Scigiene IN2200-H Digital Mini Incubators Instruction Manual

: June 12, 2024
: Scigiene

Table of Contents

Scigiene IN2200-H Digital Mini Incubators
PRODUCT INFORMATION
Product Specifications:
Product Set-Up:
Product Operation:
Care and Maintenance:
Product Specifications
Product Set-Up
Product Operation
Care and Maintenance
ABOUT COMPANY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Scigiene IN2200-H Digital Mini Incubators

Scigiene-IN2200-H-Digital-Mini-Incubators-fig-1

PRODUCT INFORMATION

The Sci-TempTM Digital Mini Incubators are compact and versatile devices designed for various laboratory applications. With a capacity of 20L, these incubators offer precise temperature control for optimal sample incubation.

Product Specifications:

Capacity: 20L
Temperature Range: IN2200-H
Dimensions (Internal): wxdxh 26 x 23.5 x 32.5 cm (10.25 x 9.25 x 12.75)
Dimensions (External): wxdxh 33.5 x 37x 47.5 cm (13.25 x 14.5 x 18.75)
Weight: 6.5 kg (15 lbs)
Warranty: 2 years
Electrical: 100-240VAC, 50/60Hz

Product Set-Up:

To set up the incubator:

Place the incubator on a clean, level, and stable surface.
Plug the power cord into the back of the unit.
Plug the electrical cord into a properly grounded outlet.
Press the power button on the front display to turn on the incubator.

Product Operation:

To operate the incubator:

To select the desired temperature, press the Up or Down key on the display.
The display will start flashing, allowing you to adjust the temperature using the Up and Down keys.
Once the desired temperature is selected, the display will stop flashing, and the chamber will start heating or cooling accordingly.

WARNING: When loading samples, avoid placing them directly in front of the fan vents to minimize airflow and maintain optimal temperature performance.

The incubator is equipped with an internal light to assist in viewing. To activate the internal light, press the Light button. Press the Light button again to turn off the internal light.

Care and Maintenance:

No routine maintenance is required other than keeping the instrument clean. When cleaning, use a damp cloth to wipe down the internal or external parts of the incubator. Avoid using solvents as they may damage the product housing. Additionally, ensure that the fan vents are clear of dirt or any obstructions.

Scigiene’s Sci-Temp Mini Incubator is a micro-processor controlled instrument designed for providing accurate temperatures up to +60°C. With large incubation chambers and removable shelves, the Sci-Temp incubator is useful for a wide variety of laboratory applications.

Product Specifications

Capacity: 20L
Temperature Range:
IN2200-H 20°C to 60°C (Heat Only Model)
Temperature Accuracy: +/-0.5°C (37°C) Temperature Uniformity: +/-1°C (37°C)
Dimensions (Internal): wxdxh 26 x 23.5 x 32.5 cm (10.25 x 9.25 x 12.75”)
Dimensions (External): wxdxh 33.5 x 37x 47.5 cm (13.25 x 14.5 x 18.75”)
Weight: 6.5 kg (15 lbs)
Warranty: 2 years
Electrical: 100-240VAC, 50/60Hz

Product Set-Up

Place the incubator on a clean, level and stable surface. Plug the power cord into the back of the unit, then plug the electrical cord into a properly grounded outlet. Once plugged in, press the power button on the front display.

Product Operation

To select the desired temperature, press the “Up” or “Down” key. The display begins to flash and now the “Up” and “Down” keys can be used to choose the desired temperature. Once the desired temperature has been selected, the display stops flashing and the chamber begins to heat or cool accordingly.
WARNING: When loading samples, always avoid placing samples directly in front of fan vents. This will minimize airflow and diminish temperature performance.
The incubator is also equipped with an internal light to assist in viewing. To active the internal light, press the “Light” button. To turn off the internal light, press the “Light” button again.

Scigiene-IN2200-H-Digital-Mini-Incubators-fig-2

Care and Maintenance

No routine maintenance is required other than to keep the instrument clean. When cleaning, use a damp cloth to wipe down the internal or external parts of the incubator. Avoid the use of solvents as they may attack the product housing. In addition, always ensure that the fan vents are clear of dirt or any other obstructions.