ARDESTO URM-85M60 Upright Freezer Instruction Manual
- June 9, 2024
- ARDESTO
Table of Contents
- ARDESTO URM-85M60 Upright Freezer
- SAFETY WARNINGS
- GENERAL
- UNPACKING YOUR FREEZER
- SPACE REQUIREMENTS
- ELECTRICAL REQUIREMENT
- USING THE APPLIANCE
- CLEANING YOUR FREEZER
- TROUBLESHOOTING
- CORRECT DISPOSAL OF THIS PRODUCT
- ENERGY SAVING TIPS
- Warranty conditions
- WARRANTY CARD
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ARDESTO URM-85M60 Upright Freezer
SAFETY WARNINGS
- This appliance is intended to be used in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential type environments; bed and breakfast type environments; catering and similar non-retail applications.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- The appliance has to be unplugged after use and before carrying out user maintenance on the appliance.
- WARNING : Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- WARNING: Do not damage the refrigerant circuit.
- WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
- WARNING: Please abandon the refrigerator according to local regulators for it use flammable blowing gas and refrigerant.
- WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.
- WARNING: Do not locate multiple portable socketoutlets or portable power supplies at the rear of the appliance.
- Do not use extension cords or ungrounded (two prong) adapters.
- DANGER: Risk of child entrapment. Before you throw away your old refrigerator or freezer:
- Take off the doors.
- Leave the shelves in place so that children may not easily climb inside.
- The refrigerator must be disconnected from the source of electrical supply before attempting the installation of accessory.
- Refrigerant and cyclopentane foaming material used for the refrigerator are flammable. Therefore, when the refrigerator is scrapped it shall be kept away from any fire source and be recovered by a special recovering company with corresponding qualification other than be disposed by combustion, so as to prevent damage to the environment or any other harm.
- For EN standard: This appliance can be used by children aged from 8 years and above and persons with reduce physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.
- For IEC standard: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.)
- Children should be supervised to ensure that they do not play with the appliance.
- The instructions shall include the substance of the following: To avoid contamination of food, please respect the following instructions:
- Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
- Clean regularly surfaces that can come in contact with food and accessible drainage systems.
- Clean water tanks if they have not been used for 48 h; flush the water system connected to a water supply if water has not been drawn for 5 days. (note 1)
- Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
- Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice-cream and making ice cubes. (note 2)
- One ,two and three-star compartments are not suitable for the freezing of fresh food. (note 3)
- If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.
Note 1,2,3: Please confirm whether it is applicable according to you product compartment type.
Dear customer:
- Thank you for buying this upright freezer. To ensure that you get the best results from your new freezer, please take time to read through the simple instructions in this booklet.
- Please ensure that the packing material is disposed of in accordance with the current environmental requirements.
- When disposing of any Freezer equipment please contact your local waste disposal department for advice on safe disposal.
- This appliance must be only used for its intended purpose.
- This appliance is intended to be used in household and similar applications such as
- staff kitchen areas in shops, offices and other working environments;
- farm houses and by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments;
- catering and similar non-retail applications.
EQUIPMENT
- freezer
- energy sticker
- microfiche
- operating instructions (warranty card included)
GENERAL
This type of refrigerator is widely used in places such as hotels ,offices, student dormitories and houses. It is mostly suitable for refrigerating and preserving foods such as fruits and beverage. It enjoys the advantages of small size, Lightweight, Low electric consumption and easy use.
Main configuration: (optional)
- Thermostat
- Drawer
- Leveler’s leg
NOTE: The images in these operating instructions are for reference only; actual device may differ from images.
- Thermostat
- Drawer
- Leveler’s leg
- thermostat
- Steel wire drawer
- Leveler’s leg
UNPACKING YOUR FREEZER
- WARNING: Use two or more people to move Freezer.
- Failure to do so can result in back or other injury.
- Remove tape and any labels from your Freezer before using(except the rating label).
- To remove any remaining tape or glue, rub the area briskly with your thumb.
- Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
- Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your Freezer.
- When moving the Freezer, do not tilt the Freezer beyond 45°from upright position
CLEANING BEFORE USE
- After you remove all of the packaging materials, (especially the foam between outside condenser and cabinet should be removed) clean the inside of your Freezer before using it.
