EMOS ZC0110, ZC0111 LED Orientation Luminaire User Guide
- June 3, 2024
- EMOS
Table of Contents
EMOS ZC0110, ZC0111 LED Orientation Luminaire
DIMENSION
ZC0110
ZC0111
INSTALLATION
LED Orientation Luminaire – Built-in
The LED Luminaire is designed to be installed onto a solid base in indoor or
outdoor areas. Enclosure: IP65 – for outdoor environments.
Inspect the Luminaire before use. If any part is damaged, do not use the
product. Before assembly, make sure power supply is disconnected. In case of
malfunction, do not try to repair or dismantle the Luminaire. The LEDs are not
replaceable. Failure to observe any instructions provided in the manual may
result in personal injury or property damage.
Installation
The installation box must be firmly fixed in the wall/base to prevent its damaging. Attach the Luminaire securely to a fixed base in the wall. Connect the power cable for connecting to a 230 V~ power network. The conductor must not be connected to power supply at the time of Luminaire installation
WARNING
- The Luminaire is only suited for fixed installation.
- The Luminaire can only be connected to an electrical network with installation and protection in line with valid regulations and standards.
- Before interfering with the Luminaire or performing maintenance and repair, the Luminaire must be disconnected from the power network. This must only be performed by a person knowledgeable in valid regulations on qualification for such activities.
- Protection against dangerous contact voltage is ensured through earthing.
- Immediately take the Luminaire out of operation if any portion of the Luminaire becomes damaged.
- LEDs inside the Luminaire are not replaceable.
- Do not interfere with the internal wiring of the Luminaire.
- Never cover the Luminaire with materials for thermal insulation.
- If the Luminaire cover becomes damaged, do not use the Luminaire and immediately replace the cover with a new one.
Type| Power supply| Input power| Luminous flux| Chromatic temperature| Product
size| Installation opening
---|---|---|---|---|---|---
ZC0110| 220–240 V~,
50/60 Hz
| 2 W| 65 lm| 4 000 K| 123 × 53 mm| 113 × 43 × 65 mm
ZC0111| 220–240 V~,
50/60 Hz
| 2 W| 70 lm| 4 000 K| 80 × 80 mm| 70 × 70 × 65 mm
Do not cover the Luminaire with material for thermal insulation
EMOS spol. s r.o. declares that the ZC0110, ZC0111 is in compliance with the essential requirements and other relevant provisions of Directive. The device can be freely operated in the EU. The Declaration of Conformity can be found at http://www.emos.eu/download
DISPOSAL
Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for information about collection points. If the electronic devices would be disposed on landfi ll, dangerous substanoes may reach groundwater and subsequently food chain, where it could affect human health.
This product contains a light source of energy efficiency class F
WARRANTY STATEMENT
- We declare that we guarantee the features and flawless operation during the warranty period.
- The warranty period begins on the date of delivery of the goods and is valid for 24 months.
- EMOS SI, d.o.o. guarantees the buyer that he will remedy all defects at his own expense within the warranty period on the device due to a factory defect in material or workmanship.
- The warranty period is extended for the duration of the repair.
- If the device is not repaired within 45 days from the date of notification of the defect, the affected party may make a request a new one or a refund of the amount paid.
- The warranty ends if the defect is caused by:
- non-professional-unauthorized service
- modifications without the approval of the manufacturer
- failure to follow the instructions for use of the device
- The warranty does not exclude the consumer’s rights arising from the seller’s responsibility for product defects.
- Unless otherwise indicated, the warranty is valid in the territory of the Republic of Slovenia.
- The manufacturer provides repair, maintenance of goods, spare parts and trailers for a fee appliances three years after the warranty period has expired.
- Natural wear and tear of the device is excluded from the warranty obligation. The same applies to injuries caused by improper use or overloading.
INSTRUCTIONS FOR THE COMPLAINT PROCEDURE
The owner asserts a warranty claim by reporting the identified defect to an
authorized workshop (EMOS SI, d.o.o., Rimska cesta 92, 3311 Šempeter in
Savinjska dolina) in writing or orally. The buyer is responsible, if late
registration causes damage to the device. After the warranty period expires,
the right to asserting a warranty claim. A certified warranty card with the
original invoice must be attached.
EMOS SI, d.o.o. undertakes to replace the device with a new one if it is not
delivered within this warranty period worked flawlessly.
- BRAND: Orientation LED light – built-in
- TYPE:
- GOODS DELIVERY DATE :
- Service : EMOS SI, d.o.o., Rimska cesta 92, 3311 Šempeter in Savinjska dolina, Slovenia
- phone: +386 8 205 17 21
- e-mail : reklamacije@emos-si.si
References
- Ke stažení - EMOS | Elektro eshop a velkoobchodEMOS | Elektro eshop a velkoobchod
- ist.Im
- EMOS | Elektro eshop a velkoobchodEMOS | Elektro eshop a velkoobchod
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>