scancool KF560 Esta Glass Door Freezer User Manual
- June 9, 2024
- SCANCOOL
Table of Contents
scancool KF560 Esta Glass Door Freezer
OPERATING AND INSTRUCTION MANUAL
Upright Glass Door Merchandisers
This user manual was originally written in English.
Please read the instructions carefully before using.
SAFETY PRECAUTIONS
The purpose of the safety precautions in this manual is to ensure safe and
correct use of the unit to minimize risks that could cause serious damage and
injury to you or others. The safety precautions are divided into WARNINGS and
CAUTIONS. Cases where improper handling of the unit could lead to death or
serious injury are listed under the “WARNING” heading. However, the cases
listed under the “CAUTION” heading could also lead to serious results. To
ensure the safety, adhere strictly to both types of safety precautions.
Text set off by the exclamation mark contains information that should be
strictly adhered to.
After reading the instruction manual in an easily accessible place where the
user(s) of this product can easily find it.
PRECAUTIONS FOR INSTALLATION
Installation should be performed only by the dealer or a qualified expert.
Attempting to install the unit yourself could result in water leakage,
refrigerant leakage, electrical shock, or fire.
Never put flammable or volatile substances into the unit as this could result
in a fire or explosion.
Use a dedicated wall outlet. Do not use ex-tension cords or convenience
receptacles as this could result in electrical shock, over-heating and a fire.
Never splash water directly onto the product or wash with water as short
circuit and electrical leakage could result.
Do not damage, modify, excessively bend, strain, twist or bundle up the power
cord.
Also, placing heavy objects on the power cord or squeezing it in a tight place
could damage it, possibly resulting in electrical shock or fire.
Never use flammable spray cans or leave flammable substances near the unit.
Sparks from electrical switches could result in explosion and fire
The freezer is intended for storage and dis-play of ice and packaged food. Do
not use for other purpose than the intended as this could adversely affect
items placed in the unit.
For indoor use only. Using the unit in a location exposed to rain could result
in electrical leakage and electrical shock.
Install the unit in a location where the floor is sturdy enough to support the
load of the unit, If the floor is not sturdy enough or installation is
incorrectly performed, the unit could tip over and falling shelves and
products could cause personal injury.
Store the unit in a location where it is not exposed to rain. Using a unit
that has been exposed to rain could result in electrical leakage and
electrical shock.
Leave disassembly and disposal of the unit to qualified experts.
Never attempt to insert fingers, sticks, etc. fan is rotating at high speed
inside the out-let. Injury, electrical shock and improper operation could
result.
Never place heavy objects or items containing water on top of the unit.
Objects could fall down and cause injury and spilled water could deteriorate
the insulation of electrical components and result in electrical leakage.
If you find gas leak. Please do not touch. Gas leakage could cause an
explosion as well as a fire and fire injury.
Away from hot air sources, cooling performance is reduced if the unit is
placed near heat sources such as hot plates and stoves and if it is exposed to
direct sunlight.
Should the unit need temporary storage, make sure not to store the unit in a
location where children play and take precautions so that the door cannot be
completely closed. This will minimize the risk that a child be-comes trapped
inside the compartment.
WELL VENTILATED PLACE
Please make more than 10 cm space be-tween freezer and the wall. If there is
no space, cooling capacity can drop down.
Never hang from the door or climb onto the unit. The unit could tip over or
fall and cause material damage or injury.
Grasp the handle when closing the door.
Holding at other positions could result in pinched fingers and Injury.
When disconnecting the power cord plug from the wall outlet, hold at the plug
main body close to the outlet. Pulling the cord could cause wire breakage,
possible result-ing in overheating and fire.
Do not throw items onto the shelves and do not place items more than a total
of 30 kg on each shell. The shelf could fall down, possibly causing Injury.
If installation in a damp location is unavoidable, also Install an electrical
leakage circuit breaker. If no electrical leakage circuit breaker is
installed, electrical shock could result.
Disconnect the power cord plug from the wall outlet before moving the unit and
make sure that the power cord is not damaged during transport. A damaged
power cord could result in electrical shock and/or fire. Do not push hand
against or apply excessive force to glass surfaces as the glass could break
and cause Injury.
Make sure to that the unit does not tip over or fall when it Is moved. A
falling unit could cause serious injury.
Be sure to attach and secure shelves correctly. An improperly attached shelf
could fall down and cause injury.