SPACE REQUIREMENTS
- WARNING: Keep flammable materials and vapors, such as gasoline, away form Freezer.
- Failure to do so can result in death, explosion, fine or burns.
- NOTE: Before performing any type of installation, disconnect the Freezer from the electrical source. When you are finished, connect the Freezer to the electrical source and reset the control to the desired setting.
- To ensure proper ventilation for your Freezer, allow for 200mm space on each side between walls, 200mm space between back of your Freezer and the wall, and 300mm space between counter top and the roof or ceiling.
- If you are installing your Freezer next to a fixed wall, leave sufficient space on the hinge side to allow for the door to swing open.
- Never install your Freezer near heat source and direct sun shins.
ELECTRICAL REQUIREMENT
- WARNING: DO NOT REMOVE GROUND PRONG.
- DO NOT USE AN ADAPTOR.
- DO NOT USE EXTENSION CORD.
- Failure to do so could result in death, fire, or electric shock.
- Before moving the freezer to the working place, it is very important to make sure that the proper electrical equipment is installed there.
RECOMMENDED GROUNDING METHOD
- A 220~240 Volt /50 Hz AC only 10 Ampere fused and properly earthed electrical supply is required. It is recommended that a separate circuit serving only this appliance be provided. Use a receptacle which cannot be turned off with switch or pull chain. Do not use an extension cord.
LEVELING
- If the Freezer is not leveled during installation. The doors may not close or seal properly, causing cooling, frost, or moisture problems. It is very important of the
- Freezer to be level in order to function properly.
- To level your Freezer you may either turn the level leg clockwise to raise that side to the Freezer or turn counter – clockwise to lower that side.
- NOTE: Having someone push against the top of the Freezer take some weight off the leveling leg. This makes it easier to adjust the leveling leg
USING THE APPLIANCE
- To obtain the best possible results form your Freezer, it is important that you operate it properly.
SETTING TEMPERATURE FOR MODEL URM-85M60
- The temperature in the freezer is controlled by the thermostat control knob. It is placed in the top-front of the freezer. Turn the thermostat control knob up or down to regulate the temperature inside the freezer. The markings on control knob indicated the “MIN, NORMAL, MAX and OFF” for the different temperature grades or for power off the appliance. The temperature decreases with position “MIN” being the warmest and position “MAX” being the coldest. Set the control to the «NORMAL> position for normal operation.
SETTING TEMPERATURE FOR MODEL URM-85M90
- The temperature in the freezer is controlled by the thermostat control knob. lt is loaded in the top-front of the freezer. Turn the thermostat control knob up or down to regulate the temperature inside the freezer. The markings on the control knob indicated the “14” for the different temperature grades. The temperature decreases with position “1” being the warmest and position “4” being the coldest.
- Set the control to position between “1” and”4″ for normal use, the exact position is beyond the temperature in the freezer, generally, choose the number c2.
STORE FROZEN FOOD (OPTIONAL)
- When using the freezer for the first time or after defrosting, turn the temperature control to set «4» or «MAX» for at least two hours before introducing the food to be stored.
- All frozen food products you purchase should be placed in the freezer as soon as possible to avoid the frozen food from defrosting.
- Storage recommendation printed on the packaging of frozen food by the manufacturers should be always be followed.
- Be careful that the drawer mustn’t mangle the refrigeration pipeline
- When using the freezer for the first time or after defrosting, turn the temperature control to set “colder” for at least two hours before introducing the food to be stored.
- All frozen food products you purchase should be placed in the freezer as soon as possible to avoid frozen food from defrosting.
- Storage recommendations printed on the packaging of frozen food by the manufacturers should always be followed.
- Be careful that the drawer mustn’t mangle the refrigeration pipeline.
FREEZING FRESH FOOD
- Ensure that your freezing operations are carried out under the most hygienic conditions as freezing alone does not sterilize the food. It is advisable to freeze the food by packing it into separate meal portions and not in bulk form. Never put hot or even warm foodstuffs into the freezer. Prior to storing the frozen food, pack it in plastic bags, aluminum sheets or freezing containers and place into the freezer.
