tzumi MEGA Bass V3 LED Jobsite Speaker User Guide

tzumi MEGA Bass V3 LED Jobsite Speaker

Introduction & Features

The MegaBass V3 Speaker is the new reliable speaker that you can use anywhere! It’s a great way to get your music heard, whether you’re at the beach or at an indoor party. Equipped with a subwoofer, the MegaBass V3 Speaker is great for almost any occasion! Additional features include Bluetooth functionality, a 3.5mm AUX jack, a MicroSD card slot, USB support, and FM radio.

Package Contents

• MegaBass V3 Speaker
• Micro-USB Charging Cable
• User Guide

Product Overview & Functions

Charging the Speaker

• The speaker has an internal rechargeable battery.
• The battery should be fully charged prior to using the speaker.
• To charge the speaker, plug one end of the Micro-USB cable into the Micro-USB port, and the other end into a USB power source.
• While the speaker is charging, the charging indicator light will be red.
• Once the speaker is fully charged, the indicator light will turn off.
• Charging time is approximately 2-3 hours.

Note: When the speaker’s battery power is low, it will emit a low-power alarm. When the battery level is critically low, it will automatically shut down.

Pairing Devices to the Speaker

• Make sure that the Bluetooth function is available on your device.
• Specific pairing procedures will differ depending on your device.
• Turn the speaker on by turning the volume control knob.
• The speaker will automatically enter Bluetooth pairing mode.
• Keep the distance between your device and the speaker within 3 feet for pairing.
• Activate Bluetooth on your device and search for available devices.
• Select “Tzumi MegaBass V3” from the devices list and follow the prompts to finish the pairing process.
• After successfully pairing the devices, a voice prompt will say “Bluetooth Connected.”

Note: After successfully pairing, the devices will remember each other. No pairing will be needed next time.

HOW TO USE

How to Play Music using a MicroSD card

• When the speaker detects a MicroSD card, it will automatically enter MicroSD mode.
• Simply load your MicroSD card with your favorite music in MP3 format, insert it into the speaker’s MicroSD card slot, and the music will start playing.

How to Play Music using AUX Mode

• When connecting a device via the AUX port, the speaker will automatically detect it and enter AUX Mode.
• An AUX cable allows you to play music/audio from any phone or computer,
• Plug one end of a 3.5mm audio cable into the speaker’s AUX port, and the other end into a phone or computer

How to Play Music using FM Mode

• Press the Mode/Light button to switch to FM Mode.
• The FM frequency range is between 87.5 MHz -108.0 MHz.
• Press and hold the Play/Pause button. The MegaBass V3 Speaker will scan and store all available stations.
• Press the Previous or Next button to cycle through the saved stations.

Note: This speaker uses an internal FM antenna.

Controlling the Speaker Lights

• Press and hold the Mode/Light button to turn the speaker lights ON/OFF.

Specifications

• Speaker Type: 8″ subwoofer
• Power: 10W
• Bluetooth Version: 5.0
• Signal to Noise Ratio: 85dB
• Battery: 1200mAh
• Charging Time: 2-3 Hrs.
• Play Time: 3 Hrs.
• Measurements: 8.8 x 7.7 x 14.5 in.
• Weight: 3.5 Ibs.

Battery Disposal

This product contains a lithium-polymer battery. Lithium-polymer batteries are environmentally safe when they are fully discharged. You cannot dispose of this product along with the household waste. It must be disposed of safely at a hazardous waste collection site, recycling facility, or at an electronic retailer that recycles. Check your local or state laws for disposal procedures.

Safeguards

• Do not use this unit for anything other than its intended use.
• Keep the unit away from heat sources, direct sunlight, humidity, water, or any other liquid.
• Do not expose the device to extremely high or low temperatures, as that might damage the battery.
• Do not operate the unit if it is wet or damp to prevent electric shock and/or injury to yourself and damage to the unit.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Keep the unit out of the reach of children.
• This unit is not a toy.

FCC STATEMENT

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules and industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• reorient or relocate the receiving antenna.
• increase the separation between the equipment and the receiver.
• connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• consult the dealer or an experienced radio/tv technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

If you have any other questions or issues with using the MegaBass V3 Speaker, please contact tzumi Technical Support at: support@tzumi.com or 1-855-GO-TZUMI.

MegaBass v3 LED Jobsite Speaker. Distributed by tzumi inc. NY, NY.
Copyright 2023 tzumi Inc. All Rights Reserved. Made in China.

All pictures shown are for illustration purposes only. All other trademarks and trade names on this user guide are those of their respective owners. Actual products may vary due to product enhancement. Subject to change without prior notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>