FOERSTER TECHNIK COMPACT Smart Calf Feeder User Guide
- June 9, 2024
- FOERSTER TECHNIK
Table of Contents
FOERSTER TECHNIK COMPACT Smart Calf Feeder
Basic Check
- Calibration
HINT: A detailed description of the calibration can be found in the Quick Start Guides 1.3 Manual calibration or 1.4 Automatic calibration.
Note: The availability of the individual components varies with the respective equipment of the device.
Last calibration?| Can calibration be run
successfully without errors?
---|---
| Date| Runtime| OK?| Runtime
MP| | | |
Water| | | |
Milk *| | | |
Deterg. 1| | | |
Deterg. 2| | | |
Addit. 1| | | |
Addit. 2| | | |
- = Combi feeders| | | |
Cleaning
Note: Compare the settings and the application recommendations of the detergents used.
Check cleaning settings and detergent supply
Detergent 1/2
Detergent supply OK?
Deterg. 1
Deterg. 2
Check cleaning effect
Functionality check of the mixer electrode
To ensure and maintain the operation of the automatic feeder.
Electrode test OK?
* Point electrode only for VARIO-Feeders!
Electrode test failed? Check the following aspects: OK?
Heat shrink hose over bar electrode intact?
Cable to main board intact?
Plug inside the machine housing intact?
No humidity in the plug?
Connector on the board plugged into the correct socket?
Valve block test
Ensure that the valves connected to the valve block are tight so that the liquid in the mixer can only drain through the valves / connections provided for this purpose.
Check function of training pump
Disconnect suction hose from hose coupling
When the mixer is full and the training pump is activated, no water should
leak through the feed station valves or the drain valve. Water should drain
out of the IFS connections.
Leak test
For detailed information and valid warnings, as well as safety instructions,
please refer to the operating instructions (Status 23/02)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>