Shenzhen Guoruida Electronics K1 Wireless Microphone Outdoor Indoor Live Interview Eating Broadcast Radio User Manual

June 6, 2024
Shenzhen Guoruida Electronics

Wireless Microphone

User Manual

K1 Wireless Microphone - Labels

MADE IN CHINA

Introduction

Thanks for choosing our product.

This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in online live broadcast, video Vlog shooting, program interview, recording, video teaching and other occasions.

The wireless Microphone consists of two parts, one is Microphone transmitter, the other one is Phone receiver. (See as below picture)

K1 Wireless - Transmitter

(Lightning receiver)

(Type-C receiver)

(Microphone transmitter)

ID Diagram
  1. Windproof net
  2. Microphone indicator
  3. Microphone Type-C charging port
  4. Microphone clip
  5. Switch key
  6. Receiver indicator
  7. Lightning/Type-C port to connect phone

Some Android phones may have incompatibility problems due to system, please consult your dealer for details

How to use

Step 1: Connect the Type-C receiver to phone with Type-C port. The red light on receiving flashes.

K1 Wireless - Use Step 1

*Apple users need to connect the adapter

Step 2: Press switch key of microphone, the indicator light turns green, and then power is turned on.

K1 Wireless - Use Step 2

  1. Switch key

Step 3: The indicator green light of receiver green light keeps always on, then open the phone camera, live App or other Apps, and then to use the microphone to receive sound.

K1 Wireless - Use Step 3 - 1

  1. Indicator green tight always on
About Ul

Microphone Transmitter

Function How to use Light
Power on Press switch key once Green light on
Power off Press switch key about 3 seconds/Auto power off if no reconnection
in 3 min
Noise reduction mode the default noise reduction mode is turned on Green

light on
In reverb mode| triple-click the button to turn on/off mixing| turn on the green light and flash 2 times, and turn off the red light flash 2 times
Pause/resume recording| click the button for 1 second| pause the green light slowly flashing/resume the green light steady on.
Charging| Charging with Type-C cable| Red Light keeps on when charging, and Light off when fully charged
Pairing| | Red Green lights flash alternately
Paired| | Green light keeps on
Low battery alarm| Battery is below 20%| Red light flashes every 10s

Type-C Receiver

Function How to use Light
Power on Plug in the device Green light on
Power off Plug off the device Light off
Pairing Green light flashes slowly
Paired Green Light on
Packing List

Content of packing

(1) Microphone transmitter
(2) Phone receiver
(3) Type-C charging cable
(4) Microphone clip
(5) Windproof net
(6) User manual

Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter
The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals