emos H4051 Smart Camera User Manual

H4051 Smart Camera
User Manual

H4051

H4051 Smart Camera

IP Camera

Package contents:

Camera / Power adapter / USB cable / Mount / Adhesive tape / Screws / Protective tape / Manual

Technical specifications:

Power supply: DC 5 V/1 A
Dimensions: 57 × 57 × 71 mm
Net weight: 180 g
Resolution: 1 920 × 1 080
Sensor: 1/2.9‘‘ 2 Megapixel CMOS
IR range: Night vision up to 10 m
Lens: 3.6 mm, F2.0
Storage: SD card (max. 128 GB), Cloud storage, NVR
APP: EMOS GoSmart for Android and iOS
Connection: 2.4 GHz WIFI (IEEE802.11b/g/n)
Maximum number of users: 6

Description of the device: fig. 1
A – Microphone
B – Status LED
LED flashing red: device waiting for connection to Wifi.
LED glowing blue: camera working correctly.
LED glowing red: device not working.
C – SD card slot (max. 128 GB)
D – Speaker
E – Power supply
F – RESET button
Pressing and holding RESET for 5 s resets the device to factory settings.
Pressing and holding RESET for 1 s activates manual Wifi setting mode.

Installing the camera on the ceiling: fig. 2a/2b
1. Place the enclosed mount onto a clean surface.
2. Install it using the enclosed screws.
3. Install the camera onto the mount.
Installing the camera onto an uneven surface: fig. 3
Attach the adhesive tape onto the underside of the mount.
Place the camera with the mount onto the chosen spot.
Attaching protective tape: fig. 4
If needed, you can attach the enclosed protective tape onto the edge of the camera to protect it from damage.
Installing the EMOS Go Smart app: fig. 5
The app is available for Android and iOS on Google play and App Store.
Download the application by scanning the corresponding QR code.
Router setting: fig. 6
The camera only supports 2.4 GHz Wifi (not 5 GHz).
EMOS Go Smart mobile app: Fig. 5a
Open EMOS Go Smart and confirm the privacy policy by tapping agree.
Fig. 5b
Choose sign up.
Fig. 5c
Enter a valid e-mail address and choose a password.
Confirm the privacy policy by tapping agree.
Choose log in.
Fig. 6a
Choose add device.
Fig. 6b
Choose the corresponding product category.
Fig. 6c
Choose the correct type of product.
Fig. 6d
Connect the device to power.
Fig. 6e
Make sure the LED on the device is flashing.
Confirm by tapping next.
Fig. 6f
Enter the name of the Wifi network and password.
Confirm by tapping next.
Fig. 6g
A QR code will appear on the screen of your device.
Place the QR code in front of the lens of the camera unit.
Confirm that you have heard an audio signal for successful pairing.
Fig. 6h
The device will be detected automatically.
Fig. 6i
The device has been found.
Confirm by tapping done.
Connectivity: Wi-Fi 2.4 GHz IEEE 802.11b/g/n
Frequency band: 2.400–2.4835 GHz
Hereby, EMOS spool. s r.a.. declares that the radio equipment type H4051 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is  available at the following internet address: http://www.emos.eu/download.
Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for information about collection points. If the electronic devices would be disposed on landfill, dangerous substances may reach groundwater and subsequently food chain, where it could affect human health.

Serves: EMOS SI, dioxo., Rimsky cesti 92,
3311 Demeter v Savinjski dolina, Slovenia
tell: +386 8 205 17 21
e-mail: reklamacije@emos-si.si

References

• Ke stažení - EMOS | Elektro eshop a velkoobchodEMOS | Elektro eshop a velkoobchod
• EMOS | Elektro eshop a velkoobchodEMOS | Elektro eshop a velkoobchod

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>