CyberPower PR750LCD3C Smart App UPS Series User Guide
- June 9, 2024
- CyberPower
Table of Contents
CyberPower PR750LCD3C Smart App UPS Series
YOUR ULTIMATE ALLY IN POWER
SMART APP UPS SERIES
PR750LCD3C
LCD FUNCTION SETUP GUIDE
LCD OPERATION GUIDE
Display Interface
- Power Button/Power on Indicator
- Online Indicator
- Fault/Warning Indicator
- On Battery Indicator
- Battery Fault Indicator
- Display Screen
- Menu Button
- Esc Button
- Up Button
- Down Button
- Enter Button
Basic Operation
Press Up/Down Button to scroll through the UPS status. Press Esc button to go back to top.
Menu /Item
- Status
- Operation Mode
- Input Voltage Information
- Output Voltage Information
- Estimated Runtime
- Battery Information
- Load Information
- UPS Temperature
- Date & Time
LCD Setting Guide
Press Menu Button to enter Setup Menu and use Up/Down Button to scroll through menus. Press Enter Button to go into the selected menu and use the Up/Down Button and Enter But-ton to select the setting item and to complete the setting. Esc Button is pressed to exit the submenu and go back to previous page.
Menu/ Item
- Basic Setup
- Utility Power Quality
- Sensitivity
- Ambient Setup
- ECO On/Off
- LED Brightness
- LCD Hibernation
- Cycling Display
- Audible Alarm
LCD Setting Guide – cont.
- Outlet Control
- UPS Configuration
- Test
- Self Test
- Alarm Test
- Logs
- Event 1-10
- About
- UPS Model Name
- UPS Serial Number
- Last Battery Change Date
- Next Battery Change Date
- UPS Firmware Version
- IP Address
- MAC ID
- Advanced Setup
- Output Voltage
- Minimum Output Voltage
- Maximum Output Voltage
- Low Battery Threshold
- Battery Change Date
- Schedule Test
- Date and Time
- Power Meter Rest
- IP Setting
- Subnet Mask
- Gateway
- Wiring Fault
- Firmware Update**
- Back to Default
- Only displayed in standby mode
Menu / Basic Setup
In order to better supply power to the connected equipment, it is recommended to check settings in this menu before you start using your UPS.
Menu / Ambient Setup
The settings in this menu affect the UPS display, alarm and noise. Customize your UPS to meet your needs.
Menu / Outlet Control
Enter the sub-menu “Config UPS” for additional settings of the outlets.
Menu / Test
This menu provides basic tests and calibration for users to check the
current performance of the UPS.
Menu / Logs
All kinds of events are recorded and the UPS will show the last 10 events in
this menu. Events are categorized into four sorts and shown in a capital
letter in a single event log on the LCD screen: (F) Fault, (W) Warning, (S)
Shutdown, and no letter for a normal transfer event
Menu / Advanced Setup
This menu contains more adjustable and detailed items for UPS advanced usage. Read the item descriptions below thoroughly before you change the settings.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>