Midea JHSD268SS Hybrid Refrigerator or Freezer User Manual
- June 5, 2024
- Midea
Table of Contents
Midea JHSD268SS Hybrid Refrigerator or Freezer User Manual
Safety warnings
Warning
Warning: risk of fire / flammable materials
RECOMMENDATIONS
This appliance is intended to be used in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential type environments; bed and breakfast type environments; catering and similar non- retail applications.
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
The appliance has to be unplugged after use and before carrying out user maintenance on the appliance.
WARNING: Risk of fire / flammable materials.
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
WARNING:Please abandon the refrigerator according to local regulators for it use flammable blowing gas and refrigerant.
WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.
WARNING: Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
Do not use extension cords or ungrounded(two prong)adapters.
DANGER: Risk of child entrapment.Before you throw away your old refrigerator or freezer:
- Take off the doors.
- Leave the shelves in place so that children may not easily climb inside.
The refrigerator must be disconnected from the source of electrical supply before attempting the installation of accessory.
Refrigerant and cyclopentane foaming material used for the refrigerator are flammable.Therefore, when the refrigerator is scraped, it shall be kept away from any fire source and be recovered by a special recovering company with corresponding qualification other than be disposed by combustion, so as to prevent damage to the environment or any other harm.
For EN standard: This appliance can be used by children aged from 8 years and above and persons with reduce physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
For IEC standard: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.)
Meaning of safety warning symbols
Prohibition symbol
This is a prohibition symbol.
Any incompliance with instructions marked with this symbol may result in
damage to the product or endanger the personal safety of the user.
Warning symbol
This is a warning symbol.
It is required to operate in strict observance of instructions marked with
this symbol; or otherwise damage to the product or personal injury may be
caused.
Note symbol
This is a cautioning symbol.
Instructions marked with this symbol require special caution. Insufficient
caution may result in slight or moderate injury, or damage to the product.
This manual contains lots of important safety information which shall be observed by the users.
Electricity related warnings
-
Do not pull the power cord when pulling the power plug of the refrigerator. Please firmly grasp the plug and pull out it from the socket directly.
-
To ensure safe use, do not damage the power cord or use the power cord when it is damaged or worn.
-
Please use a dedicated power socket and the power socket shall not be shared with other electrical appliances. The power plug should be firmly contacted with the socket or else fires might be caused.
-
Please ensure that the grounding electrode of the power socket is equipped with a reliable grounding line.
-
Please turn off the valve of the leaking gas and then open the doors and windows in case of leakage of gas and other flammable gases. Do not unplug the refrigerator and other electrical appliances considering that spark may cause a fire.
-
Do not use electrical appliances on the top of the appliance, unless they are of the type recommended by the manufacturer.
Warnings for using
-
Do not arbitrarily disassemble or reconstruct the refrigerator, nor damage the refrigerant circuit; maintenance of the appliance must be conducted by a specialist
-
Damaged power cord must be replaced by the manufacturer, its maintenance department or related professionals in order to avoid danger.
-
The gaps between refrigerator doors and between doors and refrigerator body are small, be noted not to put your hand in these areas to prevent squeezing the finger. Please be gentle when close the refrigerator door to avoid falling articles.
-
Do not pick foods or containers with wet hands in the freezing chamber when the refrigerator is running, especially metal containers in order to avoid frostbite.
-
Do not allow any child to get into or climb the refrigerator; otherwise suffocation or falling injury of the child may be caused.
-
Do not place heavy objects on the top of the refrigerator considering that objectives may fall when close or open the door, and accidental injuries might be caused.
-
Please pull out the plug in case of power failure or cleaning. Do not connect the refrigerator to power supply within five minutes to prevent damages to the compressor due to successive starts.
Warnings for placement
-
Do not put flammable, explosive, volatile and highly corrosive items in the refrigerator to prevent damages to the product or fire accidents.
-
Do not place flammable items near the refrigerator to avoid fires.
-
The refrigerator is intended for household use, such as storage of foods; it shall not be used for other purposes, such as storage of blood, drugs or biological products, etc.
