Whirlpool HWMB9002GW Front Load Washer Installation Guide

: June 9, 2024
: Whirlpool

HWMB9002GW Front Load Washer

Health & Safety, Use & Care, Installation Guide and Online Warranty Registration Information

Model : HWMB9002GW
www.whirlpool.com.hk www.whirlpool.com.sg

INSTALLATION GUIDE

SAFETY INSTRUCTIONS

This symbol reminds you to read this instruction manual.
Before using the appliance, read these safety instructions.
Keep them nearby for future reference. These instructions and
the appliance itself provide important safety warnings, to
be observed at all times. The manufacturer declines any
liability for failure to observe these safety instructions,
for inappropriate use of the appliance or incorrect setting
of controls.

Very young children (0-3 years) should be kept away
from the appliance. Young children (3-8 years) should be
kept away from the appliance unless continuously supervised.
Children from 8 years old and above and persons with
reduced physical, sensory or mental capabilities or lack
of experience and knowledge can use this appliance only
if they are supervised or have been given instructions on
safe use and understand the hazards involved. Children
must not play with the appliance. Cleaning and user
maintenance must not be carried out by children without
supervision.

WARNING: Never stop a tumble dryer before the end of
the drying cycle unless all items are quickly removed and
spread out so that the heat is dissipated.
Items that have been soiled with substances such as cooking
oil, acetone, alcohol, petrol, kerosene, spot removers,
turpentine, waxes and wax removers and items such
as foam rubber (latex foam), shower caps, waterproof textiles,
rubber-backed articles and clothes or pillows fitted
with foam rubber pads should not be dried in the tumble
dryer. Remove all objects from pockets, such as lighters and
matches. Do not use the tumble dryer if industrial chemicals
have been used to clean it.
Oil-soaked items should not be dried in the tumble
dryer due to their high flammability.
Never open the door forcibly or use it as a step.

PERMITTED USE

CAUTION: The appliance is not intended to be operated
by means of an external switching device, such as a timer,
or separate remote controlled system.
This appliance is intended to be used in household and
similar applications such as: staff kitchen areas in shops,
offices and other working environments; farm houses; by
clients in hotels, motels, bed & breakfast and other residential
environments.
This appliance is not for professional use. Do not use
the appliance outdoors.
Do not store explosive or flammable substances (e.g.
gasoline or aerosol cans) inside or near the appliance – risk
of fire.
Do not load the machine above the maximum capacity
(kg of dry cloth) indicated in the programme table.
Do not dry unwashed items in the tumble dryer.
Take care that no lint or dust has accumulated around
the dryer.

IMPORTANT TO BE READ AND OBSERVED

Fabric softeners, or similar products, should be used as
specified by the fabric softener instructions.
Do not over dry the laundry.

INSTALLATION

The appliance must be handled and installed by two
or more persons – risk of injury. Use protective gloves to
unpack and install – risk of cuts.
Installation, including water supply (if any), electrical
connections and repairs must be carried out by a qualified
technician. Do not repair or replace any part of the
appliance unless specifically stated in the user manual.
Keep children away from the installation site. After unpacking
the appliance, make sure that it has not been damaged
during transport. In the event of problems, contact the
dealer or your nearest After-sales Service. Once installed,
packaging waste (plastic, styrofoam parts etc.) must be
stored out of reach of children – risk of suffocation. The
appliance must be disconnected from the power supply
before any installation operation – risk of electric shock.
During installation, make sure the appliance does not
damage the power cable – risk of fire or electric shock. Only
activate the appliance when the installation has been
completed.
Install the dryer in rooms with adequate ventilation
(open door, ventilation grid or slot larger than 500 cm2) in
order to avoid the backflow of gases into the room from
appliances burning other fuels, including open fires. If
the dryer is installed under a worktop, provide a distance
of 10 mm between the upper panel of the dryer and any
objects above it, and 15 mm between the sides of the
appliance and the walls or furniture units adjacent to it.
If the dryer is installed near to a gas or coal stove, provide
a heat insulating plate (85 cm x 57 cm) in between, as the
side facing the stove is covered with aluminium foil.
Exhaust air must not be discharged into a flue which
is used for discharging fumes from appliances burning gas
or other fuels.
The appliance must not be installed behind a lockable
door, a sliding door or a door with a hinge on the opposite
side to that of the tumble dryer, in such a way that a full
opening of the tumble dryer door is restricted.
The appliance shall be placed against the wall to limit
access to its rear side.
Take care not to use a carpet which obstructs ventilation
openings in the base of the dryer.
If you want to stack the dryer on a washing machine,
first contact our After-Sales Service or your specialist dealer
to verify the complete list of suitable models. The stacking
is only possible if the dryer is attached to the washing
machine by means of the appropriate stacking kit available
through our After- Sales Service or your specialist dealer.
Instructions for the correct assembly are supplied with the
stacking kit.

