DINAN D180-0016 G29 Z4 Strut Brace Instruction Manual
- June 9, 2024
- DINAN
Table of Contents
DINAN D180-0 016 G29 Z4 Strut Brace
Thank you for being selective enough to choose a Dinan Enhanced Strut Brace
Kit. The Dinan Engineering Team has spent many hours developing this product
to assure that you will receive increased performance, durability and an
aesthetic design that you as a customer will be able to enjoy for many years.
Ease of installation and maintenance is important to us and has been highly
considered throughout the design process. Prior to performing the
installation, familiarize yourself with these instructions as it should help
you with the process. If you feel that you do not have the required skills or
tools, please arrange for a qualified repair facility to perform the
installation. If you have any difficulties during the installation, or if
these instructions are not clear to you, please call Dinna’s Technical Support
Staff at 800-341-5480.
Again, thank you for choosing Dinan. Enjoy
Parts List
- D182-0071- Strut Brace, Left
- D182-0072- Strut Brace, Right
Removal of Stock Braces
- Loosen and remove screws.
- Remove the strut braces. The screws will be re-used.
Installation of Dinan Braces
- Position the left and right brace. The ‘DINAN’ logo shall read left to right when viewing from its respected side of the vehicle.
- Tighten the screws.
- Tightening torque = 56 Nm (41 ft-lb)
Install Instructions: INS180-0016
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>