Canon PIXMA G2010 All In One for High Volume Printing Instruction Manual
- June 9, 2024
- Canon
Table of Contents
- Canon PIXMA G2010 All In One for High Volume Printing
- How to Hold Printer
- Checking Included Items
- Removing Packing Materials
- Installing the Cartridge
- Preparing the Ink System
- Connecting to Computer
- Loading Paper
- Access Online Manual
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Canon PIXMA G2010 All In One for High Volume Printing
How to Hold Printer
Explanatory Movies
Checking Included Items
Removing Packing Materials
- Remove the packing materials (such as orange tape) from outside the printer.
- Open the scanning unit/cover.
- Remove the orange tape and the protective material and discard them.
Installing the Cartridge
- Open the cartridge locking cover.
- Take out the C (color) cartridge from the package and remove the label.
- Remove the protective tape.
- Insert the C (color) cartridge on the left.
- Repeat steps 2 to 4 to insert the B (black) cartridge on the right.
- Close the cartridge locking cover and push it down.
- Press down both joint buttons.
Turning on Printer
- LIFT UP the scanning unit/cover, and then close it.
- Connect the power cord.
- Do not connect any cables except the power cord yet.
- Press the ON button.
- Confirm that (Ink icon) and are displayed on the screen.
- If a different screen appears, refer to “If any of the following screens appear” on page 3 to resolve the error.
Pouring Ink
This product requires careful handling of ink. Ink may splatter when the ink tanks are filled with ink. If ink gets on your clothes or belongings, it may not come off.
- Open the scanning unit/cover.
- Open the ink tank cover.
- Grab and remove the tank cap of the ink tank.
- Hold the ink bottle upright and remove the bottle cap.
- Insert the nozzle of the ink bottle into the inlet and stand the ink bottle upside down.
- Pour all ink into the ink tank. Confirm that the ink has been filled to the upper limit line (A).
- Replace the tank cap securely.
- Close the ink tank cover.
- Repeat steps 2 to 8 to pour all ink into the corresponding ink tanks on the right according to the label.
- Confirm that the ink has been filled to the upper limit line (A).
- LIFT UP the scanning unit/cover, and then close it.
Preparing the Ink System
- Press the Black button and confirm that (Ink icon) disappears.
- Ink preparation takes about 5 to 6 minutes. Proceed to the next page.
If any of the following screens appear
- The cartridges are not installed correctly.
- “3. Installing the Cartridge”
- No cartridges are installed.
- “3. Installing the Cartridge”
- The protective materials are not removed.
- “2. Removing Packing Materials”
- Ink is not prepared normally.
- Press the ON button to restart the printer, and then see “5. Pouring Ink”
- Waiting to prepare ink.
- “6. Preparing the Ink System”
- If you have not poured ink into the ink tank yet, see “5. Pouring Ink”
For all other cases, refer to the Online Manual.
Connecting to Computer
You need a connection setup for each computer. Proceed with the setup from
step 1 for each computer.
If you use the printer while it is not connected to a computer, confirm that
1 is displayed on the printer’s screen. The setup is now complete.
- Start the setup file for either method A or method B.
Downloading from the Internet
- Open a web browser ( etc.) on your computer.
- Input the following URL and access the Canon website.
- Select Set Up.
- Input the model name of your printer and click OK.
- You can select a model name from the list.
- Click Setup.
- The procedures for Windows are shown below. If you are using a computer with an OS other than Windows, do the setup according to the on-screen instructions.
- Click Download and download the setup file.
- Execute the downloaded file.
Using Setup CD-ROM (Windows Only)
When using Windows 10 or Windows 8.1
- Load the Setup CD-ROM in your computer.
- When the following message appears on the right side of your computer screen, click it.
- If the following screen appears, click Run Msetup4.exe.
- If the User Account Control dialog box appears, click Yes.
When using Windows 7
- Load the Setup CD-ROM in your computer.
- When the AutoPlay screen appears, click Run Msetup4.exe.
- If the User Account Control dialog box appears, click Continue.
- Click Start Setup.
- If the following screen appears, click Exit.
The setup is complete when 1 appears on the printer’s screen. You can print from your computer.
Loading Paper
- Open the paper support.
- Slide the right paper guide to the end.
- Load paper with the print side facing up.
- Slide the right paper guide to align it with the side of the paper stack.
- Pull out the paper output tray.
- Open the output tray extension.
Copying
- Make sure the printer is turned on.
- Load plain LTR or A4 size paper.
- Open the document cover and load the document face down on the platen glass. Align the document with the alignment mark ( ).
- Close the document cover.
- To make more than one copy, use the + button to set the desired number of copies.
- Press the Black button (A) for black & white copying.
- Press the Color button (B) for color copying.
- The printer starts copying.
Access Online Manual
From browser
From desktop shortcut
Read Safety and Important Information (addendum) first
© CANON INC. 2017
PRINTED IN XXXXXXXX