PLACING ITEMS IN THE SHOWCASE
This showcase employs a forced circulation of cold air in the system. If circulation of cold air is obstructed, the items will not be adequately refrigerated. Pay attention to the following points:
- Do not let items obstruct the cold air in-let and suction outlet,
- Place items so that they do not protrude from the shelves, the gap between the shelves and the door is used for circulation of cold air,
- Place items evenly on all shelves,
- Please do not display goods on the bot-tom, Please put goods on the shelf.
CLEANING
WARNING
To prevent any electrical shock hazards or injury by rotating circulation fan,
always dis-connect the power cord plug from the wall outlet before cleaning.
EXTERIOR AND COOLER COMPARTMENT
Wipe with a soft, dry cloth. If very soiled, wipe with a cloth that has been moistened with a detergent. Then wipe with a cloth that has been dipped in water.
WARNING
WARNING: Do not splash water directly onto the freezer and do not wash
with wa-ter. Short-circuit and electrical shock could result.
Clean the freezer regularly to keep it clean at times.
Never use polishing powder, soap powder, benzene, Oil or hot water as these
will dam-age the painting and Plastic components.
HOW TO CLEAN THE CONDENSER
It is important to regularly clean the condenser coil every 2-3 months. Heavy
buildup of dust on the condenser can lead to reduced cooling efficiency,
increased energy con-sumption and possible compressor damage
To clean the condenser, follow these steps:
- Switch the power off and pull out the power plug.
- Remove the front panel to access the condenser.
- Use a hoover or a soft brush in a vertical motion to clean the condenser.
CHECKS
To ensure the safety, perform the following checks after cleaning.
Is the power cord plug firmly inserted into a dedicated wall outlet? Confirm
that the plug is not abnormally hot.
Check the power cord for cracks and dam-age. Should the slightest irregularity
be ob-served, contact the dealer from whom you purchased this unit or our
customer’s ser-vice.
This marking indicates that this product should not be d is posed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human heaIth from uncontrolled waste disposaI, recycle it
responsibly to promote the sustainable re use of materiaI resources. To return
your used device, please use the return and collection systems or contact
there tailer where the product was pur-chased. They can take this product for
envi-ronmental safe recycling.
How to use
BEFORE USE
Remove shipping package, tape, ate and leave doors open ventilation for a
while.
The unit is cleaned before shipment. How-ever, clean the compartment interior
once after delivery
Please insert power supply plug into the wall outlet.
Allow the unit to operate for about 1 hour to cool the compartment before
placing items in the freezer.
WAIT 5 MINUTES OR MORE BEFORE RE-STARTING
Restarting the unit immediately after it has been turned off may cause fuses
to blow and activate the circuit-breaker, the com-pressor may be overloaded,
and/or other damage may occur.
TEMPERATURE ADJUSTMENT
For glass door freezer, the interior temperature will be kept at -18~-22°C
under+ 25°C ambient temperature.
If the ambient temperature is extremely high or the stuffing food inside is
too much, that might cause the interior temperature a Little bit higher. So,
it would be better to ad-just the digitalis controller by setting a Lower
temperature so as to maintain the right temperature. 0n the opposite, if the
ambient temperature is very low or empty Loaded, or in Is food storage, the
interior temperature might become very cold, and in return cause the
evaporator to ice up; Thus, it would be better to re-adjust the digital
controller by setting a higher tempera-ture.
DRAIN TRAY
Defrosting is performed automatically and drain water is collected in the
drain tray.
Water is in the drain tray is evaporated au-tomatically. In humidity, large
amount of water in the drain tray, so please throw away drain water once a
day.
EFFICIENT USE
Please follow the below instruction, you could save energy.
To prevent cold air from escaping, open and close the door quickly and keep
the door opened for as short a time as possible.
Please install the unit in the place which is well-ventilated.
SHELF HEIGTH ADJUSTMENT
The shelf height can be adjusted.
Arrange the shelves in accordance with the dimensions of the items to be
placed in the freezer.
Checks
In case the unit shows operating problems, check the following prior to calling the authorized service company:
SYMPTOMS
The unit is not operating
- Faulty electrical contact
- Poor electrical powerx
- Thermostat setting II O”
- Verify electrical connections
- Check the power connection and electri-cal outlet
- Change the thermostat setting to a higher number
Not reaching desired temperature
- Unit is exposed to direct sunlight
- Thermostat is not properly adjusted
- Clogger condenser
- Blocked grills
- Door not properly closed
- Products poorly distributed or excess product load
- Relocate the unit to as had ed area
- Adjust the thermostat setting to a higher number
- Review Maintenance instructions Listed in the manual
- Clean the grills of any debris collected
- Check the Leveling of the unit and door seal.