-
Do not store beer, beverage or other fluid contained in bottles or enclosed containers in the freezing chamber of the refrigerator; otherwise the bottles or enclosed containers may crack due to freezing to cause damages.
Warnings for energy
- Refrigerating appliances might not operate consistently (possibility of defrosting of contents or temperature becoming too warm in the frozen food compartment) when sited for an extended period of time below the cold end of the range of temperatures for which the refrigerating appliance is designed.
- The fact that effervescent drinks should not be stored in food freezer compartments or cabinets or in low-temperature compartments or cabinets, and that some products such as water ices should not be consumed too cold;
- The need to not exceed the storage time(s) recommended by the food manufacturers for any kind of food and particularly for commercially quick-frozen food in food-freezer and frozen-food storage compartments or cabinets;
- The precautions necessary to prevent an undue rise in the temperature of the frozen food while defrosting the refrigerating appliance, such as wrapping the frozen food in several layers of newspaper.
- The fact that a rise in temperature of the frozen food during manual defrosting, maintenance or cleaning could shorten the storage life.
- The necessity that, for doors or lids fitted with locks and keys, the keys be kept out of the reach of children and not in the vicinity of the refrigerating appliance, in order to prevent children from being locked inside.
Warnings for disposal
Refrigerant and cyclopentane foaming material used for the refrigerator are flammable. Therefore, when the refrigerator is scraped, it shall be kept away from any fire source and be recovered by a special recovering company with corresponding qualification other than be disposed by combustion, so as to prevent damage to the environment or any other harm.
When the refrigerator is scraped, disassemble the doors, and remove gasket of door and shelves; put the doors and shelves in a proper place, so as to prevent trapping of any child.
Correct Disposal of this product:
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.
Proper use of refrigerators
Placement
-
Before use, remove all packing materials, including bottom cushions, foam pads and tapes inside of the refrigerator; tear off the protective film on the doors and the refrigerator body.
-
Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or watery places to prevent rust or reduction of insulating effect.
-
Do not spray or wash the refrigerator; do not put the refrigerator in moist places easy to be splashed with water so as not to affect the electrical insulation properties of the refrigerator.
-
The refrigerator is placed in a well-ventilated indoor place; the ground shall be flat, and sturdy (rotate left or right to adjust the wheel for levelling if unstable).
-
The top space of the refrigerator shall be greater than 30cm, and The refrigerator should be placed against a wall with a free distance more than10cm to facilitate heat dissipation.
Precautions before
installation:
Information in the Instruction Manual is only for reference. The physical
product may differ.
Before installation and adjusting of accessories, it shall be ensured that the
refrigerator is disconnected from power. Precautions shall be taken to prevent
fall of the handle from causing any personal injury.
Door handle installation
precautions shall be taken to prevent fall of the handle from causing any personal injury.
List of tools to be provided by the user
| Cross screwdriver
(The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor).
Assembly steps
- a. Remove the screw hole caps ① from the door, and use cross screwdriver to fix screws ③ into the screw hole tightly.
- b. Assemble the screw hole caps ④ on the screw hole of handle.
- c. The reverse operation is for disassembly.
Levelling feet
Schematic diagram of the levelling feet.
(The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor)
Adjusting procedures:
- a. Turn the feet clockwise to the refrigerator;
- b. Turn the feet counterclockwise to lower the refrigerator;
- c. Adjust the right and left feet based on the procedures above to a horizontal level.
Door Right-Left Change
-
Power off the refrigerator, and remove all objects from the door trays.
-
Dismantle the screw hole caps ,screws and handle, and remove the plastic screw hole caps from the other side.please refer to chapter 2.2.
-
Dismantle the upper hinge cover, screws and upper hinge, and remove the hole cover from the other side. unplug the wiring connector on the right side of refrigerator to (①,②,③wiring connector).
-
Dismantle the door and right bottom hinge assembly(hinge shaft&adjustable foot&hinge), disassemble the right bottom hinge assembly,and assemble the hinge shaft and adjustable foot on the other side of hinge, then assemble the whole hinge assembly on the other side of refrigerator.