- NOTE: Never put bottled food or drinks in the freezer compartment.
- For best performance, leave enough space in the Freezer compartment for air to circulate around the packages.
NOTE: You can use it without drawer under some conditions.
DEFROSTING
- Remove the mains plug from the wall socket, open the door and remove all the food to a cool place. Defrost using a plastic scraper, or let the temperature rise naturally until the frost melts. Then wipe away the remaining ice and water, after this plug the freezer back into the mains supply.
- NOTE: To avoid damaging the freezing compartment wall, do not use any sharp objects to remove the frost or separate the frozen food.
CLEANING YOUR FREEZER
- Before you start to clean your freezer remove the mains plug from the power supply.
- Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect and energy saving.
- Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft cloth dampened with soapy water or diluted detergent.
- The interior of the refrigerator should be cleaned regularly to avoid odor.
- Please turn off the power before cleaning interior, remove all foods, drinks, shelves, drawers, etc.
- Use a soft cloth or sponge to clean the inside of the refrigerator, with two tablespoons of baking soda and a quart of warm water. Then rinse with water and wipe clean. After cleaning, open the door and let it dry naturally before turning on the power.
- For areas that are difficult to clean in the refrigerator (such as narrow sandwiches, gaps or corners), it is recommended to wipe them regularly with a soft rag, soft brush, etc. and when necessary, combined with some auxiliary tools (such as thin sticks) to ensure no contaminants or bacterials accumulation in these areas.
- Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in the interior of the refrigerator or contaminated food.
- Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy water or diluted detergent.
- Dry with a soft cloth or dry naturally.
- Wipe the outer surface of the refrigerator with a soft cloth dampened with soapy water, detergent, etc., and
- then wipe dry.
- Do not use hard brushes, clean steel balls, wire brushes, abrasives(such as toothpastes), organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items, which may damage the fridge surface and interior. Boiling water and organic solvents such as benzene may deform or damage plastic parts.
- Do not rinse directly with water or other liquids during cleaning to avoid short circuits or affect electrical insulation after immersion.
SHUTDOWN FOR A LONG PERIOD
- If the freezer is not in use for a long period of time, proceed as follows:
- Disconnect the freezer from the main supply by removing the plug from the wall socket.
- Clean and dry the inside as instructed under the heading of cleaning the Freezer.
- Leave the door open to prevent any unpleasant smells from building up while the freezer is not in use.
TROUBLESHOOTING
- In case of malfunction, you can solve many common problems easily.
- Your Freezer is not operate d…Check if
- The power supply cord is unplugged.
- The doors are not closed completely …Check if
- The drawers are out of position.
- The gaskets are dirty.
- The Freezer is not level.
- The freezer is noisy when working… Check if
- Check the freezer is level and that it is not in contact with another appliance or kitchen furniture.
- The freezer does not cool sufficiently… Check if
- If the door has been opened too often, or it has been left open for a while it will take time for the freezer to reach its set temperature.
- Check the airflow the rear of the freezer has not been reduced due to insufficient clearance.
The following characteristics should not be looked upon as a problem.
- A gentle tricking sound caused by coolant flowing the pipe.
- Compressor operating at high temperature.
CORRECT DISPOSAL OF THIS PRODUCT
- This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.
- They can take this product for environmental safe recycling.
REFRIGERATOR DOOR INSTALL GUIDELINES ABOUT SWAPPING LEFT&RIGHT
(OPTIONAL)
- Ensure the Appliance is unplugged and empty.
- Adjust the two leveling feet to their highest position.
- We recommend you have someone to assist you.
- NOTE: To take the door off it is necessary to tilt the Appliance backward.
- You should rest the Appliance on something solid e.g.a chairjust below the top panel.
- Do not lay the Appliance completely flat as this may damage the coolant system.
-
Disassemble the screws behind the fixed roof with cross-slot screwdriver and remove the cover from the refrigerator.
-
Remove the screws fixed the top-hinge with a cross-slot screwdriver.
-
Replace the top-hinge and the door limit block and the door bearing bush to the other side
- A) replace the top-hinge.