- Redistribute the product load according start instructions
- For Models with electronic temperature controller, indicates E0 or E1
- Unplug the unit from the outlet. lf the error continues, contact an authorized service technician
Water on the floor
- The unit is not properly level
- Friction with other objects
- Drain hose is outside of the drain pan
- Level the unit following the installation instructions
- Move the unit and avoid contact with other objects
- Locate the hose in the drain pan
- Abnormal noises
- The unit is not properly level
- Friction with other objects
- Level the unit following the installation instructions
- Move the unit and avoid contact with other objects
- Locate the hose in the drain pan
WARRANTY & SERVICE
The manufacturer provides a guarantee in accordance with the law of the
customer’s own country of residence starting from the date on which the
appliance is sold to the end user.
The warranty covers elective parts and work manship. The following items are
not covered under warranty:
- Loss of products.
- Damages caused by transportation.
- Damages caused by modifications made by unauthorized individuals.
- Fluorescent Eights, glass parts or plastic component parts.
- Worn out plugs or defective electrical components.
- Maintenance of the unit.
- Normal usages
- Improper uses, e.g. overloading the appliance, use of non-approved accessories
- Use of force, damage caused by external influences
- Damages caused by non-compliance with the user manual, e.g., connection to an unsuitable power supply or non-compliance with the installation instructions
- Partially or completely separated appliances
- Warranty is valid s hawing the purchase receipt.
We offer a professional service network which offers then necessary technical support for your unit.
- WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in struc-ture, clear of obstruction.
- WARNING: Don’t use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- WARNING: Don’t damage the refrigerant circuit.
- WARNING: Don’t use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
- WARNING: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in as ate w ay and understand the hazards involved.
- WARNING: Children shall not play with the appliance.
- WARNING: Cleaning and user maintenance shall not be made by children without supervision.
- WARNING: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- The following warnings only used forth e product with refrigerant R290
- WARNING: Equipment is only allowed to transport and place in the Normal way, during transportation, we need to ensure heat from sun radiation to equipment is not more than
- 60°C, so as to protect refrigeration unit.
- WARNING: Equipment should be installed in a well-ventilated place, avoid Barger thermal radiation. (Prohibit in front of a heater or heating equipment).
- WARNING: For any types of maintenance and well-keeping, need to stop power sup-ply first, and professional personnel required.
- WARNING: R290 discharge is only allowed to operate in we 11-ventilated room or out-door, open flame is prohibit.
- WARNING: LED Light is not allowed to re-place by oneself, but by professional maintenance personnel.
- Lamp type: LED light.
- Energy efficiency level: N/A
- WARNING: Do not store explosive sub-stances such as aerosol cans with a flammable propellant in this appliance.
CE declaration of conformity
This appliance has been manufactured to the strictest standards and
complies with all applicable legislations, Low Voltage Directive (LVD) and
Electromagnetic Compatibility (EMC).
UKCA declaration of conformity
This appliance has been manufactured to the strictest standards and complies
with all applicable legislation.
Access to professional repair, such as internet webpages, addresses, contact details.
Model no: KF 1563 BE
Aftersales service station list:
Address | Scandomestic A/S |
---|---|
Contact Number | 7242 5571 |
Website | Scandomestic.dk |
QR code | 1106595 |
Relevant information for ordering spare parts, directly or through other
channels provided by the manufacturer, importer or authorised representative;|
Scandomestic A/S
The minimum period during which spare parts, necessary for the repair of the
appliance, are available;| 8 years
Instruction on how to find the model information in the product database, as
defined in Regulation (EU) 2019/2019 by means of a weblink that links to the
model information as stored in the product database or a link to the product
database and information on how to find the model identifier on the product.)|
www.scandomestic.dk
Note: The address or contact phone number of the service site is subject to change without prior notice. Please confirm whether the service station is a directly affiliated one of our company when requiring services.