SAFETY INSTRUCTIONS

ELECTRICAL WARNINGS

It must be possible to disconnect the appliance from
the power supply by unplugging it if plug is accessible, or
by a multi-pole switch installed upstream of the socket in
accordance with the wiring rules and the appliance must
be earthed in conformity with national electrical safety
standards.
Do not use extension leads, multiple sockets or adapters.
The electrical components must not be accessible to the
user after installation. Do not use the appliance when you
are wet or barefoot. Do not operate this appliance if it has a
damaged power cable or plug, if it is not working properly,
or if it has been damaged or dropped.
If the supply cord is damaged, it must be replaced with
an identical one by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard – risk
of electric shock.

CLEANING AND MAINTENANCE

WARNING: Ensure that the appliance is switched off
and disconnected from the power supply before performing
any maintenance operation. To avoid risk of personal injury
use protective gloves (risk of laceration) and safety shoes
(risk of contusion); be sure to handle by two persons (reduce
load); never use steam cleaning equipment (risk of electric
shock).
Non-professional repairs not authorized by the manufacturer
could result in a risk to health and safety, for which the
manufacturer cannot be held liable. Any defect or damage
caused from non- professional repairs or maintenance will
not be covered by the guarantee, the terms of which are
outlined in the document delivered with the unit.
Make sure that all lint traps are cleaned before starting
any drying cycle.

DISPOSAL OF PACKAGING MATERIALS

The packaging material is 100% recyclable and is marked with the recycle
symbol .
The various parts of the packaging must therefore be disposed of responsibly
and in full compliance with local authority regulations governing waste
disposal.

DISPOSAL OF HOUSEHOLD APPLIANCES

This appliance is manufactured with recyclable or reusable materials.
Dispose of it in accordance with local waste disposal regulations. For
further information on the treatment, recovery and recycling of household
electrical appliances, contact your local authority, the collection service
for household waste or the store where you purchased the appliance.
This appliance is marked in compliance with European Directive 2012/19/
EU, Waste Electrical and Electronic Equipment (WEEE) and with the Waste
Electrical and Electronic Equipment regulations 2013 (as amended). By
ensuring this product is disposed of correctly, you will help prevent
negative consequences for the environment and human health.

The symbol on the product or on the accompanying documentation
indicates that it should not be treated as domestic waste but must be
taken to an appropriate collection center for the recycling of electrical
and electronic equipment.

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,
please register your product on
www.whirlpool.com.hk / www.whirlpool.com.sg

Before using the appliance carefully read the Safety Instructions.

CONTROL PANEL

1 Programme selection knob
2 On/Off button
3 Start/Pause button
Options buttons
4 Fresh Care +
5 Cycle End Signal
6 Rapid
7 Cycle Options (hold for Settings)
8 Dryness Level
9 Timed Drying
10 Start Delay

Navigation buttons and Key Lock
11 UP
12 DOWN
13 CONFIRM E4 (hold for Key Lock)

INDICATORS

demo mode

FIRST TIME USE

When starting the appliance the first time, the control panel will
automatically show the set language menu. The UP and DOWN
buttons are used to show the languages available in the
machine. Press the button to confirm. The machine cannot be
used without having selected the language.
Make sure that the water tank is correctly inserted.
The dryer must be installed in a room with a temperature
ranging between 5°C and 35°C to ensure proper operation.
Before using the dryer make sure it has been in an upright
position for at least 6 hours.
Should you wish to change the opening side of the door, please
contact our After-sales Service. (See phone number in the
warranty booklet).

DAILY USE

Doing this will keep your machine working at its BEST:
– remember to empty your water tank after each drying cycle.
– remember to clean your filters after each drying cycle.
Refer to the Care & Maintenance section.

1. Plug the dryer into the power supply socket.
2. Open the door and load garments; always refer to instructions on
clothing labels and the max loads indicated in the programme
section. Empty pockets. Make sure garments do not get caught
between the door and/or the door filter. Do not load items that
are dripping wet. Do not tumble dry large, very bulky items.
3. Close the door.
4. Press the “On/Off” button.
5. Select the most suitable programme for the type of fabric in that
load.
6. Select the options, if necessary.
7. Press the “Start/Pause” button to begin drying.
8. At the end of the drying cycle, a buzzer will beep. An indicator on
the control panel signals the end of the cycle. Pull the load out
immediately to prevent the formation of creases on laundry.
9. Turn the machine off by pressing the “On/Off” button, open the
door and pull the clothing out. If the machine is not switched off
manually, after about a quarter of an hour from the end of the
cycle , the appliance turns off automatically to save energy.
Note that some programme/option accords with “Crease Care”
system. This means that for some hours, after the end of the
drying cycle, the drum rotates at regular intervals to prevent the
formation of creases.
In case of power failure, it is necessary to press the “Start/Pause”
button to restart the cycle.