- B) Replace the door bearing bush and the limit block.
-
Disassemble the screws fixed the bottom-hinge with cross-slot screwdriver and replace the hinge to the other side then fix it with screws
NOTE: the refrigerator incline angle less 45. -
Replace the leveler to the other side and adjust it to make sure the cabinet level.
-
Set the door right position,fix the top-hinge and then the roof cover.
ENERGY SAVING TIPS
- The appliance should be located in the coolest area of the room, away from heatproducing appliances or heating ducts, and out of the direct sunlight.
- Let hot foods cool to room temperature before placing in the appliance.
- Overloading the appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
- Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up inside the appliance.
- Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with cold air circulation, making the appliance less efficient.
- Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.
Warranty conditions
- The plant guarantees normal operation of the product within 12 months from the date of the sale, provided that the consumer complies with the rules of operation and care provided by this Manual.
- Service life of the product is 5 years.
- In order to avoid any misunderstanding we kindly ask you to carefully study the Owner’s Manual, the terms of warranty, and check the correctness of filling the Warranty Card. The
- Warranty Card is valid only if the following information is correctly and clearly stated: model, serial number of the product, date of sale, clear seals of the company-seller, signature of the buyer. The model and serial number of the product must correspond to those specified in the Warranty Card.
- If these terms are violated, and if the information specified in the Warranty Card is changed, erased or rewritten, the Warranty Card is considered invalid.
- Setup and installation (assembly, connection, etc.) of the appliance are described in the attached documentation; they can be carried out both by the user, and by specialists having the necessary qualification sent by USC or selling companies (on a paid basis). In this case, the person (the institution) installing the appliance shall be responsible for the correctness and quality of installation (setup).
- Please pay attention to the importance of the correct installation of the appliance, both for its reliable operation, and for obtaining warranty and free service. Require the installation specialist to enter all the necessary information about the installation in the Warranty Card.
- In case of failure of the appliance during the warranty period by the fault of the manufacturer, the owner is entitled to free warranty repair upon presentation of the correctly filled Warranty Card together with the appliance in the factory configuration packed in the original packaging to the warranty workshop or the place of its purchase.
- Satisfaction of the customer’s claim due to the fault of the manufacturer shall be made in accordance with the law «On Protection of
- Consumers’ Rights». In the case of warranty repair the warranty period shall be extended for the period of repair and shipment.
WARRANTY CARD
- Dear Buyer! Congratulations on your purchase of the ARDESTO brand appliance, which was designed and manufactured in accordance with the highest quality standards, and we thank you for choosing this particular instrument.
- We ask you to keep the coupon during the warranty period. When purchasing a product, require a full warranty card.
- Warranty service is carried out only if there is a correctly and clearly filled original warranty card, which indicates: product model, date of sale, serial number, warranty service period, and the seller’s seal. *
- The service life of household appliances is 5 years.
- The product is intended for consumer use. When using the product in commercial activities, the seller / manufacturer does not bear warranty obligations, after-sales service is performed on a paid basis.
- Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
- The product is withdrawn from the warranty in case of violation by the consumer of the operating rules set forth in the instruction manual.
- The product is removed from warranty service in the following cases:
- misuse and non-consumer use;
- mechanical damage;
- damage caused by the ingress of foreign objects, substances, liquids, insects;
- damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.)
- damage caused by non-compliance of power and cable network parameters with state standards and other similar factors;
- when operating equipment in the power supply network with a missing single ground loop;
- in case of violation of seals installed on the product;
- lack of serial number of the device, or inability to identify it
- The warranty does not cover consumables and accessories, as well as filters, shelves, drawers, stands and other containers for storing products.
- The warranty period is 12 months from the date of sale.
- Tear-off maintenance tickets are provided by an authorized service center.
- The completeness of the product is checked. I have read the terms of the warranty service, no complaints.
- Customer Signature
- Warranty card
- Product information
- Product
- Model
- Serial number
- Seller Information
- Trade organization name
- The address
- Date of sale
- Seller stamp
Coupon
- Seller stamp
- Date of the application
- Cause of damage
- Date of completion
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>