Product information sheet
Model identifier: | KF 560 BE |
---|---|
Supplier’s name or trademark | Scancool |
Use | Display and sale |
--- | --- |
Type of refrigerating appliance with a direct sales function: | 4. Supermarket |
cabinet
Cabinet family code, according to the harmonised standards or other reliable,
accurate and reproducible methods in accordance with Annex IV.| VF4
Product specific parameters
**1. Bevarage coolers***
Total volume (dm3 or L)
| | Ambient conditions for which the appliance is suitable
Warmest temperature (°C)| Relative humidity (%)
|
**2. Ice-cream freezers with (transparent lid/non-transparent lid):***
Net volume, L
|
390
| Ambient conditions for which the appliance is suitable
Temperature range (°C)| Relative humidity range (%)
minimum| maximum| minimum| maximum
| | |
**3. Gelato-sccoping cabinets***
Total Display Area (m2)| | Temperature class|
[Integral/Remote] [horizontal/vertical (other than semi-vertical)/semi-
vertical/combined] supermarket cabinet, roll-in*: [yes/no]:Total Display Area
(m2)| 0,79| Temperature class| L1
---|---|---|---
*5. Refrigerated vending machines, (Scandomestic do not carry this type of
appliance)**
Volume (dm3 or L)
| | Temperature class|
Category|
General source parameters:
Annual energy consumption| 4854| Recommended temperature(s) for optimised food
storage (°C)| -18
EEI| 53,2| Energy efficiency class| E
Light source parameters:
Type of light source| LED
Energy efficiency glass (for the light source)| /
Minimum duration of the guarantee offered by the supplier, (month)| 12
*(Beverage coolers: fill in point 1, ice-cream freezers: fill in point 2, Gelato-scooping cabinet: fill in point 3, supermarket cabinet: fill in point 4, refrigerated vending machines: fill in point 5. If the refrigerating appliance with a direct sales function contains compartments working at different temperatures, or a compartment that can be set to different temperatures, the lines shall be repeated for each compartment or temperature setting):
General product specification:
Parameters| Value| Parameters| Value
Annual energy cons. kWh/a| 4854| Standard annual energy consumption (kWh/a)|
9132,92
Daily Energy Consumption, kWh/24| 13,3| Ambient Conditions| 25
M| 7,5| N| 19,3
Temperature Coefficiency (C)| | Y| 0,79
P| 1,1| |
Climate Class Factor (CC)| | Target Temperature (Tc) (C)| -18
Product information sheet
Model identifier: | KF 1006 BE |
---|---|
Supplier’s name or trademark | Scancool |
Use | Display and sale |
--- | --- |
Type of refrigerating appliance with a direct sales function: | 4. Supermarket |
cabinet
Cabinet family code, according to the harmonised standards or other reliable,
accurate and reproducible methods in accordance with Annex IV.| VF4
Product specific parameters
**1. Bevarage coolers***
Total volume (dm3 or L)
| | Ambient conditions for which the appliance is suitable
Warmest temperature (°C)| Relative humidity (%)
|
**2. Ice-cream freezers with (transparent lid/non-transparent lid):***
Net volume, L
|
702
| Ambient conditions for which the appliance is suitable
Temperature range (°C)| Relative humidity range (%)
minimum| maximum| minimum| maximum
| | |
**3. Gelato-sccoping cabinets***
Total Display Area (m2)| | Temperature class|
[Integral/Remote] [horizontal/vertical (other than semi-vertical)/semi-
vertical/combined] supermarket cabinet, roll-in*: [yes/no]:Total Display Area
(m2)| 1,31| Temperature class| L1
---|---|---|---
*5. Refrigerated vending machines, (Scandomestic do not carry this type of
appliance)**
Volume (dm3 or L)
| | Temperature class|
Category|
General source parameters:
Annual energy consumption| 8884| Recommended temperature(s) for optimised food
storage (°C)| -18
EEI| 67,5| Energy efficiency class| F
Light source parameters:
Type of light source| LED
Energy efficiency glass (for the light source)| /
Minimum duration of the guarantee offered by the supplier, (month)| 12