-
Remove the door upper cover, install the upper hinge sleeve , door signal line to the other side and install the door upper cover.
Dismantle the right door stopper,sleeve pipe from the right bottom of door, insert the sleeve pipe into hinge hole of left bottom of door, and take out left door stopper from the accessory bag, and assemble it on left bottom of door, the right door stopper could be reserved for future use.
-
Take out the left top hinge , left top hinge cover from accessories package;
Place the door on bottom hinge ,and mount left top hinge.
Connect signal line terminal ⑤with signal line terminal① connect signal line terminal ⑥ to the door switch connect signal line terminal ② with signal line terminal④.
Mount top hinge cover and hole cover.
-
For the assembly of handle, please refer to chapter 2.2
Starting
-
Before initial start, keep the refrigerator still for half an hour before connecting it to power supply.
-
Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or for above 4 hours in summer when the ambient temperature is high.
-
Spare enough space for convenient opening of the doors and drawers.
-
The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor.
Energy saving tips
- The appliance should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of the direct sunlight.
- Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
- Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up inside the appliance.
- Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with cold air circulation, making the appliance less efficient.
- Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.
Structure and functions
Key components
(The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor)
Refrigerator
- The Refrigerator is suitable for storage of a variety of fruits, vegetables, beverages and other food consumed in the short term.
- Cooking foods shall not be put in the refrigerating chamber until cooled to room temperature.
- Foods are recommended to be sealed up before putting into the refrigerator.
Freezer
- The freezer may keep food fresh for a long time and it is mainly used to store frozen foods and making ice.
- The freezing chamber is suitable for storage of meat, fish, rice balls and other foods not to be consumed in short term.
- Chunks of meat are preferably to be divided into small pieces for easy access. Please be noted food shall be consumed within the shelf time.
The appliance has the function of refrigerator -freezer transition, by operating on display panel, end-consumers could select refrigerator or freezer in accordance with their requirement.
Functions
-
Key
A. temperature setting button
B. Fridge/Freezer switch button -
Temperature icons
-
Setting 1: the setting temperature is 8 or -16 ℃
-
Setting 2: the setting temperature is 6 or -18 ℃
-
Setting 3: the setting temperature is 4 or -20 ℃
-
Setting 4: the setting temperature is 3 or -22 ℃
-
Setting 5: the setting temperature is 2 or -24 ℃
-
Setting 6: quick cooling or quick freezing.
-
When the fridge power is on:
All temperature icons shine within 3s after power on, for power on at the first time, the default set temperature is -20℃ After that, every time you start the fridge, it will run in accordance with the set temperature before last power off.
Display of normal running
On the occurrence of a failure, the corresponding icons will give a combined blink: the error codes and types are shown as follows:
Refrigerator
Error Code
| Error Description|
Display
---|---|---
E1| Temperature sensor of Refrigerator room fail| Icon ” ” & Icon” 2 ”
shine at same time
E5| Defrosting sensor of Refrigerator room fail| Icon ” ” & Icon” 3 ”
shine at same time
E6| Communication error| Icon ” 2 ” & Icon” 4 ” shine at same time
E7| Ambient temperature sensor fail| Icon ” ” & Icon” 4 ” shine at same
time
E10| Sticking problem with Button| Icon ” 2 ” & Icon” 3 ” shine at
same time
Freezer
Error Code
| Error Description|
Display
---|---|---
E1| Temperature sensor of Freezer room fail| Icon ” ” & Icon” 24 ” shine
at same time
E5| Defrosting sensor of Freezer room fail| Icon ” ” & Icon” 22 ” shine at
same time
E6| Communication error| Icon ” 24 ” & Icon” 20 ” shine at same time
E7| Ambient temperature sensor fail| Icon ” ” & Icon” 20 ” shine at same
time
E10| Sticking problem with Button| Icon ” 24 ” & Icon”22 ” shine at
same time
If no failure, the screen displays the setting temperature of the refrigerator room.
