logitech Zone Vibe 100 Wireless Headphone User Guide

: June 9, 2024
: Logitech

Table of Contents

KNOW YOUR PRODUCT
BOX CONTENT
CONNECT YOUR HEADPHONES
HEADPHONES CONTROLS
CHARGING
DIMENSIONS
SYSTEM REQUIREMENTS
TECHNICAL SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

logitech Zone Vibe 100 Wireless Headphone User Guide

KNOW YOUR PRODUCT

Front view:

Back view:

Bottom view:

BOX CONTENT

Zone Vibe 100 wireless headphones
Charging cable
Travel bag
User documentation

POWER ON /OFF

Slide the switch in the arrow’s direction to the middle to power on the headphones.
Once powered on, the LED light will slightly turn white.
There will be a voice prompt that tells you the battery status.

CONNECT YOUR HEADPHONES

Connect via BLUETOOTH®

Slide the switch to the bottom in the arrow’s direction for 2 seconds to initiate pairing.
The LED light will flash white rapidly.
Open Bluetooth® settings on your device.
Select Logi Zone Vibe 100 in discoverable devices.
Once successfully paired, the LED light will turn solid white.

ADJUSTING HEADPHONES

Adjust the headphones by sliding earcups up and down the extended part of the headband.
It may be easier to adjust the headphones on your head. Slide the earcups up and down the headband until they sit comfortably on your ears.

HEADPHONES CONTROLS

For UC controls:

Note:

Media control functionality depends on the type of application.
Call activities are always the first priority. When two Bluetooth® devices are connected, the last active device will override the other.

Tip: Music EQ controls available on Logi Tune.

MUTE

There are 2 ways to mute your microphone.

Press the button to mute.
Flip up or down the mic boom to mute or unmute.
Voice notifications indicate when the microphone is on / off mute.

Note:

User-triggered behaviors, such as Bluetooth® pairing, will be prioritized then revert back to its previous status once the behavior is completed.

CHARGING

To conserve battery life, headphones automatically power off after 30 minutes without usage. Sleep timer could be adjusted in Logi Tune. The LED light on the headphones will blink slowly in RED when the battery is low.
CHARGING

Charging via USB cable

Plug one end of the cable to the USB-C port on the bottom of the earcup and the other end into the USB-C charging port on your computer.
The LED light will start breathing white when charging.
The LED light will turn solid white when fully charged.
- 2 hours will fully charge the battery.
- 5 minutes will give you 1 hour of playback.
The headphones can be used with Bluetooth® paired while charging.

LOGI TUNE
Logi Tune helps boost your headphones performance with periodic software and firmware updates. It is recommended to update your headphones. To do so, download Logi Tune from www.logitech.com/tune

ADJUSTING SIDETONE
Sidetone lets you hear your own voice during conversations so you are aware of how loud you are talking. In Logi Tune, select the sidetone feature, and adjust the dial accordingly.

A higher number means you hear more external sound.
A lower number means you hear less external sound.

AUTO SLEEP TIMER
By default, your headphones will automatically power off when not in use for 30 minutes. Adjust the sleep timer in Logi Tune. To wake up your headphones, try sliding off/on the power switch again.

RESET YOUR HEADPHONES

Power the headphones on.
Press and hold the call button and volume ’–’ button for 5 seconds.
The LED light will quickly blink from red to white for 3 times and then turns off when your headphones are successfully reset.
The headphones will turn off after reset.

DIMENSIONS

Headphones: Height x Width x
Depth: 183.03 x 169.68 x 73 mm Weight: 0.185 Kg
Earpad: Height x Width x Depth: 98.6 x 75.44 x 19.3 mm

SYSTEM REQUIREMENTS

Works with common calling applications across almost all platforms and operating systems. Works with Windows, Mac, or Chrome-based computers via Bluetooth® and iOS or Android Bluetooth-enabled devices.

TECHNICAL SPECIFICATIONS

Microphone Type: Dual omni-directional MEMS mics with directional beamforming and DSP
Frequency response (Speaker): 20-20kHz (music mode), 100-8kHz (talk mode)
Frequency response (Microphone): 100-8kHz
Talk time up to 18 hrs
Listen time up to 20 hrs
Bluetooth® version: 5.2
Wireless range: Up to 30 m / 100 ft (open field line of sight)
Cable length (USB-C charging cable) : 4.9 ft (1.5 m)

www.logitech.com/support/zonevibe100

© 2022 Logitech. Logitech, Logi and the Logitech logo are trademarks or registered trademarks of Logitech Europe S.A. and/or its affiliates in the U.S. and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Logitech is under license. Windows, Mac, Chrome, iOS, Android and other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.