*(Beverage coolers: fill in point 1, ice-cream freezers: fill in point 2, Gelato-scooping cabinet: fill in point 3, supermarket cabinet: fill in point 4, refrigerated vending machines: fill in point 5. If the refrigerating appliance with a direct sales function contains compartments working at different temperatures, or a compartment that can be set to different temperatures, the lines shall be repeated for each compartment or temperature setting):
General product specification:
Parameters| Value| Parameters| Value
Annual energy cons. kWh/a| 8884| Standard annual energy consumption (kWh/a)|
13162
Daily Energy Consumption, kWh/24| 24,34| Ambient Conditions| 25
M| 7,5| N| 19,3
Temperature Coefficiency (C)| | Y| 1,31
P| 1,1| |
Climate Class Factor (CC)| | Target Temperature (Tc) (C)| -18
Product information sheet
Model identifier: | KF 1563 BE |
---|---|
Supplier’s name or trademark | Scancool |
Use | Display and sale |
--- | --- |
Type of refrigerating appliance with a direct sales function: | 4. Supermarket |
cabinet
Cabinet family code, according to the harmonised standards or other reliable,
accurate and reproducible methods in accordance with Annex IV.| VF4
Product specific parameters
**1. Bevarage coolers***
Total volume (dm3 or L)
| | Ambient conditions for which the appliance is suitable
Warmest temperature (°C)| Relative humidity (%)
|
**2. Ice-cream freezers with (transparent lid/non-transparent lid):***
Net volume, L
|
1090
| Ambient conditions for which the appliance is suitable
Temperature range (°C)| Relative humidity range (%)
minimum| maximum| minimum| maximum
| | |
**3. Gelato-sccoping cabinets***
Total Display Area (m2)| | Temperature class|
[Integral/Remote] [horizontal/vertical (other than semi-vertical)/semi-
vertical/combined] supermarket cabinet, roll-in*: [yes/no]:Total Display Area
(m2)| 2,09| Temperature class| L1
---|---|---|---
*5. Refrigerated vending machines, (Scandomestic do not carry this type of
appliance)**
Volume (dm3 or L)
| | Temperature class|
Category|
General source parameters:
Annual energy consumption| 12840| Recommended temperature(s) for optimised
food storage (°C)| -18
EEI| 66,9| Energy efficiency class| F
Light source parameters:
Type of light source| LED
Energy efficiency glass (for the light source)| /
Minimum duration of the guarantee offered by the supplier, (month)| 12
*(Beverage coolers: fill in point 1, ice-cream freezers: fill in point 2, Gelato-scooping cabinet: fill in point 3, supermarket cabinet: fill in point 4, refrigerated vending machines: fill in point 5. If the refrigerating appliance with a direct sales function contains compartments working at different temperatures, or a compartment that can be set to different temperatures, the lines shall be repeated for each compartment or temperature setting):
General product specification:
Parameters| Value| Parameters| Value
Annual energy cons. kWh/a| 12840| Standard annual energy consumption (kWh/a)|
19206
Daily Energy Consumption, kWh/24| 35,18| Ambient Conditions| 25°C
M| 7,5| N| 19,3
Temperature Coefficiency (C)| | Y| 2,09
P| 1,1| |
Climate Class Factor (CC)| | Target Temperature (Tc) (C)| -18
EU DECLARATION OF CONFORMITY
Name and address of the manufacturer or his authorise
Scandomestic A/S Linåvej 20
8600 Silkeborg Denmark
This declaration of conformity is issued under the sole responsibility of the
manufacturer (or installer):
Scandomestic A/S Linåvej 20
8600 Silkeborg Denmark
References to the relevant harmonised standards used, or references to the
specifications in relation to which conformity is declared:
EN ISO 17050-1: 2004
Additional information:
The appliance is intended for professional use
Object of the declaration
(identification of product allowing traceability. It may include a colour image of sufficient clarity to enable the identification of the product)
Model number (unique identification of the product):| KF 560 BE
Product:| Display Freezer
Brand:| Scancool
Colour:| Black
The object of the declaration described above is in conformity with the
relevant Union harmonisation legislation:
