EMOS H4030 IP Door Camera Unit User Manual

EMOS H4030 IP Door Camera Unit User Manual

Package contents

Wi-Fi doorbell
Cover (rain hood)
Wireless chime
Solar panel
Li-ion 18 650 batteries
Connecting cable
Mounting material – screws
Manual

Technical specifications

Wi-Fi doorbell
Power supply: 2 200 mAh
Solar panel: 1.5 W
Resolution: 1 920 × 1 080
Lens: 2.69 mm JX-F37
Lens angle: 110°
PIR range: up to 4 m
Storage: SD card (max. 64 gb), Cloud storage
Enclosure rating: IP44
Maximum number of users: 10
APP: EMOS GoSmart for Android and iOS
Connection: 2.4 GHz WIFI (IEEE802.11b/g/n)

Wireless chime
Power supply: 3× AA (LR6) 4.5 V DC
Frequency: 433.92 MHz ±250 kHz
Range: ca. 80 m (open space)

Description of the device: fig. 1a

A – Microphone
B – PIR sensor
C – Photoresistor
D – Lens
E – Status LED

• LED flashing red and green: Battery charging.

• LED flashing red: Waiting for network configuration.

• LED flashing green: Configuring network.

• LED glowing green: Working correctly.

• LED glowing yellow: Powered from an external source, charging complete, no batteries detected
  (note: If no batteries are inserted, the indicator only glows yellow).

• LED not glowing red and green: Weak power supply in standby mode.

F – Ring button

Description of the device: fig. 1b

A – RESET button
B – SD card slot
C – USB port
D – Power supply
E – Input – door lock control
F – Alarm sensor
G – Battery slot

Description of the device: fig. 1c

A – Status LED

• LED flashing red: Working correctly.
• LED glowing red: Voltage dropped below 3.3 V.

B – Speaker
C – Operating mode
D – Ringtone selection
E – Ringtone volume

• Low
• Medium
• High

Installation: fig. 2

1. Mount the cover (rain hood) of the doorbell onto a wall using the enclosed screws.
2. The mounting height of the doorbell from the ground should be 1 400–1 600 mm.
3. Make sure the PIR sensor is protected from direct sunlight.
4. Connect the power supply to the input of the doorbell according to the diagram.
5. Mount the doorbell using the screw on the underside according to the diagram.

Pairing the wireless chime with the Wi-Fi doorbell: fig. 3

• Press and hold the button for 3 seconds until you hear a „ding-dong“ sound.
• Then, press the ring button on the Wi-Fi doorbell.
  The unit will make a sound and glow blue, indicating successful pairing.

Unpairing the wireless chime from the Wi-Fi doorbell:

• Press and hold the button for 5 seconds until you hear a double „ding-dong“ sound.
• The devices are now unpaired.

Connecting the system: fig. 4

The device only provides a volt-free contact for controlling the electric door lock. Therefore, the device requires an external power source to function properly.

1. Make sure there are batteries inside the Wifi doorbell.
2. Place the solar panel in a place where it will have as much direct sunlight as possible for the majority of the day

Installing the EMOS GoSmart app: fig. 5

iPad

iOS

Android

iOS

Android

The app is available for Android and iOS on Google play and App Store.
Download the application by scanning the corresponding QR code

Router setting: fig. 6

The camera only supports 2.4 GHz Wifi (not 5 GHz).

EMOS GoSmart mobile app

Fig. 7a
Open EMOS GoSmart and confirm the privacy policy by tapping agree.

Fig. 7b
Choose sign up.

Fig. 7c
Enter a valid e-mail address and choose a password.
Confirm the privacy policy by tapping agree.
Choose log in.

Fig. 8a
Choose add device.

Fig. 8b
Choose the corresponding product category.

Fig. 8c
Choose the correct type of product.

Fig. 8d
Connect the device to power.

Fig. 8e
Make sure the LED on the device is flashing.
Confirm by tapping next.

Fig. 8f
Enter the name of the Wifi network and password.
Confirm by tapping next.

Fig. 8g
A QR code will appear on the screen of your device.
Place the QR code in front of the lens of the camera unit.
Confirm that you have heard an audio signal for successful pairing.

Fig. 8h
The device will be detected automatically.

Fig. 8i
The device has been found.
Confirm by tapping done.

Connectivity: Wi-Fi 2.4 GHz IEEE 802.11b/g/n
Frequency band: 2,400–2,4835 GHz

Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for information about collection points.
If the electronic devices would be disposed on landfill, dangerous substances may reach groundwater and subsequently food chain, where it could affect human health.

Hereby, EMOS spol. s r.o. declares that the radio equipment type H4030 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.emos.eu/download

References

• EMOS | Elektro eshop a velkoobchodEMOS | Elektro eshop a velkoobchod
• Ke stažení - EMOS | Elektro eshop a velkoobchodEMOS | Elektro eshop a velkoobchod

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>