ECHOMASTER EFS-FTOBD2LT Fleet Tracker Owner’s Manual
- June 9, 2024
- Echomaster
Table of Contents
ECHOMASTER EFS-FTOBD2LT Fleet Tracker Owner’s Manual
Thank you for purchasing the EchoMaster
EchoMaster Fleet Solution tracking products are designed to improve fleet safety, visibility, and compliance as well as helping to reduce operating costs with proactive maintenance notification.
Please ensure you read and understand all aspects of the manual before installing or using the EchoMaster products.
WHAT’S INCLUDED:
- ODB2 plug-and-play device
- Manual
- Serialized security zip tie
REQUIRED ACCESSORIES
NOTE: CABLES ARE REQUIRED FOR ALL HEAVY DUTY TRUCKS THAT HAVE A COMMUNICATION PORT OTHER THAN THE *ODB2 STYLE. IT IS IMPORTANT TO PROVIDE THE VEHICLES IDENTIFICATION NUMBER (VIN) WHEN ORDERING THE EFS OBD2HD MODULE TO CONFIRM THE VEHICLES CABLE TYPE OR VISUALLY INSPECT THE VEHICLE AND REQUEST THE REQUIRED CABLE.
6-9 PIN VEHICLE ADAPTER (EFS-6PHAR + EFS-PT1YHAR)|
---|---
9 PIN TYPE 1 BLACK CABLE (EFS-PT1YHAR)|
9 PIN TYPE 2 GREEN CABLE (EFS-PT2YHAR)|
FEATURES
- Autodetect for J1708/J1939 protocols
- Driver behavior detection
- True odometer detection
- Vehicle VIN identification detection
- Fuel efficiency monitoring
- Internal battery
- Proactive vehicle maintenance monitoring
- High voltage supported
- Bluetooth BLE for AOBRD/ELD
- OTAP-Wireless firmware updates
- Tamper Alert notification
INSTALLATION GUIDE
STEP 1
INSTALLATION PREPARATION INSTRUCTION
Locate the vehicle’s diagnostic communication port, the port will be located under the vehicle’s dashboard area usually below the steering column or in the lower driver’s side kick panel.
STEP 2:
FITTING INSTRUCTIONS
PREPARE THE HARDWARE
Attach the EchoMaster EFS-FTOBD2HD device onto the accessory harness required for the specific vehicle you are working on.
CONNECT THE INTEGRATION CABLE TO THE VEHICLE
Remove the vehicle’s communication port and attach it to the accessory cable’s
male connector.
SECURE THE CABLES
Once everything is connected, mount the new cable head using the screw down mount or the flanged collar to the dashboard of the vehicle. Mount the EFS- FTOBD2HD device up in the dash ensuring that it has a clear line of sight of the sky and mounted away from any electrical sources. Be sure the device will not interfere with the moving vehicle controls.
STEP 3:
FINALIZE YOUR INSTALL
COMPLETE THE INSTALLATION
Once the EFS-FTODB2HD is in place, start the vehicle’s engine and let it run outside for five minutes, allowing the device time to read the vehicle’s network and receive the identification number (VIN). Note: the vehicle must be outside with an unobstructed.
ADD THE SECURITY SEAL
EchoMaster provides a security zip tie to ensure the EFS-FTOBD2HD device
stays securely in place. Install the security zip tie around the device and
the accessory harness and cut off the excess cable tie.
We recommend recording the serial number located on the serial number security zip tie, on the serial number card located in the box, before installing it around the OBD2 device.
STEP 4:
ADD THE ASSET TO YOUR WEBSITE APPLICATION
-
Login to emfleetmonitor.com
-
Click the settings gear in the upper right corner.
-
Select Vehicles from the left menu.
-
Select Add Vehicle from the upper right corner.
- Select Add Vehicle from the upper right corner.
- Fill out the vehicle’s information and save.
- Select Devices from the left menu.
-
In the list of devices, find the device you just installed. Click the“>” symbol on the right side to open that device, and assign it to the vehicle you just added.
-
Once the device has been assigned, click back to the map view to confirm that the location and status is correct for the vehicle that was just set up.
STEP 5:
IF YOU PURCHASED THE OPTIONAL ELD TRACKING ADDON, ADD THE VEHICLE TO THE ELD TRACKING APPLICATION (POWERED BY M2M IN MOTION)
OVERVIEW
- Start the vehicle and leave it running
- Open the M2M in Motion APP (Available in the Google Play Store and the Apple App Store)
- Login to the M2M in Motion ELD APP using a driver user account
- Choose the vehicle you want to connect to
- On the main APP dashboard, tap the “Connect” button which is located below the APP header to display the “Connect to Vehicle” dialog box
- At this point, two options are present in order to establish a connection to the VBUS device: Manual Connection and Auto Connection.
MANUAL CONNECTION
-
Tap on the “Manual Connection” button.
-
If the Bluetooth of the device is disabled, the “Bluetooth Permission Request” dialog box will be displayed.
Tap on the YES button to Enable the Bluetooth device
-
Choose the correct Bluetooth device from the list.
-
It will then display the VBUS Progress dialog box upon establishing a connection to the selected ELD device along with a “Stop Connection” and “Ok” buttons
- Tap “Stop Connection” to stop establishing VBUS
- Tap OK button to hide the VBUS Progress dialog
-
If the VBUS connection results in an error (given the following situations below), an error dialog box will display
VBUS Connection Error Interrupted Internet Connection VBUS Power Failure
Note: The app will automatically disconnect from the device after attempting to connect for 1 minute and 30 seconds without receiving any data from the VBUS device.
Upon establishing a connection to the VBUS device you should hear a tone letting you know that the device is now connected.
To check if you are connected, navigate to the Main Dashboard and the VBUS status indicator should be displayed as “Connected” which is located on the app header.
The device and the application are now connected.
AUTO CONNECTION
- Tap on the Connect button
- The VBUS Progress dialog box will then display
- Upon establishing a connection to the VBUS device, you should hear a tone letting you know that the device is now connected.
Prerequisites to successfully perform an Auto Connection
- Create a Pre-configured device in the Portal’s Equipment Management Page or in the App’s Manage
- Vehicles/Trailers screen
- Set the ELD configurations
Note: Only users with Asset admin roles can create equipment in the app.
SPECIFICATION CHART
| OPERATING VOLTAGE | 8V to 24 v |
|---|---|
| BATTERY | 300mah Li-ion polymer |
| CURRENT CAPACITY | 110uA sleep mode,30mA active |
| SIZE | 2.55 in x 1.92 in x 1.02 in |
| BAND OPERATION | Dual band UMTS/HSDPA |
| HOST PROTOCOL | AT commands, UDP |
| HOST PROTOCOL | ELD, PTCRB, FCC |
Customer Support
Phone – 866-931-8021
E-Mail – support@aampglobal.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>