Fridge/Freezer conversion
Press the botton for 3 seconds to achieve Fridge/Freezer conversion, the corresponding temperature icons shine.
Temperature setting
The temperature setting will be changed once you press button( ). Then, the
refrigerator will run according to the new temperature setting after 15s.
Quick cooling mode
Enter: under refrigerator mode,press the button( ) until the icon lighten
During quick cooling mode, the refrigerator runs according to the temperatures set at 2℃,and it will exit this mode automatically after running for 150 minutes or temperature setting or mode setting.
Quick freezing mode
Enter: under freezer mode,press the button( ) until the icon lighten.
During quick freeze mode, the freezer runs according to the temperature set at -24℃,it will exit this mode automatically after running for 24 hours or temperature setting or mode setting.
Maintenance and care of the appliance
Overall cleaning
- Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect and energy saving. The interior of the refrigerator should be cleaned regularly to avoid odor. Soft towels or sponge dipped in water and non-corrosive neutral detergents are suggested for cleaning. The freezer of shall be finally cleaned with clean water and dry cloth. Open the door for natural drying before the power is turned on.
- Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as toothpastes, organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items clean refrigerator considering that this may damage the fridge surface and interior.
- Do not rinse with water so as not to affect the electrical insulation properties.
Please unplug the refrigerator for defrost and cleaning.
Defrosting
- The refrigerator is made based on the air-cooling principle and thus has automatic defrosting function. Frost formed due to change of season or temperature may also be manually removed by disconnection of the appliance from power supply or by wiping with a dry towel.
Out of operation
- Power failure: In case of power failure, even if it is in summer, foods inside the appliance can be kept for several hours; during the power failure, the times of door opening shall be reduced, and no more fresh food shall be put into the appliance.
- Long-time nonuse: The appliance shall be unplugged and then cleaned; then the doors are left open to prevent odor.
- Moving: Before the refrigerator is moved, take all objects inside out, fix the glass partitions, vegetable holder, freezing chamber drawers and etc. with tape, and tighten the leveling feet; close the doors and fix them with tape. During moving, the appliance shall not be laid upside down or horizontally, or be vibrated; the inclination during movement shall be no more than 45°.
The appliance shall run continuously once it is started. Generally, the operation of the appliance shall not be interrupted;otherwise the service life may be impaired.
Trouble shooting
You may try to solve the following simple problems by yourself. If them cannot be solved, please contact the after-sales department.
Failed operation| Check whether the appliance is connected to power or whether
the plug is in well contact Check whether the voltage is too low Check whether
there is a power failure or partial circuits have tripped
---|---
Odor| Odorous foods shall be tightly wrapped Check whether there is any rotten
food Clean the inside of the refrigerator
Long-time operation of the compressor| Long operation of the refrigerator is
normal in summer when the ambient temperature is high It is not suggestible
having too much food in the appliance at the same time Food shall get cool
before being put into the appliance The doors are opened too frequently
Doors cannot be properly closed| The door is stuck by food packages Too much
food is placed The refrigerator is tilted
Loud noise| Check whether the floor is level and whether the refrigerator is
placed stably Check whether accessories are placed at proper locations
Door seal fails to be tight| Remove foreign matters on the door seal Heat the
door seal and then cool it for restoration (or blow it with an electrical
drier or use a hot towel for heating)
Water pan overflows| There is too much food in the chamber or food stored
contains too much water,resulting in heavy defrosting The doors are not closed
properly, resulting in frosting due to entry of air and increased water due to
defrosting
Hot housing| Heat dissipation of the built-in condenser via the housing, which
is normal When housing becomes hot due to high ambient temperature, storage of
too much food or shutdown of the compressor is shut down, provide sound
ventilation to facilitate heat dissipation
Surface condensation| Condensation on the exterior surface and door seals of
the refrigerator is normal when the ambient humidity is too high. Just wipe
the condensate with a clean towel.
Abnormal noise| Buzz: The compressor may produce buzzes during operation, and
the buzzes are loud particularly upon start or stop. This is normal. Creak:
Refrigerant flowing inside of the appliance may produce creak, which is
normal.