Eco Monitor

This indicator shows the energy consumption level according to
the programme and the options set. The consumption is
proportional to the lines on the display, by the ecomonitor icon.

OPENING THE DOOR DURING THE CYCLE

Laundry can be checked while the drying cycle runs and any
garments already dry can be removed, while drying continues for
the remaining items. After closing the door, press the “Start/Pause”
button to resume machine operation.
Keep the door closed until the cycle end to save time and energy.

The “UP” and “DOWN” buttons are used to navigate the available
menus.
• Press the button to confirm the selection.
• Press the option button at the symbol, where present on the
display, to return to the previous screen.
If no selection is confirmed, after about 2 minutes, the display
return to the main screen.

SETTINGS

To access the settings menu, keep the relevant button pressed for
some seconds.

Set language shows the available languages on the display.
Sounds allows to enable or disable the sounds (some sounds, as
warnings, will remain active anyway).
Brightness allows to modify the display brightness.
Factory Default allows to reset the default settings. After having
selected the setting, keep the button pressed for some seconds.

CARE LABEL

Always check the care labels, especially when placing garments in
the tumble dryer for the first time. Below are the most commonly
used symbols:

May be tumble dried.
Do not tumble dry.
Tumble dry – high heat.
Tumble dry – low heat.

PROGRAMS

The duration of these programs will depend on the size of the
load, types of textiles, the spin speed used in your washer and
any extra options selected. In machines equipped with display,
the duration of the cycles is shown on the control panel. The
remaining time is constantly checked and adjusted during the
drying cycle to show the best possible estimate.
Option to use – If all your loads on Automatic Cycles are
consistently less dry or more dry than you would like, you may
increase or decrease the dryness level using the specific option.

Eco kg Max*

This is the most efficient programme in terms of energy
consumption and is suitable for drying normal wet cotton
laundry. The values on the Energy Label are based on this
programme.

NOTE: For optimal energy efficiency this cycle by default is set up to
“Cupboard Dry” level. For a higher dryness level we suggest using
the Cotton cycle.

Cotton kg Max*

Cycle suitable for drying all types of cotton, ready to be
placed in the cupboard.

Mixed kg 4

This programme is ideal for drying cotton and synthetic
fabrics together.

Synthetics kg 4

For drying laundry made of synthetic fibres.

Wool kg 1

Programme for drying wool clothes. It is advisable to turn the
items inside out before drying. If heavy edges remain damp, leave
them to dry naturally.

Delicates kg 2

For drying delicate laundry requiring gentle treatment.

Bed Linen kg Max*

This programme is intended for drying cotton sheets.

Duvet

Programme intended to dry bulky items, such as a single duvet.

Easy Ironing

This cycle relaxes fibres, thus making ironing and folding
easier. Suitable for small load of damp or dry cotton and cotton
blend fabrics. Not for wet items.

More Cycles

Microfiber kg 2
Gentle drying for microfiber.

**Towel kg Max***

For drying sturdy cotton laundry, such as terry towels. Tecnhical Wear kg 4

For drying synthetics or cotton technical wear. Down Jackets kg 2

To dry down jackets, restoring their natural softness (2 jackets). Mats kg 3

To dry small bath or kitchen mats. Do not dry mats with plastic parts, as this could cause a fire hazard.

Lingerie kg 2

To dry very delicate underwear. Close all hooks before drying. Cuddly Toys

This cycle preserves the appearance of cuddly toys, keeping them at their best. Remove all accessories before proceeding with drying. Each single piece must not exceed 600 gr.

Mixed Colors kg 3

Programme for the gentle drying of coloured fabrics. Sport kg 4

For drying synthetics or cotton sports garments. Jeans kg 3

For drying sturdy cotton including denim trousers and jackets. Shirts kg 3

This is a programme for cotton or cotton blend/synthetics shirts. Rapid 30’ kg 0.5

Ideal for drying cotton garments spun at high speed in the washing machine.

indicator on the control panel signals the time being selected. Start Delay

This option is for delaying the start of the cycle. Press the corresponding button several times to find the required delay. Once the max time is reached, the option is reset by pressing the button again. An indicator on the control panel signals the time being selected. After pressing the “Start/Pause” button, the machine signals the time remaining to the start of the cycle. If the door is opened, press the “Start/Pause” button once the door has been closed.

