FOERSTER TECHNIK 4.1 MilchMobil User Guide

June 5, 2024
FOERSTER TECHNIK

FOERSTER TECHNIK 4.1 MilchMobil

MilchMobil

This document gives you a brief overview about how to Start up a MilchMobil.

Unlock

Operational modes

SET
Setting mode, when the MilchMobil is connected to the mains.

AUTO

Feed mode, when the MilchMobil is disconnected from the mains.

  1. Filling the water bathSlightly tilt the MilchMobilFOERSTER TECHNIK 4.1 MilchMobil fig 3

  2. Plug in & turn on Charge the battery 6-8 hours

  3. Cleaning Once before commissioning & after each feeding
    Attention! First insert the cleaning nozzle loosely into the opening provided, then attach dosing arm to it.

  4. Heating adjustment
    Note: Set frost protection

  5. Calibration
    To ensure that the dosing pump can exactly dose the specified amount of water, you must perform a cali- bration during commissioning. Keep a measuring cup ready for calibration.

  6. Dosing
    3 optionsFOERSTER TECHNIK 4.1 MilchMobil fig 7

This checklist refers to the basic equipment of the MilchMobil. Not all available functions can be shown. For detailed information and valid warnings as well as safety instructions, please refer to the instructions manual. (Status 21/07)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals