EcoDim ECO-DIM.10 WiFi LED-Dimmer-Modul 200W Instruction Manual

EcoDim ECO-DIM.10 WiFi LED-Dimmer-Modul 200W

IMPORTANT! Please Read this manual carefully before installation.

• It is dangerous if people without proper training will work on an electrical installation!
• There may be a dangerous voltage at the output of the dimmer!
• When working on the wiring, always switch off the main voltage. Failure to observe this warning may result in death or serious injury!
• Read the instructions carefully. Incorrect installation may damage the dimmer beyond repair.

PRODUCT DESCRIPTION

• WiFi support
• Compatible with most WiFi smarthome apps (Tuya)
• Voice support (via Google Assistant/Amazon Alexa)
• Works with retractive switch and home automation systems
• Optimal dimmability & light stability
• 200W LED
• MIN, MAX and Speed adjustment
• Installation with existing 2 wires (connecting a 3rd/neutral wire optionally)
•  Soft-start system
• Silent dimming

Specifications

• Input voltage: 220 – 240 Vac, 50Hz
• Power (load)
  • 200WLED
  • 200W Halogen light bulbs
• Suitable for: Led-, halogen-, incandescent bulbs
• Type dimmer: R,L,C Leading Edge & Trailing Edge
• Working temperature: 0°c
• Operation: Push Dimming by Retractive Switch Voice Control
• Dimensions: 45.145.119.8mm
• Weight: 35.4g

DIMENSION

Installation

1. Turn off the power
   To prevent electrical shock and/or equipment damage, disconnect electrical power at the main fuse or circuit breaker before installation and maintenance. Be aware that even if the circuit breaker is off, some voltage may remain in the wires – before proceeding with the installation, be sure no voltage is present in the wiring. Take extra precautions to avoid accidentally turning the device on during installation.

2. Connect the device exactly according to the diagrams shown below
   The dimmer is available for 2-and-3 wired connection. Please note in case of a 2-wired connection port 3 and Load must be connected to make stable dimming possible.

3. Turn the power back on.

Installation

For the SMART dimmer to work optimally or suitable for your preference, you can adjust the brightness at the Min. and Max. level and also the dimming speed with the MIN./MAX./Dimming Speed adjustment.

• MIN adjustment
  switch on the lighting using the retractive switch. Then push the retractive switch until the light output is on its minimum level. Are your lights blinking? Then slowly turn the MIN potentiometer to the right with a screwdriver till you get stable light. Is the light already stable? Then slowly turn the MIN potentiometer to the left for an even better dimmability, until just before the point the lights start to blink. That is the best dimmability of the led lamps.

• MAX adjustment
  SWitch on the lighting using the retractive switch. Then push the retractive switch until the light output is on its maximum level. Are your lights blinking? Then slowly turn the MAX potentiometer to the left with a screwdriver till you get stable light. Is the light already stable? Then slowly turn the MAX potentiometer to the right for an even better dimming range, until just before the point the lights start to blink. That is the best dimmability of the led lamps.

• Dimming Speed adjustment
  Insert a screwdriver in Speed, clockwise to increase the dimming speed when you push the retractive switch and vice versa.

WiFi Setting

1. Inclusion to a WiFi Network

   • Step 1.
     Download compatible APP on Apple store or Google play.
     Compatible APP:
     Google Assistant/Home I Amazon Alexa I Ned1s I Trust I Woox Hombfl I Homeyfux I Ca/ex I Krwdvat I LSC Smart connect

   • Step 2.
     Make sure the phone connected to 2.4G WiFi {5G is not supported).

   • Step 3.
     Follow the APP instruction to create an account if you don’t have one.

  *  **Step 4. Pairing device**
  *  **Auto Scan:** Push the reset button on the WiFi dimmer tin the indicator start blinking blue. Tap+ > Add Device > Auto Scan. The discovery process wiM begin. When your product is discovered, tap ‘next:
  *  **Add Manually:** Push the reset button on the WiFi dimmer till the indicator start blinking blue. Tap•+• on the right corner, choose lighting on the left row, choose light source (BLE+WiFi), Confirm your Wi-Fi details and tap ‘confirm! This will begin the pairing process, which will add your Wi-Fi dimmer to the app,
  *  **Step 5,**  

Once pairing is complete, you can edit your Wi-Fi dimmer name  (optional) Note: if adding the device failed, it may be a network problem, you can now try to using the Bluetooth mode for adding the device.

2. Use as an on-off switch
   • Step 1. Be sure your light is on.
   • Step 2. Press the ‘reset’ button 7 times. When you press for the 7th time, hold the ‘reset’ button until the light starts blinking. Release the button.
   • Step 3. When the light stops blinking, turn of the light. The light can be used as an on-off switch now.
3. Use as an dimming switch (standard)
   • Step 1. Be sure your light is on.
   • Step 2. Press the ‘reset’ button 8 times. When you press for the 8th time, hold the ‘reset’ button until the light starts blinking. Release the button.
   • Step 3. When the light stops blinking, turn off the light. The light can be used as an dimming switch now.
4. Switch to RL (Leading edge/ Triac)
   • Step 1. Be sure your light is on.
   • Step 2. Press the ‘reset’ button 5 times. When you press for the 5th time, hold the ‘reset’ button until the light starts blinking. Release the button.
   • Step 3. When the light stops blinking, turn off the light. The light can be used for Leading edge lamps now.
5. Switch to RC (Trailing edge/ Tronic) – DEFAULT –
   • Step 1. Be sure your light is on.
   • S tep 2. Press the ‘reset’ button 4 times. When you press for the 4th time, hold the ‘reset’ button until the light starts blinking. Release the button.
   • Step 3. When the light stops blinking, turn off the light. The light can be used for Trailing edge lamps now.

Reduction of connected load by PowerFactor

When calculating the LED connected load of the dimmer, take the Power-Factor of the dimmable LED lighting into account. See the global calculation below for this. Nominal power = number of LED light sources Nominal power LED/ PowerFactor.
Example: 10 lamps (SW per lamp/ 0.8 PowerFactor) = 62.5 Watt

Connect

Manuals concerning the connection of the Eco Dim smart dimmer with various known apps can be found on this page:
Go to: www.ecodim.nl/downloads-smart-dimmer

ABOUT COMPANY

• EcoDim
• Dr. Huber Noodtstraat 89
• 7001DV Doetinchem.
• The Netherlands
• info@ecodim.nl
• +31 (0)314 844691

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>