you have any doubt about installing this product, consult a qualífied
electrician.
Installation and Instruction
- This lamp post set is suitable for INDOOR USE ONLY.
- Screw in the top pole into the pole of the basin(Figure A), Connect the lights chains’s connector of the top pole and the bottom pole (Figure B),Plug the lead wire plug to the adaptor socket (Figure C).
- The adaptor MUST be installed INDOORS away from weather.
- Do not position or place near heaters or any other direct sources of heat.
- This product is suitable for positioning on surfaces which have normal flammability, e.g. wood, plasterboard, masonry. However, this does not include highly flammable surfaces (e.g.polystyrene, textiles).
- Always position cables and extension leads so that they will not be a hazard to the elderly,pets and children.
- DO NOT position this set where it may become covered by other items e.g.curtains,nets or bedding.
- Ensure the unit(s) is positioned so that you have elnough cable to reach an indoor mains power socket.
Warning
- Do not try to remove these non-replaceable bulbs.
- This product is NOT designed for permanent or long term use.
- Only operate this light set with the supplied adaptor, Model No. JT-DC 4.5V1.35W-E3
- Do not connect this lamp post set electrically to another light set.
- Do not connect this lamp post set to the power supply while it is in the packaging
- If any part of light set or cable is damaged, the light set MUST be discarded.
- This lamp post set is not for room ilumination.
- This product is for use as a decoration only. Not to be used by children as a toy. Keep out of reach of children and pet.
- Always switch off this light set or unplug an adaptor if unattended.
- DO NOT overload power sockets or extension leads.
- DO NOT pierce the cable when securing in place, bend or stand on the twig tree, as this will damage the bulbs or Wiring.
- Please refer to the packing or product rating label for product class, specifications and rating.
LED Bulbs
- This light set is constructed with non-replaceable bulbs. DO NOT attempt to replace any of the bulbs in the light set.
Read User Manual Online (PDF format)
Loading......