EMOS ZM3301 LED Ceiling Luminaire Light User Manual
- June 3, 2024
- EMOS
Table of Contents
EMOS ZM3301 LED Ceiling Luminaire Light
Installation Instruction
LED Ceiling Luminaire
LED luminaire is designed for indoor use to be mounted on a solid base.
Ingress Protection IP44 – for indoor use
Mounting
Mount the lamp firmly onto a solid basis, for example a wall, a ceiling and
like that.
Connect the power cord to the mains 230 V AC.
Connecting conductor must not be connected to the mains at time of
installation. This operation can be carried out only by an authorized person.
WARNING
- The luminaire can be connected only to the electric distribution network, whose installation and protection complies with the applicable standards.
- Before any manipulation or servicing of the luminaire disconnect the luminaire from AC power. This operation can be carried out only by an authorized person.
- The protection from dangerous contact voltage is ensured by „earthing“.
- In case of any damage to any part of the luminaire, don’t use it.
- LED chips inside the luminaire are not replaceable.
- Don’t change inner wiring of the luminaire.
- In case of broken cover don’t use the luminaire and replace broken cover with new one immediately
ZM3301 / ZM3302
This product contains a light source of energy efficiency class
Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for information about collection points. If the electronic devices would be disposed on landfill, dangerous substances may reach groundwater and subsequently food chain, where it could affect human health.
Customer Support
www.emos.eu
tel: +386 8 205 17 21
e-mail:reklamacije@emos-si.si
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>