FreshCare+

If laundry is left inside of the drum once the cycle has ended, it can be subjected to bacterial proliferation. This option helps to prevent this from happening by controlling the temperature and gently rotating the drum. This will continue for up to 6 hours after the end of the cycle. This setting will remain in the memory of the previous cycle. If this is used alongside Start Delay, a crease treatment will be perfomed during this phase by periodic rotations of the drum.

Rapid

Enables quicker drying.

Key Lock

This option makes all machine controls inaccesible, except the “On/Off” button. When the machine is on:

to activate the option, keep the button pressed until the machines signals that the option has been enabled.
to disable the option, keep the button pressed until the machine signals that the option has been disabled. This option remains in memory if selected in previous drying. Cycle End Signal

This option activates a prolonged buzzer at the end of the cycle. Enable it if you do not think you will hear the normal sound at the end of the cycle. After having pressed the option button, it can be enabled or disabled using the “UP” and “DOWN” buttons. Press the button to confirm.

This option remains in memory, if selected in previous drying. Cycle Option

This button provides access to the menu of options below. Scroll the options with the “UP” and “DOWN” buttons and press the button to confirm the selection.

• Gentle

Enables a more gentle treatment of the laundry by reducing the drying temperature.

• Anti Tangle

This option performs a special drum movement that reduces tangling and knotting of your clothes. It gives best results when used with smaller loads.

CARE AND MAINTENANCE

WARNING: unplug the dryer during the cleaning and
maintenance procedures.

Emptying the water tank after each cycle (see Fig. A).
Pull the container out of the dryer and empty it into a sink or
other suitable drain, then place it back properly. Do not use the
dryer without having inserted the container back in place.

Cleaning the primary door filter after each cycle (see Fig. B).
Pull the primary door filter out and clean it by removing the lint
from the filter surface under running water or using a vacuum
cleaner.

Cleaning the secondary door filter when the relevant
indicator turns on (see Fig. C).
Pull the secondary door filter out and clean it in all its parts by
washing it under running water or using a vacuum cleaner.

Clogged filters – clean both door filters (see Fig. B, Fig. C).
For optimal performance, dry the filters before inserting
them back in place.
Do not use the dryer without having inserted all filters back
in place properly first.

The filters are essential parts for drying. They are intended
to collect the lint formed during the drying process. In case
of clogged filters, the air flow inside the dryer would be
seriously affected: the drying time would be longer, the
energy consumption would increase and the dryer could be
damaged. If these procedures are not carried out properly,
the dryer may not start.

Autoclean

The maintenance of the bottom filter of this model is
automatic. The dryer carries out cleaning when the sensors signal
the need to do so. In this case, the machine goes on working even
when the drying cycle is completed. An indicator on the control
panel will signal the maintenance. Do not switch the machine
off during this phase.

Cleaning the tumble dryer

The external metal, plastic and rubber parts can be cleaned
with a damp cloth.
Clean the front air intake grille regularly (every 6 months)
with a vacuum cleaner to remove any lint, fluff or dust
deposits. Furthermore, remove any lint deposits from the
filters area, using a vacuum cleaner every so often.
Do not use solvents or abrasives.

TRANSPORT AND HANDLING

Never lift the dryer by holding on to its top side.

1. Unplug the dryer
2. Remove the water from the water tank completely.
3. Make sure that door and water tank are properly closed.

Power consumption

off-mode (Po) – Watts| 0.5
left-on mode (Pl) – Watts| 2
Programs| Kg| kWh| Minutes
Eco | 9| 2.12| 250
Eco| 4.5| 1.2| 160
Synthetics| 4| 0.63| 90
This is the reference programme for the energy label and suitable to
dry normal wet cotton laundry. This is the most efficient programme
in terms of energy consumption for drying wet cotton laundry.
(Standard/Default starting configuration)

Heat Pump System

The heat pump contains fluorinated greenhouse gases,
contained in a hermetically sealed unit. This sealed unit contains
0.18 kg of the R134a gas. GWP = 604 (1 t CO2).

PRODUCT DESCRIPTION

1. Water Tank (A)
2. Air Intake grille
3. Door filter: primary (B), secondary (C)

TROUBLESHOOTING

Before contacting the After-sales Service, refer to the table below. Often the malfunctions are minor and can be solved in few minutes.

Note: Some models are auto-cleaning and not equiped with bottom filter. Please refer to the care and maintenance section.

Standard documentation and additional product information can be found by:

Visiting our website www.whirlpool.com.hk / www.whirlpool.com.sg
Alternatively, contact our After-sales Service (See phone number in the warranty booklet).

When contacting our After-sales Service, please state the codes provided on your product’s identification plate.