EN 55014-1:2017+A11:2020, EN 55014-2:2015, EN IEC 61000-3-2:2019, EN
61000-3-3:2013+A1:2019, 2014/30/EU, 2019/2018, 2019/2024, EN ISO 23953-1:2015,
EN ISO 23953-2:2015, EN 60335-2-89:2010+A1:2016+A2:2017, EN
60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+ A2:2019, EN 62233:2008,
2006/42/EC, ISO 9001, RoHS, IEC 60335-2-89:2019, IEC 60335-1:2010, COR1:2010,
COR2:2010, AMD1:2013,
COR1:2014, AMD2:2016, COR1:2016, IEC 60335-2-89:2019, IEC
60335-1-2010+A1:2013+A2:2016, AS/NZS 60335.2289:2020, AS/NZS
60335.1:2011+A1:2012+A2:2014+A3:2015+A4:2017+A5:2019, IEC/EN 62471, EN
60335-2:2010+A1:2016+A2:2017, EN 60335-1:2012+
A11:2014+A13:2017+A1:2019+A22019+A14:2019, ISO 9001, ISO 45001, ISO 14001
Name and address of the manufacturer or his authorise
Scandomestic A/S Linåvej 20
8600 Silkeborg Denmark
This declaration of conformity is issued under the sole responsibility of the
manufacturer (or installer):
Scandomestic A/S Linåvej 20
8600 Silkeborg Denmark
References to the relevant harmonised standards used, or references to the
specifications in relation to which conformity is declared:
EN ISO 17050-1: 2004
Additional information:
The appliance is intended for professional use
Object of the declaration
(identification of product allowing traceability. It may include a colour image of sufficient clarity to enable the identification of the product)
Model number (unique identification of the product):| KF 1006 BE
Product:| Display Freezer
Brand:| Scancool
Colour:| Black
The object of the declaration described above is in conformity with the
relevant Union harmonization legislation:
EN 55014-1:2017+A11:2020, EN 55014-2:2015, EN IEC 61000-3-2:2019, EN
61000-3-3:2013+A1:2019, 2014/30/EU, 2019/2018, 2019/2024, EN ISO 23953-1:2015,
EN ISO 23953-2:2015, EN 60335-2-89:2010+A1:2016+A2:2017, EN
60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+ A2:2019, EN 62233:2008,
2006/42/EC, ISO 9001, RoHS, IEC 60335-2-89:2019, IEC 60335-1:2010, COR1:2010,
COR2:2010, AMD1:2013,
COR1:2014, AMD2:2016, COR1:2016, IEC 60335-2-89:2019, IEC
60335-1-2010+A1:2013+A2:2016, AS/NZS 60335.2289:2020, AS/NZS
60335.1:2011+A1:2012+A2:2014+A3:2015+A4:2017+A5:2019, IEC/EN 62471, EN
60335-2:2010+A1:2016+A2:2017, EN 60335-1:2012+
A11:2014+A13:2017+A1:2019+A22019+A14:2019, ISO 9001, ISO 45001, ISO 14001
Name and address of the manufacturer or his authorise
Scandomestic A/S Linåvej 20
8600 Silkeborg Denmark
This declaration of conformity is issued under the sole responsibility of the
manufacturer (or installer):
Scandomestic A/S Linåvej 20
8600 Silkeborg Denmark
References to the relevant harmonised standards used, or references to the
specifications in relation to which conformity is declared:
EN ISO 17050-1: 2004
Additional information:
The appliance is intended for professional use
Object of the declaration
(identification of product allowing traceability. It may include a colour image of sufficient clarity to enable the identification of the product)
Model number (unique identification of the product):| KF 1563 BE
Product:| Display Freezer
Brand:| Scancool
Colour:| Black
The object of the declaration described above is in conformity with the
relevant Union harmonization legislation:
EN 55014-1:2017+A11:2020, EN 55014-2:2015, EN IEC 61000-3-2:2019, EN
61000-3-3:2013+A1:2019, 2014/30/EU, 2019/2018, 2019/2024, EN ISO 23953-1:2015,
EN ISO 23953-2:2015, EN 60335-2-89:2010+A1:2016+A2:2017, EN
60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+ A2:2019, EN 62233:2008,
2006/42/EC, ISO 9001, RoHS, IEC 60335-2-89:2019, IEC 60335-1:2010, COR1:2010,
COR2:2010, AMD1:2013,
COR1:2014, AMD2:2016, COR1:2016, IEC 60335-2-89:2019, IEC
60335-1-2010+A1:2013+A2:2016, AS/NZS 60335.2289:2020, AS/NZS
60335.1:2011+A1:2012+A2:2014+A3:2015+A4:2017+A5:2019, IEC/EN 62471, EN
60335-2:2010+A1:2016+A2:2017, EN 60335-1:2012+
A11:2014+A13:2017+A1:2019+A22019+A14:2019, ISO 9001, ISO 45001, ISO 14001
Scandomestic A/S . Linåvej 20
DK-8600 Silkeborg
Tel.: +45 7242 5571
www.scandomestic.dk