VOLIBeL B0CS6GR2RZ Wi-Fi Smart Door Lock Installation Guide

VOLIBeL B0CS6GR2RZ Wi-Fi Smart Door Lock

This guide contains important information about your lock. Please keep this guide.

Overall

Tips: Spec1f1cat1ons are subject to change without prior notice.

Parts List

Adjustable Deadbolt Latch Set

1. TO CONVERT BACKSET FROM 2-3/8″ ( 60mm) TO 2-3/4″ ( 70mm)
   • Rotate the latch in an anticlockwise direction, then pull and twist the extension plate out.
2. To CONVERT BACKSET FROM 2-3/4″ ( 70mm) TO 2-3/8″ ( 60mm)
   • Rotate the latch in an anticlockwise direction, then push and twist the extension plate in.

Installation Guide

1. INSTALL THE LATCH AND STRIKING PLATE

• A: Install striking plate and hole-aligning device in the door frame with two screws provided.
• B: Insert latch into the hole in side of the door with the and screw latch into the door with two screws provided.

IMPORTANT: Please make sure the latch bolt is fully retracted ( in the unlocked position) before installation.

INSTALL THE EXTERIOR ASSEMBLY AND INTERNAL ASSEMBLY

Quick Set Up
Settings: In the initialized state! Press 888# to switch left open right open, left open left row light on, right open right row light on.

Admin settings: To wake up the screen light before pressing*#:

Add admin code.

Delete Admin

User settings
Add user ( fingerprint or code or card )

Delete user

System settings

1. Voice settings.
2. Unlock mode.

Restore factory settings
The Initial Admin Code is 123456. It is required that you set a new admin code. ( Code 6 to 8 digits )

Warning:
The door lock must be set a new admin code (not the initial admin code 123456 from the factory).
The first new admin code set by the door lock must not be deleted.

1. The initial admin code of the factory admin of this product is “123456”, and the initial admin code “123456” will be deleted automatically after entering the admin information.
2. Fingerprint and code input error 5 times in total in any way, and then alarm, the device sounds alarm sound, and the door lock can not be used within 90 seconds.
3. when the prompt for the first time “voltage low, please replace the battery”, according to different battery capacity can also unlock about 100 times, at this time should be replaced in time, so as not to use inconvenience caused by battery exhaustion.
4. It is recommended to replace all batteries every 6 months.
5. Virtual code anti-peeping function: Follow the code type in: code ; Irrelevant codes added to anti-peep. then to confirm. The code must be included in what you type.

Operation instructions for the “Tuyasmart” APP to unlock the lock remotely:

• Download and install the application “Tuyasmart” on the mobile phone (as shown in the picture)
• Open the “Tuyasmart” application and enter the “registration” interface. Click “mobile phone number/email address” to register the relevant mobile phone number or email address, or bind the relevant QQ account or WeChat account for registration.
• Smart lock networking settings:
• After registration, it will automatically enter the main menu interface, click “Add Manually” at the top of the screen to enter the “Add Manually ” interface, and click “Security &Video Surveillance” to slide to the category of “Smart Lock”, and click “Lock (Wi-Fi) The page will automatically jump to the Select Wi-Fi interface, Select Connect to a 2.4G WiFi hotspot or a WiFi hotspot without a password, and click “Next” after successfully connecting.
• After registration, it will automatically enter the main menu interface, click “Add Manually” at the top of the screen to enter the “Add Manually” interface, click “Security &Video Surveillance” to slide to the category of”Smart Lock”, and click “Lock (Wi-Fi) The page will automatically jump to the Select Wi-Fi interface, Select Connect to a 2.4G WiFi hotspot or a WiFi hotspot without password, and click “Next” after successfully connecting.
• Gently touch the wake-up smart lock interface and press* “to request unlocking. After receiving the unlocking request, the WeChat control interface of the mobile phone will automatically pop up “Is it allowed to open the door remotely this time?”, and click “OK” to unlock the lock remotely under the condition that it is safe.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>